The Desk You Deserve
www.studiodesk.net
ASSEMBLY MANUAL
HARMONY Series
Video Assembly manual is also available.
Search for Harmony Assembly Video manual on the YouTube
or scan code.
!
NOTE: In order to avoid injury or damages,
please do not try to assemble your desk alone.
Our furniture is massive and heavy and requires
at least two people to carry out assembly.
Please assemble on soft surface to avoid
scratches to the lacquer.
The Desk You Deserve
Thank you for making StudioDesk your desk of choice!
Before beginning assembly of your desk, let’s get familiar with the parts you have received in your package.
Please match the corresponding numbers on this page with the drawings.
Parts
1. Legs 2. Desk surface 3. Top shelf 4. Strengthening boards 5. Monitor shelf 7.Pull out 8. Rack dividers
1
6
5
1
5
4
2
3
Hardware
6
M6 x 12 Screw
Silver 96 pcs
TOOLS needed
7
Imbus wrench
8
Wooden Dowels
9
26 pcs
Confirmat
Screws 7x50
6pcs
Phillips Screwdriver
10
14
M6 x 16
Black 16 pcs
11 Metal brackets
Cable inlay
8 pc WH or BL
15 Shelf Bracket
12 Cage nuts
16 pc
18 pc
2 pcs
13
16
Rack rails 2U
8 pc
Optional
Cable management
17
3 x M6/12
3 x M6/18
Brackets for
Pull out 4 pcs
M6 x 16 pcs
www.studiodesk.net
1
Step One Insert the Dowels into the legs as shown on the illustration
2
Step Two
Place Main desk surface on the dowels
10
3
Step Three
Fix main desk board with Brackets and M6 scres
8
4
Step Four
Install strengthening boards as shown on the illustration. Fix it with brackets and M6 screws
a
b
5
Step Five
Add second strengthening board to the structure
6
Step Six
Fix it with Brackets and M6 Screws
7
Step Seven
Install Rack dividers to the structure
with dowels.
8
Step Eight
Carefully add top shelf to the structure as
shown on the illustration.
8
Step Eight
Fix Rack dividers with Confirmat screws from the
bottom.
9
Step Nine
Fix all the boards to the leg with Brackets
and M6 screws.
10
Step Ten
Insert dowels to the leg and close
the structure with the second leg.
11
Step Eleven
Fix boards to the leg with Brackets and
M6 Screws
12
Step Twelfe
If you purchased Cable management
tray, this step is optional.
Install cable management tray using
Washers and M6 screws.
13
Step Thirteen
Install Pull out brackets (17) and
fix pull out holders to it.
During this step you have to
Determine height of your keyboard
If your keyboard is higher then initial
Pull out holders, you are able to
adjust it in height at this step.
To this on both sides.
14
Step Fourteen
Turn desk in standing position
And install Rack rails (13)
using M6 screws.
Do that on both sides.
15
Step Fifteen
Insert Pull out to the rails
carefully evenly from
the both sides. Two people
are needed for this step.
We recommend watching video
Assembly manual on our Youtube
Channel.
16
Step Sixteen
Install shelf brackets (15) to the monitor
Shelf with M6 screws.
17
Step Seventeen
Screw M6 screws to the
desired height (one out of two)
and install the Monitor shelf.
Install cable inlays (14) to all holes
on the desk. There is total of
8 of them.
CONGRATULATIONS YOUR NEW DESK IS READY!
">
