Planet UPOE-1600G Quick Installation Guide
Add to My manuals2 Pages
Planet UPOE-800G is an 8-port Gigabit 60W Ultra PoE Managed Injector Hub that provides a simple and cost-effective way to deliver power and data to PoE-powered devices. With a total power budget of 60W, the UPOE-800G can power multiple devices such as IP cameras, VoIP phones, and wireless access points. The UPOE-800G also features a user-friendly web management interface that allows you to easily configure and monitor the device.
advertisement
![Planet UPOE-1600G Quick Installation Guide | Manualzz Planet UPOE-1600G Quick Installation Guide | Manualzz](http://s2.manualzz.com/store/data/064034179_1-6d951885946aef1189e3bb1ba6c54543-360x466.png)
1. Package Contents
Thank you for purchasing PLANET 8/16-Port Gigabit 60W
Ultra PoE Managed Injector Hub, UPOE-800G/UPOE-1600G.
“Ultra PoE Managed Injector Hub” mentioned in this quick installation guide refers to the UPOE-800G/UPOE-1600G.
Model Name
UPOE-800G
UPOE-1600G
10/100/1000T
Data + Power
Output Ports
8
16
10/100/1000T
Data
Input Ports
8
16
10/100/1000T
RJ45
Management Port
1
1
Open the box of the Ultra PoE Managed Injector Hub and carefully unpack it. The box should contain the following items:
The UPOE-800G or UPOE-1600G x 1
Quick Installation Guide x 1
Power Cord x 1
Rubber Feet x 4
19” Rack-mounting Brackets x 2
If any item is found missing or damaged, please contact your local reseller for replacement.
2. Requirements
Workstations running Windows XP/2003/Vista/7/8/2008/10,
MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Interface Card)
Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with
RJ45 connectors.
The above PC is installed with Web browser and JAVA runtime environment plug-in.
Note
It is recommended to use Internet Explore 8.0 or above to access the Ultra PoE Managed Injector
Hub. If the Web interface of the Ultra PoE
Managed Injector Hub is not accessible, please turn off the anti-virus software or firewall and then try it again.
– 1 – – 2 –
3. Starting Web Management
The following shows how to start up the Web Management of the Ultra PoE Managed Injector Hub. Note the Ultra PoE
Managed Injector Hub is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address .
For example, the default IP address of the Ultra PoE Managed
Injector Hub is 192.168.0.100
, then the manager PC should be set to 192.168.0.x
(where x is a number between
1 and 254, except 100) and the default subnet mask is
255.255.255.0.
PC/Workstation with
Web Browser
Gigabit 60W Ultra PoE Managed Injector Hub
192.168.0.x
1000
Reset
Management
10/100
1000
10/100
RJ45 Management Port
IP Address:
192.168.0.100
Figure 3-1: IP Management Diagram
Logging in to the Ultra PoE Managed Injector Hub
1. Use Internet Explorer 8.0 or above Web browser and enter IP address http://192.168.0.100
to access the Web interface.
2. When the following dialog box appears, please enter the default user name and password “admin” . The login screen in Figure 3-2 appears.
Default Username: admin
Default Password: admin
– 3 –
Figure 3-2: Web Login Screen
3. After entering the password, the main screen appears as
Figure 3-3 shows.
Note
The following web screen is based on the UPOE-
1600G. The display of the UPOE-800G is the same as that of the UPOE-1600G.
Figure 3-3: Web Main Screen of Ultra PoE Managed Injector Hub
The Ultra PoE Managed Injector Hub Menu on the left of the
Web page lets you access all the commands and statistics the
Ultra PoE Managed Injector Hub provides.
– 4 –
Figure 3-4: Ultra PoE Managed Injector Hub Menu
Now, you can use the Web management interface to continue the Ultra PoE Managed Injector Hub management. Please refer to the user’s manual for more.
4. Recovering Back to Default Configuration
IP Address has been changed or admin password has been forgotten –
To reset the IP address to the default IP Address
“192.168.0.100” or reset the login password to default value, press the reset button on the front panel for about 10 seconds . After the device is rebooted, you can login the Web interface management within the same subnet of 192.168.0.xx.
16-Port Gigabit 60W Ultra PoE Managed Injector Hub
UPOE-1600G
1000
SYS PWR
PoE Fail
FAN1 FAN2
Fail
Reset
Management
10/100
1000
10/100
LNK
LNK
ACT
ACT
PoE In-use
Ultra
60W
AT
30W
1 2 3 4 5 6 7
60W PoE In-use at/af PoE In-use
8 9 10 11 12 13 14 15 16
600W
450W
300W
150W
PoE Power Usage (W)
Figure 4-1: Ultra PoE Managed Injector Hub Reset Button
– 5 –
5. Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team.
PLANET online FAQ: http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address: [email protected]
UPOE-800G User’s Manual: http://www.planet.com.tw/en/support/download.
php?type1=2&model=48838&type=3
UPOE-1600G User’s Manual: http://www.planet.com.tw/en/support/download.
php?type1=2&model=48839&type=3
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
– 6 –
advertisement