60A
Model
Rackmount
Switching
Power Supplies
SEC-60BRM
60 Amps
Design Features
- Voltage/Ampere meter
- Module status LEDs, fault indicator LEDs and fault alarm are standard features on all models
- Highly regulated output voltage
- Short circuit protection and overload current
- 25 pin D-sub connector for remote monitoring system
2 YEAR LIMITED WARRANTY
MODEL NO.
NUMBER OF MODULES
INPUT VOLTAGE RANGE
INPUT CURRENT
NOMINAL OUTPUT VOLTAGE
NO LOAD OUTPUT VOLTAGE
FULL LOAD OUTPUT VOLTAGE
OUTPUT REGULATION
CONTINUOUS OUTPUT CURRENT
SURGE OUTPUT CURRENT
OUTPUT CURRENT LIMIT
MAXIMUM BATTERY CHARGING CURRENT
OUTPUT RIPPLE (PEAK TO PEAK)
OUTPUT NOISE (PEAK TO PEAK)
COOLING
PROTECTIONS
OPERATING TEMPERATURE
POWER CORD
POWER CORD PLUG
MODULE FUSE
UNIT CIRCUIT BREAKER
DIMENSIONS (19” Rack Mount, 2U height), MM (L x
W x
H)
DIMENSIONS (19” Rack Mount, 2U height), INCHES (L x
W x
H)
WEIGHT, KG
WEIGHT, LB
NOTE: Specifications are subject to change without notice
SEC-60BRM
3
105 to 125 VAC, 50 / 60 Hz
12 A
13.8 VDC
14 VDC
13.55 VDC
1%
60 A
69 A
72 A
8 A
150 mV
0.9 V
Forced air, 2 fans
Short circuit, current limit, fan failure (LED and buzzer), input surge suppression
0 - 40° C
12 AWG / 3 conductor
125 V, 20 A, NEMA 5-20P
250 V, 4 A
125 / 250 V, 25 A
483 x 404 x 91.4
19 x 15.9 x 3.6
10
22
12001-SEC-60BRM-0715
To view a full selection of Samlex products visit our website at www.samlexamerica.com
or contact us: 1-800-561-5885 or [email protected]
