Doc. #1507203 08/14 Rev A
Catalog Number(s)
Country of Origin: Made in China •
AU7001 Digital Audio Input Module
Installation Instructions
INSTALLATION INSTRUCTIONS
Please read these instructions completely before you begin.
AU7001
The Digital Audio Input Module (AU7001) provides access to streaming music services and music files stored on computes and storage devices connected to the homes network. Up to four (4) AU7001’s can be used in a
Digital Audio system. The AU7001 takes is powered by the AU7000 Digital Audio Distribution Module. The
AU7001 is setup by the Legrand Digital Audio app, available for iOS and Android devices, and controlled by this app and through the Digital Audio Amplified Keypads.
1 PHYSICAL INSTALLATION
This device is verified to comply with Part 15 Class B of the FCC Rules.
Physical Installation: Install the AU7001 in the OnQ Enclosure. Connect a Cat 5 jumper from the “DIST MODULE SOURCEs (1-4) jack to one of the Source inputs of the AU7000 Digital Audio Distribution Module. If jumpers are custom made terminate Cat5 wires via TIA/EIA 568A. Connect Ethernet from the home network to the LAN Jack. Ensure that all cables are connected to their respective locations.
Ensure that Keypads and sources located through the home are properly terminated and correctly connected. Connect the a 12VCD power supply such as the PW7760 to the AU7000 and apply power.
CONFIGURATION / BINDING 2a
If you haven’t already, download the Legrand Digital Audio app from the iTunes or Google Play store. Ensure that the smart device you are using is connected to the same network as the AU7000. Start the application and follow the on-screen instructions for setup. Check all connections and power up the Digital Audio
System
2b
2c
Once the system powers up and the app makes a connection, an unconfigured AU7001 will be recognized and will appear as an Unconfigured Source Device. Select Settings (snap shot 1) then select
“Bind Digital Source (snap shot 2)
Next, press the bind button on the AU7001. The AU7000 Digital Audio
Distribution Module will search for the AU7001 DIM. Once it is found, the source will be bound to the system (snap shot 2). Select “Done” to move to the next step.
Doc. #1507203 08/14 Rev A
© Copyright 2014 Legrand All Rights Reserved.
2
860.233.6251
1.877.BY.LEGRAND www.legrand.us www.legrand.ca
2d
After selecting “Done” you will be returned to the
Sources screen. This example shows a single source bound to the system. If you would like to name this source, select the “source 1” name
(snap 1), edit (snap 2) and select “Save” (snap
3). Do this step for every AU7001 you would like to add.
2e After the AU7001 has been named, pressing the “Done” button (snap
1) will return you to the home page of the Legrand Digital Audio
System where the bound source is shown and available to use.
Adding music sources – TuneIn Radio 3a
To add streaming music services go to
Settings/Music Services (snap 1). Tune-In Radio will be seen as a default source. If you have an account, select TuneIn (snap 2), enter your credentials (snap 3) and press “Done”
Doc. #1507203 08/14 Rev A
© Copyright 2014 Legrand All Rights Reserved.
3
860.233.6251
1.877.BY.LEGRAND www.legrand.us www.legrand.ca
3b Adding music sources – Pandora, Rhapsody, SiriusXM and others
To enable other music services go to settings/music services (snap 1). Once there you will be presented with the music service choices (snap 2). Select the music service you would like to setup and go to step
3C for the next step.
3c
This step shows the setup pages the for some services,
Pandora (free/paid), Rhapsody (paid service) and
Sirius/XM (paid service) are shown. Enter your account credentials or setup/try a service.
Setting up networked music libraries 3d
If you have music stored on a NAS drive or computer in the home you need to setup the system to see those files. Go to settings/Music
Library then add Share to setup LAN based music file servers.
Doc. #1507203 08/14 Rev A
© Copyright 2014 Legrand All Rights Reserved.
4
Volume should be set to @ 75% for optimized sound quality.
Tapping the volume button on the slider toggles Mute on and off.
860.233.6251
1.877.BY.LEGRAND www.legrand.us www.legrand.ca
Software updates 4a
The AU7001 checks every 24 hours for software updates. If a software update needs to be performed, you will be prompted with a message (snap 1). Select continue and the app will change to a software change log (snap 2). Select install now and skip to step 4b.
4b
This is a final checks and balances page to ensure a firmware update should be performed.
Select “Install” (snap 1) and the app will switch to the “Updating System…” screen (snap 2).
When the install has completed the app will switch to the next page which shows the installation is complete (snap 3).
Doc. #1507203 08/14 Rev A
© Copyright 2014 Legrand All Rights Reserved.
LED Status
Not Lit No Power
Solid Green Not Bound
Solid White Normal Operation
Flashing Red No Network
Solid Red Hard Failure
Solid Blue Mute On
5
860.233.6251
1.877.BY.LEGRAND www.legrand.us www.legrand.ca
