Type C

Line Array Speaker System

VP-1061/1121

SR-C8L/SR-C8LWP

VP-1241/1361

SR-C8S/SR-C8SWP SR-C15B/SR-C15BWP

DESCRIPTION

TOA Type C speakers employ original TOA phase-wave front control technology to ensure a clear, uniform sound distribution field, for high-clarity acoustics and long-range sound carrying capacity. These module-type, 2-way line array speakers incorporate a 20cm (8") low frequency woofer and two 2.5cm (1") drivers, both Neodymium. Six models of Type C Series speakers are available: one with a

15 ° vertical sound dispersion angle, making it ideal for shorter distance applications, another with a 5° vertical dispersion angle, intended for longer-range sound dispersion applications, and a 38cm (15") subwoofer model. Each of these models is also available in a splash-proof (IPX4) variation. By combining the long-range and short-range models, a customized line array system can be created for a specific application.

With optional support brackets, these line array speakers may be used as permanent installations, and may be stacked or suspended by using a rigging frame.

FEATURES

Uniform & Interference-free High-frequency Sound Field

• “Sync-Drive”– TOA proprietary “Sync-Drive” wave guide technology provides a uniform, high frequency sound field with excellent sound clarity and minimal interference.

• High-fidelity sound – Phase wave-front control technology ensures a high-frequency sound range that is attenuation-free and high fidelity.

Focused Sound Wave Delivery

• Focus on the targeted listening area – Maximally precise sound directivity is designed into the speakers, particularly for vertical dispersion, more accurately focusing the audio on the intended reception area.

• Adjustable sound coverage – By connecting a number of speakers and combining speakers with different dispersion angles, most operating applications can best meet user needs.

• Clear sound – Type C speakers are resistant to feedback and enjoy reflection-free operation.

Application Versatility

• Single or bi-amp mode – by changing the position of an internal connector, Type C series speakers can be used in single or bi-amp mode.

• Splash-proof speaker models – SR-C8LWP/SR-C8SWP/

SR-C15BWP are available to widen the range of potential applications.

• Optional brackets – More flexible installation options are made possible thanks to a selection of available mounting brackets.

• Focused coverage – Overlap angles between individual speakers can be set from 0 to 5 degrees, for more flexible speaker directivity control.

Ease of Maintenance

• Both the low frequency driver and the high frequency driver can be quickly replaced from the rear of the speaker enclosure for ease of service.

TOA Corporation SR-C Series 1/6

OPTIONAL BRACKETS

SR-CL8

Cluster Bracket

SR-RF8/SR-RF8WP

Rigging Frame

SR-SB8

Rigging Support Bracket

SR-TP8

Tilt Joint Bracket

SPECIFICATIONS

Enclosure

Power Handling Capacity

Rated Impedance

Sensitivity

Frequency Response

Crossover Frequency

Directivity Angle

Speaker Component

Input Connector

Connected Cable

Operating Temperature

Dust/Water Protection

Finish Enclosure:

Front grille:

Dimensions

Weight

Accessory

Options

SR -C8L SR -C8S SR -C8LWP

Bass-reflex type

Continuous program: 360 W (single-amp mode)

Low frequency: 360 W, high frequency: 180 W (bi-amp mode)

16 Ω (single-amp mode)

Low frequency: 16 Ω, high frequency: 16 Ω (bi-amp mode)

98 dB (1 W , 1 m) (single-amp mode)

Low: 95 dB (1W, 1m), High: 110 dB (1W, 1m) (bi-amp mode)

65 – 20,000 Hz (when equalized at recommended parameters)

SR-C8SWP

Horizontal: 110

Vertical: 5 °

°

Low frequency: 20 cm (8") cone type

High frequency: Wave-front control horn

110 ° (horizontal) × 5° (vertical)

+ compression drivers × 2

Horizontal: 110 °

Vertical: 15 °

1,600 Hz (when equalized at recommended parameters)

