PLANET MC-1500R User's manual

1. Package Contents

Before start installing the Converter, verify the package contains the following parts:

● The Media Converter Chassis x 1

● User's Manual x 1

● Mounting Accessory (for 10/19” Chassis Shelf) x 1

● Rubber Feet x 4

● AC Power Cord x 1

If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them against to repack the product in case there is a need to return it to us for repair.

3. Media Converter Chassis

Front Panel

Figure 3-1 & 3-2 & 3-3 shows a front panel of MC-700 /

MC-1500 / MC-1500R / MC-1500R48.

Figure 3-1 MC-700 Front Panel

Figure 3-2 MC-1500 Front Panel

5. Media Converter Chassis

Rear Panel

Figure 5-1 & 5-2 & 5-3 shows a front panel of MC-700 /

MC-1500 / MC-1500R / MC-1500R48.

The rear panel of the MC-700 is with one fan, one ON/

OFF Switch and a power inlet that accept 100~240V AC,

50/60Hz power input.

Figure 5-1 MC-700 Rear Panel

The rear panel of the MC-1500 is with two fans, one ON/

OFF Switch and a power inlet that accept 100~240V AC,

50/60Hz power input.

6. Installing the Media Converter

Chassis

6.1 Installing Media Converter Chassis to

10/19-inch Wiring Closet Rack

» Install four screws through mounting ears into each side.

» Locate Converter Chassis at 10/19-inch mounting rails and screw up the front brackets.

» Set Main power switch at “OFF” position before connecting the power cord.

- 1 -

2. Product Features

● High quality 10" / 19” Rack-Mountable Chassis installation

● Supports up to seven (7) / fifteen (15) hot-swappable media converters

● One fan brings the air-flow for system cooling, and LED indicators for system and fan status (MC-700)

● Two fan brings the air-flow for system cooling, and LED indicators for system and fan status (MC-1500 / 1500R /

1500R48)

● The power slot at rear panel for redundant power support with options of 100~240V AC or -48V DC supplies

(MC-1500R / 1500R48)

● Bay power isolation, ensure each bay is electrically isolated from each other

● Support multiple converters with 10/100/1000Mbps, copper, Fiber, single/multi-mode ST/SC/SFP connectors

● Reduce the effort of converter maintenance and management, diagnose the status at one time

● Cost-effective, easy install

- 2 -

Figure 3-3 MC-1500R / 1500R48 Front Panel

- 3 -

4. LED Indicators

MC-700

Printing

LED

Status

ON

PWR

FAN

OFF

ON

OFF

Description

The chassis is powered.

The chassis is not powered or power failure, if the AC outlet is with

100~240V AC voltage. Please consult your local dealer if power failure.

The fan is functional ok.

The fan is not powered or it is malfunction. If the fan LED remains off while power is on. Please consult your local dealer to replace the FAN.

MC-1500 Series

Printing

LED

Status

ON

PWR

OFF

FAN A /

FAN B

ON

OFF

Description

The chassis is powered.

The chassis is not powered or power failure.

The fan is functional O.K.

The fan is not powered or it is malfunction. If the fan LED remains off while power is on. Please consult your local dealer to replace the FAN.

- 4 -

Figure 5-2 MC-1500 Rear Panel

- 5 -

The rear panel of the MC-1500R / 1500R48.

Note

Figure 5-3 MC-1500R / 1500R48 Rear Panel

1. The MC-1500R shipped with one 100~240V

AC power supply module (MC-15RPS130).

2. The MC-1500R48 shipped with one DC -48V power supply module (MC-15RPS48).

Power

Notice

1. The device is a power-required device, it means, it will not work till it is powered.

If your networks should active all the time, please consider use a proper UPS

(Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network downtime.

2. In some area, installing a surge suppression device may also help to protect your chassis from being damaged by unregulated surge or current to the converter or the power adapter.

Figure 6-1 Installing Media Chassis in Wiring Closet Rails

- 7 -

6.2 Installing Converters to the Media Converter

Chassis

» Turn off the Converter Chassis power.

