Smart Watch User Manual
Precautions before use:
1. The company reserves the right to modify the contents of this manual
without any notice. Some functions are different in specific software
versions, which is normal.
2. Please charge the product for more than 2 hours before use.
3. Before using the product, please download and connect the APP on
the mobile phone. Connect the APP to synchronize the watch time and
set personal information. For details, see the instructions for the
subsequent synchronization software.
1： Product Overview
It is recommended to use the mobile phone model version (too low
version may cause connection problems):
Android mobile phone: support operating system version 9.0 or above;
Apple mobile phone: support operating system version 13.0 and above;
2 ： APP download and APP connection
method
1.Scan the QR code below to download the
APP software.
Use the browser to scan the QR code below
or download the QR code from the watch (GloryFit downloads QR
settings.
During
the
download
and code)
installation
process,
please
give
the
corresponding permission to this software to
ensure the normal Bluetooth connection.
The APP software name is GloryFit.
GloryFit application
Special attention:
1. If you haven't used the APP for a long time (12 hours or more), the
APP will be cleaned up by the phone's own IOS system. At this time, the
APP application and the watch are disconnected, and the GloryFit
application function will not be used. If you turn on the push function,
the push function can be used normally. Open the APP application
again, and the watch will be automatically reconnected.
2. After installing the APP software on Android phones, you need to
open the background application startup permission in the phone
settings. Different models of phones will have differences.
1. APP application and watch connection method:
1. Open the downloaded APP and select "Email" or "Third Party Login"
(as shown in Figure 1).
2. After logging in successfully, click "Select Watch" (as shown in Figure
2) to enter the "Add Device" interface, and click to select the Bluetooth
name of the device you purchased (as shown in Figure 3) to connect
successfully.
(Figure 1)
(Figure 2)
(Figure 3)
The watch can be paired with the mobile app in the app.
Note: For the IOS system, you need to enter: Settings - Bluetooth,
ignore Bluetooth pairing, and completely unbind.
3： Main functions of smart watch
1 Basic operation
1.1 Turn on: When the watch is turned off, press and hold the watch side
button for 3 seconds to turn on the watch; In standby mode, briefly
press the side button to wake up the watch.
1.2 Shutdown: When the watch is on, press and hold the side button for
3 seconds or select shutdown in the setting to enter the switch selection
interface and select“ ×” Exit the shutdown interface and select "√" to
shut down directly.
1.3 The watch interface switching operation is shown below:
1. Slide the dial interface from top to bottom to enter the status bar
shortcut interface
2. Slide the dial interface from right to left to enter the function
interface
3. Slide the dial interface from left to right to enter the side split screen
interface
4. Slide the dial
interface from bottom
to top to enter the
message notification
interface
Dial operation interface Status bar interface
1.4 The status bar interface displays the functions of mobile phone
search, brightness adjustment, about, setting, connection status, and
power display.
2. Dial switch
Press and hold the screen for 2 seconds in the dial interface to enter the
switch interface, slide the screen left and right to switch the dial, and
select the dial with a single point.
3. Status
The step counting function is enabled by default after the device is
powered on, and the step counting data and heat of the day are
displayed in real time. After the watch is successfully paired with the APP,
the motion data will be automatically synchronized (or manually
refreshed) and uploaded to the APP, including the steps, distance,
calories and other parameters.
4. Sports
2.4.1 Sports modes include: outdoor running, cycling, rope skipping,
swimming, badminton, etc., totaling 114 kinds.
Note: The motion data will not be saved to the APP terminal, but can
only be viewed on the watch terminal.
5. Sleep monitoring
The default sleep monitoring time of the watch is
from 18:00 to 12:00 the next day. If you wear a watch
to sleep, the watch will automatically judge whether
you enter the sleep monitoring mode, automatically
detect
your
sleep
quality
of
deep
sleep/light
sleep/awake all night, and calculate your sleep
duration; Sleep data currently only supports APP
viewing.
6. Heart rate, blood pressure, blood oxygen (healthy)
The heart rate, blood pressure and blood oxygen values can be
independently detected through the watch, and the values can be
synchronized to the APP terminal (please measure in a quiet state)
7. Notice (information)
After successfully pairing with the phone, you need to
turn
on
the
APP
reminder
function,
and
the
information received in the phone status bar will be
synchronized to the watch
8. Bluetooth music
After connecting the phone, you can play the music in
the phone through the watch, and you can play, pause,
and switch the previous song to the next.
9. Weather
The weather interface will display the current weather.
The weather information needs to be connected to the
APP to obtain data. If the connection is disconnected
for a long time, the weather information will not be
updated.
10.Settings
14.1 Click Settings to enter the setting interface. The setting interface
has options such as dial theme, language setting, power off, APP
downloading QR code, and factory restoration.
14.2 Shutdown: click to enter the shutdown selection interface, and
select“ ×” Exit the shutdown interface and select "√" to shut down
directly.
14.3 APP download QR code: click to enter the QR code, and use the
mobile phone scanning tool to scan the QR code to download.
14.4 Factory recovery: click to enter the factory recovery selection
interface, and select“ ×” Exit the factory recovery interface, select "√"
to directly restore the factory, and all data at the watch end will be
cleared.
14.5 About: display the hand device name, Bluetooth address and
version.
4： Common faults and troubleshooting
4.1 The watch cannot be turned on
4.1.1 The time of pressing the power-on key may be too short. Please
press and hold the power-on key for more than 3 seconds.
4.1.2 The battery may be too low. Please charge it in time.
4.1.3 The battery may enter the low battery protection, and the ordinary
charger will not respond to charging. Please try to use the charger with
an output power of 5V/1A to charge and activate.
4.2 The watch will shut down automatically
The battery may be too low. Please charge it.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection againstharmful interference in a residential installation. This equipment generates,
uses and can radiateradio frequency energy and, if not installed and used in accordance with
the instructions, maycause harmful interference to radio communications. However, there
is no guarantee thatinterference will not occur in a particular installation. If this
equipment does cause harmfulinterference to radio or television reception, which can be
determined by turning the equipmentoff and on, the user is encouraged to try to correct the
interference by one or more of thefollowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 0cm
between the radiator and your body.
">