Horizontal: 110 °

Vertical: 5 °

Low frequency: 20 cm (8") cone type

High frequency: Wave-front control horn

110 ° (horizontal) × 15° (vertical)

+ compression drivers × 2

M5 screw terminal, distance between barriers: 12.2 mm (0.48") and

Neutrik NL4MP × 2

Low frequency: 20 cm (8") cone type

High frequency: Wave-front control horn

110 ° (horizontal) × 5° (vertical)

+ compression drivers × 2

—

—

—

—

Horizontal: 110

Vertical: 15 °

°

Low frequency: 20 cm (8") cone type

High frequency: Wave-front control horn

110 ° (horizontal)15° (vertical)

+ compression drivers × 2

Direct cable withdrawal from internal speaker: ø8.6 mm (ø0.34") conductor cross section: 1.25 mm

2

(0.05"), 4-core cable, 3 m (9.84 ft)

-10 °C to +50°C (14°F to 122°F)

IPX4

Plywood, black, urethane paint

Punched steel plate, black, paint

526.6(W) × 293(H) × 296(D)mm

(20.73" × 11.54" × 11.65")

17 kg (37.48 lb)

526.6(W)

(20.73"

× 293(H) × 294(D)mm

× 11.54" × 11.57")

16 kg (35,27 lb)

Plywood, black, urethane coating

Punched stainless steel, black, paint

526.6(W) × 293(H) × 296(D)mm

(20.73" × 11.54" × 11.65")

17 kg (37.48 lb)

M8 connection bolt × 4

526.6(W)

(20.73"

× 293(H) × 294(D)mm

× 11.54" × 11.57")

16 kg (35,27 lb)

Cluster bracket: SR-CL8, Rigging frame: SR-RF8,

Tilt joint bracket: SR-TP8, Digital processor: DP-0206

Rigging frame: SR-RF8WP, Digital processor: DP-0206

Enclosure

Power Handling Capacity

Rated Impedance

Sensitivity

Frequency Response

Crossover Frequency

Speaker Component

Input Conncector

Connected Cable

Operating Temperature

Dust/Water Protection

Finish Enclosure:

Front grille:

Dimensions

Weight

Accessory

Options

SR -C15B SR -C15BWP

Bass-reflex type

Continuous program: 450 W

8 Ω

93 dB (1 W , 1 m)

40 – 400 Hz (when equalized at recommended parameters)

125 Hz (when equalized at recommended parameters)

M5 screw terminal, distance between barriers: 12.2 mm (0.48") and

Neutrik NL4MP x 2

38 cm (15") cone type

—

—

—

Direct cable withdrawal from internal speaker: ø8.6 mm (ø0.34") conductor cross section: 1.25 mm

2

(0.05"), 4-core cable, 3 m (9.84 ft)

-10 °C to +50°C (14°F to 122°F)

IPX4 —

Plywood, black, urethane paint

Punched steel plate, black, paint

526.6(W) × 594.8(H) × 550(D)mm (20.73" × 23.42" × 21.65")

41 kg (90.39 lb)

M8 connection bolt × 4

Plywood, black, urethane coating

Punched stainless steel plate, black, paint

Rigging frame: SR-RF8, Digital processor: DP-0206 Rigging frame: SR-RF8WP, Digital processor: DP-0206

TOA Corporation SR-C Series 2/6

200

100

50

CHARACTERISTIC DIAGRAMS (SR-C8L/SR-C8LWP)

