Planet POE-1200G Quick Installation Guide
Add to My manuals2 Pages
Planet POE-1200, a 12-port PoE injector hub, provides power and data over a single Ethernet cable to PoE-compatible devices like IP cameras, wireless access points, and VoIP phones. It eliminates the need for separate power supplies, simplifies installation, and increases flexibility in device placement. With a total power budget of 60 watts, the POE-1200 can power multiple devices simultaneously.
advertisement
Thank you for purchasing PLANET 12/24-Port Web Smart
PoE Injector Hub,
● POE-1200/POE-1200P2/POE-1200G – 12-Port PoE Injector
Hub
● POE-2400/POE-2400P4/POE-2400G – 24-Port PoE Injector
Hub
Unless model number is specified, the term “PoE Injector
Hub” in the following sections means the series of the products.
1. Package Content
Upon open the box of the PoE Injector Hub and carefully unpack it. The box should contain the following items:
● The PoE Injector Hub x 1
● This Quick Installation Guide x 1
● User’s Manual CD x 1
● Power Cord x 1
● Rubber Feet x 4
● Two rack-mounting brackets with attachment screws x 1
If any item is found missing or damaged, please contact your local reseller for replacement.
– 1 –
Please note that the PoE Injector Hub is configured through an Ethernet connection, make sure the manager
PC must be set on the same IP subnet address, for example, the default IP address of the PoE Injector Hub is
192.168.0.100 (the factory-default IP address), then the manager PC should be set at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
Entering default IP address then the Web login screen appears in Figure 1
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
Note
The following screen is based on POE-2400P4.
For other PoE Injector Hub, the web screen will the same as POE-2400P4.
2. Requirements
The following equipments are necessary for further management.
Network cables:
Use standard network (UTP) cables with RJ45 connectors.
Subscriber PC installed with Ethernet NIC (Network Card)
The operate system of subscriber PC that running Windows
98/ME, NT4.0, 2000/2003/XP/Vista, MAC OS9 or later,
Linux, UNIX or other platform compatible with TCP/IP protocols.
3. Start Web Management
You can manage the PoE Injector Hub remotely by having a remote host with Web browser, such as Microsoft Internet
Explorer, Netscape Navigator or Mozilla Firefox.
Web Smart PoE Injector Hub
PC/Workstation with
IE or Netscape Browser
RJ-45/UTP Cable
– 2 –
After entering the user name and password in login screen.
The Web main screen appears as Figure 2.
Note
Figure 2. Web Main Screen of POE-2400P4
For security reason, please change and memorize the new password after this first setup.
Figure 1. Web Login Screen of PoE Injector Hub
– 3 – – 4 –
4. While IP Address be changed or
forgotten admin password –
To reset the IP address to the default IP Address
“192.168.0.100” and the user name / password to factory default mode by press the hardware reset button about
10 seconds. After the device is rebooted, you can login the management Web interface within the same subnet of
192.168.0.xx and default user name / password.
5. Customer Support
Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve you issue. If you need more support information, please contact PLANET switch support team.
PLANET online FAQ: http://www.planet.com.tw/en/support/faq.php?type=2
Switch support team mail address: [email protected]
Copyright ©PLANET Technology Corp. 2009.
Contents subjects to revision without prior notice.
PLANET is a registered trademark of PLANET Technology
Corp. All other trademarks belong to their respective owners.
Hardware Reset button
– 5 – – 6 –
advertisement