» Verify the Media Converter is right for this Chassis and locate +5VDC power jack on converter back, carefully slide in and plug to match 10”/19” Chassis slot +5V

DC receptacle. Push up the picket fence to lock the converters.

Note

The slide-in Media Converters and Converter

Chassis should be supplied only from PLANET, both Media Converters and Chassis are built to match each other at dimensions, DC power jack, and DC receptacle and power safety.

» Ensure that there is no activity in the network.

» Connect the media cable for network connection.

» Turn on the chassis power, the Power LED, and both FAN

LED indicators will light up.

- 6 - 8 -

6.3 Converter Check Point

Fiber

Port

TP

Port

Attach the fiber cable. The Tx,

Rx fiber cable must be paired at both ends.

Attach UTP

Cat. 3 or 5 cable to TP port.

2.5mm

DC Receptacle 2.5mm

+5V for each slot

DC receptacle is 2.5mm wide that conforms to and matches the Media Converter 2.5mm DC jack's central pole. Do not install any improper unit, model of the

Media Converter.

Note

For safety reason, it is recommended storing the AC adapter of the converter in a known secured place. For more about converter, refer to the user guide of the converter.

MC-1500 Converter Chassis Specifications

Dimension

Converter Slots

Power Input

Power

Consumption

440 mm x 103 mm x 180 mm

(W x H x D), 2.4U height

15 slots

100~240V AC, 50/60Hz

70 Watts maximum / 238BTU

Power Output

Per Slot

+5V DC

DC Plug Per Slot 2.5 mm DC receptacle

LED Indication 3; Power 1, FAN A, FAN B

FAN

Temperature /

Humidity

Emission

2

Operating Environment

0~50 Degree C; Humidity: 5~90% non-condensing

Storage Environment

-40~70 Degree C; Humidity: 5~90% non-condensing

FCC Part 15 Class A, CE

- 9 -

7. Product Specifications

MC-700 Converter Chassis Specifications

Dimension

Converter Slots

Power Input

Power

Consumption

217 mm x 88.5 mm x 140 mm

(W x H x D), 2U height

7 slots

100~240V AC, 50/60Hz

40 Watts maximum / 136BTU

Power Output

Per Slot

+5V DC

DC Plug Per Slot 2.5 mm DC receptacle

LED Indication 2; Power, FAN

FAN

Temperature /

Humidity

Emission

1

Operating Environment

0~50 Degree C; Humidity: 5~90% non-condensing

Storage Environment

-40~70 Degree C; Humidity: 5~90% non-condensing

FCC Part 15 Class A, CE

- 10 -

- 11 -

MC-1500R / MC-1500R48 Converter Chassis

Specifications

Model MC-1500R MC-1500R48

Dimension

440 mm x 103 mm x 180 mm

(W x H x D), 2.4U height

Converter Slots 15 slots

Power Input

100~240V AC,

3.3A, 50-60Hz

DC -48V, 2A,

Range: -40V ~ -60V

Power

Consumption

10.7 Watts / 36BTU

(1 x power supply, not include converters)

5.3 Watts / 18BTU

(1 x power supply, not include converters)

88.3 Watts / 301BTU

(Full loading)

80 Watts / 272BTU

(Full loading)

Power Output

Per Slot

DC Plug Per

Slot

Each slot 5V 1A

2.5 mm DC receptacle

LED Indication 4; Power 1, Power 2, FAN A, FAN B

FAN

Temperature /

Humidity

Emission

2

Operating Environment

0~50 Degree C; Humidity: 5~90% non-condensing

Storage Environment

-40~70 Degree C; Humidity: 5~90% non-condensing

FCC Part 15 Class A, CE

- 12 -

8. Customer Support

Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve you issue. If you need more support information, please contact PLANET Media Converter support team.

PLANET online FAQ : http://www.planet.com.tw/en/support/faq.php?type=3

Media Converter support team mail address : [email protected]

Copyright © PLANET Technology Corp. 2012.

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.

- 13 -