Polar Response

30 °

10

0 °

0

-10

60 °

-20

-30

-40

330 °

300 ° 60 °

30 °

10

0 °

0

-10

-20

-30

-40

330 °

300 °

270 ° 270 °

90 ° 90 °

120 °

60 °

150 °

30 °

-40

-30

-20

-10

0

10

180 °

10

0 °

0

-10

-20

-30

-40

210 °

500Hz

400Hz

315Hz

330 °

240 °

300 °

120 °

60 °

150 °

30 °

-10

-20

-30

-40

-40

-30

-20

-10

0

10

180 °

10

0 °

0

210 °

1000Hz

800Hz

630Hz

330 °

240 °

300 °

270 ° 270 °

90 ° 90 °

120 °

60 °

150 °

30 °

0

-10

-20

-30

-40

-30

-20

-10

0

10

180 °

10

0 °

-40

210 °

2000Hz

1600Hz

1250Hz

330 °

240 °

300 °

120 °

60 °

150 °

30 °

-40

-30

0

-10

-20

-30

-20

-10

0

10

180 °

10

0 °

-40

210 °

4000Hz

3150Hz

2500Hz

330 °

240 °

300 °

Vertical

270 ° 270 °

90 ° 90 °

120 °

150 °

180 °

240 °

210 °

8000Hz

6300Hz

5000Hz

120 °

150 °

-40

-30

-20

-10

0

10

180 °

240 °

210 °

16000Hz

12500Hz

10000Hz

Horizontal

90 °

90 °

90 °

60 °

120 °

60 °

120 °

60 °

120 °

30 °

150 °

30 °

150 °

30 °

150 °

0

-10

-20

-40

-30

-20

-10

0

10

180 °

10

0 °

-30

-40

-40

-30

-20

-10

0

10

180 °

-40

-30

-20

0

-10

-20

-30

-40

-10

0

10

180 °

10

0 °

-20

-30

-40

10

0 °

0

-10

330 °

240 °

210 °

500Hz

400Hz

315Hz

330 °

300 °

240 °

210 °

2000Hz

1600Hz

1250Hz

330 °

300 °

240 °

210 °

8000Hz

6300Hz

5000Hz

300 °

270 °

90 °

270 °

90 °

270 °

90 °

60 °

120 °

60

120 °

60

°

°

120 °

30 °

150 °

30

150 °

30

°

°

150 °

-40

-30

-20

-10

0

10

180 °

10

0 °

0

-10

-20

-30

-40

10

0 °

0

-10

-20

-30

-40

-40

0

-10

-20

-30

-20

-10

0

10

180 °

10

0 °

-30

-40

-40

-30

-20

-10

0

10

180 °

330 °

300 °

270 °

240 °

210 °

1000Hz

800Hz

630Hz

330 °

300 °

270 °

240 °

210 °

4000Hz

3150Hz

2500Hz

330 °

300 °

270 °

240 °

210 °

16000Hz

12500Hz

10000Hz

Frequency Response

[dB]

110

100

90

80

70

60

50

20 50 100 500 1k

Frequency — SPL

Beamwidth vs. Frequency

[deg]

5k 10k

Total

Low

Hight

20k

[Hz]

APPEARANCE AND DIMENSIONAL DIAGRAM

SR-C8L

SR-C8LWP

Rear View

Left Side View unit: mm

526.6 (20.73")

470 (18.5") 296 (11.65")

Front View Right Side View

Screw terminal 4P

Wiring Diagram

2–

1+

2+

1–

NL4MP

1+

2–

2+

1–

NL4MP

(+)

(–) LOW

(+)

(–)

HIGH

Rear View

10

5

526.6 (20.73")

470 (18.5") 296 (11.65")

1

20 50 100 500 1k

Frequency — Beamwidth

5k 10k

Hor.

Ver.

20k

[Hz]

Left Side View Front View

Note:

1. It features the water-protection construction (IPX4), however it is recommended that it be installed under roofs, eaves, or other locations not directly exposed to rain or snow.

2. Do not install the SR-C8LWP at places where it is likely to be corroded such as bath room, indoor pools, or seaside.

3. Install the speaker with its air hole down. The air hole are provided at the bottom surface.

4. For outdoor permanent installation. the installation angle of the speaker as shown at the right must be between 0

° horizontal and 50° downward.

