AU7001 Digital Audio Input Module
Doc. #1507203 08/18 Rev C
Catalog Number(s) Country of Origin: Made in China •
Installation Instructions
INSTALLATION INSTRUCTIONS
Please read these instructions completely
before you begin.
AU7001
The Digital Audio Input Module (AU7001) provides access to streaming music services and music files stored
on computes and storage devices connected to the homes network. Up to four (4) AU7001’s can be used in a
Digital Audio system. The AU7001 takes is powered by the AU7000 Digital Audio Distribution Module. The
AU7001 is setup by the Legrand Digital Audio app, available for iOS and Android devices, and controlled by
this app and through the Digital Audio Amplified Keypads.
1
PHYSICAL INSTALLATION
Physical Installation: Install the AU7001 in the OnQ Enclosure. Connect a Cat 5
jumper from the “DIST MODULE SOURCEs (1-4) jack to one of the Source inputs of
the AU7000 Digital Audio Distribution Module. If jumpers are custom made
terminate Cat5 wires via TIA/EIA 568A. Connect Ethernet from the home network to
the LAN Jack. Ensure that all cables are connected to their respective locations.
Ensure that Keypads and sources located through the home are properly terminated
and correctly connected. Connect the a 12VCD power supply such as the PW7760
to the AU7000 and apply power.
This device is verified to comply with Part 15 Class B of the FCC Rules.
2a
CONFIGURATION / BINDING
If you haven’t already, download the Legrand Digital Audio app from the iTunes
or Google Play store. Ensure that the smart device you are using is connected to
the same network as the AU7000. Start the application and follow the on-screen
instructions for setup. Check all connections and power up the Digital Audio
System
2b
Once the system powers up and the app makes a connection, an unconfigured AU7001 will be recognized and will appear as an Unconfigured Source Device. Select Settings (snap shot 1) then select
“Bind Digital Source (snap shot 2)
2c
Next, press the bind button on the AU7001. The AU7000 Digital Audio
Distribution Module will search for the AU7001 DIM. Once it is found,
the source will be bound to the system (snap shot 2). Select “Done” to
move to the next step.
Doc. #1507203 08/18 Rev B
800.223.4162
1.877.BY.LEGRAND
www.legrand.us
www.legrand.ca
© Copyright 2014 Legrand All Rights Reserved.
2
2d
2e
3a
After selecting “Done” you will be returned to the
Sources screen. This example shows a single
source bound to the system. If you would like to
name this source, select the “source 1” name
(snap 1), edit (snap 2) and select “Save” (snap
3). Do this step for every AU7001 you would like
to add.
After the AU7001 has been named, pressing the “Done” button (snap
1) will return you to the home page of the Legrand Digital Audio
System where the bound source is shown and available to use.
Adding music sources – TuneIn Radio
To add streaming music services go to
Settings/Music Services (snap 1). Tune-In Radio
will be seen as a default source. If you have an
account, select TuneIn (snap 2), enter your
credentials (snap 3) and press “Done”
Doc. #1507203 08/18 Rev B
800.223.4162
1.877.BY.LEGRAND
www.legrand.us
www.legrand.ca
© Copyright 2014 Legrand All Rights Reserved.
3
3b
3c
Adding music sources – Pandora, Rhapsody, SiriusXM and
others
To enable other music services go to settings/music
services (snap 1). Once there you will be presented
with the music service choices (snap 2). Select the
music service you would like to setup and go to step
3C for the next step.
This step shows the setup pages the for some services,
Pandora (free/paid), Rhapsody (paid service) and
Sirius/XM (paid service) are shown. Enter your account
credentials or setup/try a service.
Volume should be set to @ 75% for optimized sound quality.
Tapping the volume button on the slider toggles Mute on and off.
3d
Setting up networked music libraries
If you have music stored on a NAS drive or
computer in the home you need to setup the
system to see those files. Go to settings/Music
Library then add Share to setup LAN based music
file servers.
Doc. #1507203 08/18 Rev B
800.223.4162
1.877.BY.LEGRAND
www.legrand.us
www.legrand.ca
© Copyright 2014 Legrand All Rights Reserved.
4
4a
4b
Software updates
The AU7001 checks every 24 hours for software updates. If a software update
needs to be performed, you will be prompted with a message (snap 1). Select
continue and the app will change to a software change log (snap 2). Select
install now and skip to step 4b.
This is a final checks and balances page to
ensure a firmware update should be performed.
Select “Install” (snap 1) and the app will switch
to the “Updating System…” screen (snap 2).
When the install has completed the app will
switch to the next page which shows the
installation is complete (snap 3).
LED Status
Not Lit
No Power
Solid Green
Not Bound
Solid White
Normal Operation
Flashing Red
No Network
Solid Red
Hard Failure
Solid Blue
Mute On
Doc. #1507203 08/18 Rev C
800.223.4162
1.877.BY.LEGRAND
www.legrand.us
www.legrand.ca
© Copyright 2014 Legrand All Rights Reserved.
5
">