5. When permanently installing the speaker outdoors, inspect it periodically.

Right Side View unit: mm

0°

— 50

°

Mounting example

Green LOW(+)

Black LOW(–)

Red HIGH(+)

White HIGH(–)

TOA Corporation SR-C Series 3/6

200

100

50

CHARACTERISTIC DIAGRAMS (SR-C8S/SR-C8SWP)

Polar Response

30 °

10

0 °

0

-10

60 °

-20

-30

-40

90 °

120 °

60 °

150 °

30 °

-40

-30

-20

-10

0

10

180 °

10

0 °

0

-10

-20

-30

-40

330 °

210 °

500Hz

400Hz

315Hz

330 °

300 °

240 °

300 °

270 °

90 °

60 °

120 °

60 °

30 °

150 °

30 °

-10

-20

-30

-40

-40

-30

-20

-10

0

10

180 °

10

0 °

0

10

0 °

0

-10

-20

-30

-40

330 °

210 °

1000Hz

800Hz

630Hz

330 °

300 °

240 °

270 °

300 °

270 ° 270 °

90 ° 90 °

120 °

60 °

150 °

30 °

-40

0

-10

-20

-30

-30

-20

-10

0

10

180 °

10

0 °

-40

210 °

2000Hz

1600Hz

1250Hz

330 °

240 °

300 °

120 °

60 °

150 °

30 °

-40

-30

0

-10

-20

-30

-20

-10

0

10

180 °

10

0 °

-40

210 °

4000Hz

3150Hz

2500Hz

330 °

240 °

300 °

Vertical

270 ° 270 °

90 ° 90 °

120 °

150 °

180 °

240 °

210 °

8000Hz

6300Hz

5000Hz

120 °

150 °

-40

-30

-20

-10

0

10

180 °

240 °

210 °

16000Hz

12500Hz

10000Hz

Horizontal

90 °

90 °

90 °

60 °

120 °

60 °

120 °

60 °

120 °

30 °

150 °

30 °

150 °

30 °

150 °

-40

-30

-20

-10

0

10

180 °

10

0 °

0

-10

-20

-30

-40

10

0 °

0

-10

-20

-30

-40

0

-10

-20

-30

-40

-30

-20

-10

0

10

180 °

10

0 °

-40

-40

-30

-20

-10

0

10

180 °

330 °

210 °

500Hz

400Hz

315Hz

330 °

240 °

300 °

240 °

210 °

2000Hz

1600Hz

1250Hz

330 °

300 °

240 °

210 °

8000Hz

6300Hz

5000Hz

300 °

270 °

90 °

270 °

90 °

270 °

90 °

60 °

120 °

60

120 °

60

°

°

120 °

30 °

150 °

30

150 °

30

°

°

150 °

-10

-20

-30

-40

-40

-30

-20

-10

0

10

180 °

10

0 °

0

10

0 °

0

-10

-20

-30

-40

-40

0

-10

-20

-30

-20

-10

0

10

180 °

10

0 °

-30

-40

-40

-30

-20

-10

0

10

180 °

330 °

300 °

240 °

210 °

1000Hz

800Hz

630Hz

330 °

300 °

270 °

240 °

210 °

4000Hz

3150Hz

2500Hz

330 °

300 °

240 °

210 °

16000Hz

12500Hz

10000Hz

270 °

270 °

Frequency Response

[dB]

110

100

70

60

90

80

50

20 50 100 500 1k

Frequency — SPL

Beamwidth vs. Frequency

[deg]

5k 10k

Total

Low

Hight

20k

[Hz]

APPEARANCE AND DIMENSIONAL DIAGRAM

SR-C8S

Rear View

Left Side View unit: mm

SR-C8SWP

526.6 (20.73")

470 (18.5") 294 (11.57")

Front View Right Side View

Screw terminal 4P

Wiring Diagram

2–

1+

2+

1–

NL4MP

1+

2–

2+

1–

NL4MP

(+)

(–) LOW

(+)

(–)

HIGH

Rear View

10

5

526.6 (20.73")

470 (18.5") 294 (11.57")

1

20 50 100 500 1k

Frequency — Beamwidth

5k 10k

Hor.

Ver.

20k

[Hz]

Left Side View Front View

Note:

1. It features the water-protection construction (IPX4), however it is recommended that it be installed under roofs, eaves, or other locations not directly exposed to rain or snow.

2. Do not install the SR-C8SWP at places where it is likely to be corroded such as bath room, indoor pools, or seaside.

3. Install the speaker with its air hole down. The air hole are provided at the bottom surface.

4. For outdoor permanent installation. the installation angle of the speaker as shown at the right must be between 0

° horizontal and 50° downward.

5. When permanently installing the speaker outdoors, inspect it periodically.

Right Side View unit: mm

0°

—

50

°

Green LOW(+)

Black LOW(–)

Red HIGH(+)

White HIGH(–)

Mounting example

TOA Corporation SR-C Series 4/6

CHARACTERISTIC DIAGRAMS (SR-C15B/SR-C15BWP)

Polar Response

Frequency Response

[dB]

110

60 °

30 °

10

0 °

0

-10

-20

-30

-40

330 °

300 ° 60 °

30 °

10

0 °

0

-10

-20

-30

-40

330 °

300 °

100

90

80

270 ° 270 °

90 °

90 °

70

120 °

60 °

150 °

30 °

-40

-30

-20

-10

0

10

180 °

10

0 °

0

-10

-20

-30

-40

210 °

250Hz

200Hz

160Hz

330 °

240 °

300 °

270 °

120 °

150 °

-40

-30

-20

-10

0

10

180 °

0 °

240 °

60

50

20

200

50 100 500 1k

Frequency — SPL

90 °

210 °

500Hz

400Hz

315Hz

Beamwidth vs. Frequency

[deg]

120 °

150 °

-40

-30

-20

-10

0

10

180 °

240 °

210 °

1000Hz

800Hz

630Hz

100

50

10

5

5k 10k 20k

[Hz]

1

20 50 100 500 1k

Frequency — Beamwidth

APPEARANCE AND DIMENSIONAL DIAGRAM

SR-C15B SR-C15BWP

Rear View

Rear View

526.6 (20.73")

470 (18.5") 550 (21.65")

526.6 (20.73")

470 (18.5")

5k 10k

Hor.

20k

[Hz]

550 (21.65") unit: mm

Left Side View Front View Right Side View

Screw terminal 4P

(+)

(–)

2–

2+

1+

1–

2–

2+

1+

1–

NL4MP NL4MP

Wiring Diagram

Left Side View Front View Right Side View unit: mm

Note:

1. It features the water-protection construction (IPX4), however it is recommended that it be installed under roofs, eaves, or other locations not directly exposed to rain or snow.

2. Do not install the SR-15BWP at places where it is likely to be corroded such as bath room, indoor pools, or seaside.

3. Install the speaker with its air hole down. The air hole are provided at the bottom surface.

4. For outdoor permanent installation. the installation angle of the speaker as shown at the right must be between 0

° horizontal and 50° downward.

5. When permanently installing the speaker outdoors, inspect it periodically.

Green Input (+)

Black Input (–)

Red NC

White NC

Mounting example

TOA Corporation SR-C Series 5/6

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

SR-C8L/SR-C8S

The speaker shall be a two-way component module designed for use in a modular line array system. The low-frequency section shall consist of one 8"

(20cm) Neodymium woofer. The high frequency section shall consist of two compression drivers, each having a 1" (25 mm) Neodymium driver. The high frequency waveguide shall consist of two throat sections feeding a single shared mouth, with each throat section incorporating 8 paths of equal length from the driver throat to the waveguide mouth to obtain effectively isophasic output for maximum efficiency of operation in a line array system. The speaker input connectors shall include screw terminal connections for LF and HF inputs and two

Neutrik NL4 type sockets, wired in parallel for pass-through to additional speakers.

The speaker shall meet the following performance criteria. Power handling in biamp mode: Low Frequency input: 360 W continuous program; High Frequency input: 180 W continuous program. Power handling in single-amp mode: 360 W continuous program. Frequency response (10 dB below rated pressure sensitivity, with recommended crossover and equalization): 65 Hz to 20 kHz. Sensitivity (1

W at 1 m) in bi-amp mode: Low Frequency: 95 dB; High Frequency: 110 dB.

Sensitivity (1 W at 1 m) in single-amp mode: 98 dB. Rated impedance in bi-amp mode: Low Frequency: 16 ohms nominal; High Frequency: 16 ohms nominal.

Rated impedance in single-amp mode: 16 ohms nominal.

The speaker's horizontal and vertical coverage shall be tailored for use in a line array consisting of multiple units from the same series arranged one above the other so that each pass-band section forms a vertical line. The horizontal coverage shall be 110 degrees nominal. The vertical coverage shall be SR-C8L: 5 degrees nominal; SR-C8S: 15 degree nominal. Extending the vertical coverage area shall be possible by stacking multiple units from the same series. The consistency of coverage shall not be degraded when multiple units are stacked.

The combined vertical coverage of multiple units, when stacked, shall be adjustable from that of a straight line array (coverage area defined by the height of the array) to a curved array, with the combined coverage angle adjustable in 1 degree increments.

The speaker enclosure shall be made of plywood and finished with black urethane paint. The speaker grille shall be made from a single punched steel plate and finished with black paint. The dimensions (W × H × D) shall be SR-C8L:

526.6

× 293 × 296 mm (20.73" × 11.54" × 11.65"); SR-C8S: 526.6 × 293 × 294 mm (20.73" × 11.54" × 11.57") and weight shall be SR-C8L: 17 kg (37.48 lb);

SR-C8S: 16 kg (35.27 lb). The speaker enclosure shall be equipped with M8 threaded steel plates for the secure attachment of optional accessory brackets.

The loudspeaker shall be TOA model SR-C8L/SR-C8S.

The cluster bracket shall be TOA model SR-CL8.

The rigging frame shall be TOA model SR-RF8.

The tilt joint bracket shall be TOA model SR-TP8.

SR-C8LWP/SR-C8SWP

The speaker shall be a two-way component module designed for use in a modular line array system. The low-frequency section shall consist of one 8"

(20cm) Neodymium woofer. The high frequency section shall consist of two compression drivers, each having a 1" (25 mm) Neodymium driver. The high frequency waveguide shall consist of two throat sections feeding a single shared mouth, with each throat section incorporating 8 paths of equal length from the driver throat to the waveguide mouth to obtain effectively isophasic output for maximum efficiency of operation in a line array system. The speaker shall include an integral input connection cable, 8.6 mm (0.34") outside diameter, 4-conductor,

3 m (9.84") long.

The speaker shall meet the following performance criteria. Power handling in biamp mode: Low Frequency input: 360 W continuous program; High Frequency input: 180 W continuous program. Power handling in single-amp mode: 360 W continuous program. Frequency response (10 dB below rated pressure sensitivity, with recommended crossover and equalization): 65 Hz to 20 kHz. Sensitivity (1

W at 1 m) in bi-amp mode: Low Frequency: 95 dB; High Frequency: 110 dB.

Sensitivity (1 W at 1 m) in single-amp mode: 98 dB. Rated impedance in bi-amp mode: Low Frequency: 16 ohms nominal; High Frequency: 16 ohms nominal.

Rated impedance in single-amp mode: 16 ohms nominal.

The speaker's horizontal and vertical coverage shall be tailored for use in a line array consisting of multiple units from the same series arranged one above the other so that each pass-band section forms a vertical line. The horizontal coverage shall be 110 degrees nominal. The vertical coverage shall be SR-

C8LWP: 5 degrees nominal; SR-C8SWP: 15 degree nominal. Extending the vertical coverage area shall be possible by stacking multiple units from the same series. The consistency of coverage shall not be degraded when multiple units are stacked. The combined vertical coverage of multiple units, when stacked, shall be adjustable from that of a straight line array (coverage area defined by the height of the array) to a curved array, with the combined coverage angle adjustable in 1 degree increments.

The speaker enclosure shall be made of plywood and finished with black urethane coating. The speaker shall comply with the IEC IPX4 standard for dust and water resistance and operate within a temperature range from -10

°C to

+50 °C (14°F to 122°F). The speaker grille shall be made from a single punched stainless steel plate and finished with black paint. The dimensions (W

× H × D) shall be SR-C8LWP: 526.6 × 293 × 296 mm (20.73" × 11.54" × 11.65"); SR-

C8SWP: 526.6

× 293 × 294 mm (20.73" × 11.54" × 11.57") and weight shall be

SR-C8LWP: 17 kg (37.48 lb); SR-C8SWP: 16 kg (35.27 lb). The speaker enclosure shall be equipped with M8 threaded steel plates for the secure attachment of optional accessory brackets.

The loudspeaker shall be TOA model SR-C8LWP/SR-C8SWP.

The rigging frame shall be TOA model SR-RF8WP.

SR-C15B

The speaker shall be sub-woofer system. The component shall consist one 15"

(38 cm) woofer. The speaker input connectors shall include screw terminal connections and two Neutrik NL4 type sockets.

The speaker shall meet the following performance criteria. Power handling: 450 W continuous program. Frequency response (10 dB below rated pressure sensitivity, with recommended crossover and equalization) 40 to 400 Hz. Sensitivity (1 W at

1 m): 93 dB. Impedance: 8 ohms nominal.

The speaker enclosure shall be made of plywood and finished with black urethane paint. The speaker grille shall be made from a single punched steel plate and finished with black paint. The dimensions (W

× H × D) shall be 526.6 ×

594.8 × 550 mm (20.73" × 23.42" × 21.65") and weight (including accessory brackets) shall be 41 kg (90.39 lb). The speaker enclosure shall be equipped with

M8 threaded steel plates for the secure attachment of optional accessory brackets. Available accessory brackets for suspension and stand mounting shall be made of steel.

The loudspeaker shall be TOA model SR-C15B.

The rigging frame shall be TOA model SR-RF8.

SR-C15BWP

The speaker shall be sub-woofer system. The component shall consist one 15"

(38 cm) woofer. The speaker shall include an integral input connection cable, 8.6 mm (0.34") outside diameter, 4-conductor, 3 m (9.84") long.

The speaker shall meet the following performance criteria. Power handling: 450 W continuous program. Frequency response (10 dB below rated pressure sensitivity, with recommended crossover and equalization) 40 to 400 Hz. Sensitivity (1 W at

1 m): 93 dB. Impedance: 8 ohms nominal.

The speaker enclosure shall be made of plywood and finished with black urethane coating. The speaker grille shall be made from a single punched stainless steel plate and finished with black paint. The speaker shall comply with the IEC IPX4 standard for dust and water resistance and operate within a temperature range from -10

°C to +50°C (14°F to 122°F). The dimensions (W × H

× D) shall be 526.6 × 594.8 × 550 mm (20.73" × 23.42" × 21.65") and weight

(including accessory brackets) shall be 41 kg (90.39 lb). The speaker enclosure shall be equipped with M8 threaded steel plates for the secure attachment of optional accessory brackets. Available accessory brackets for suspension and stand mounting shall be made of steel.

The loudspeaker shall be TOA model SR-C15BWP.

The rigging frame shall be TOA model SR-RF8WP.

TOA Corporation SR-C Series 6/6

TOA Corporation

www.toa.jp

Specifications are subject to change without notice.

(0908) 833-52-403-60 u