TITLE:
WWW.LEGRAND.US
INSTRUCTION SHEET,
PDU MOUNT BRACKETS,
RACKS
MEASURE THE DISTANCE BETWEEN THE MOUNTING
BUTTONS "X" ON THE BACKSIDE OF THE PDU.
THE DISTANCE MUST BE DIVISIBLE BY 1.75" (OR 1RU) IN
ORDER FOR THE BRACKETS TO WORK ON THE RACKS.
IF NOT, ADJUST THE BUTTONS ACCORDINGLY.
FLAT, SINGLE
SINGLE FOR RACK RAIL
SINGLE DEEP
DOUBLE WIDE
X
SINGLE DEEP
SINGLE WIDE
INSTRUCTION SHEET NUMBER:
71602037
DOUBLE DEEP
DOUBLE WIDE
DOUBLE DEEP
SINGLE WIDE
FLAT, DOUBLE WIDE
REV:
00
ECN:
BRACKET
FITMENT CHART
MAXIMUM NUMBER OF
PDUS TO BE INSTALLED
MM20PDUMBRC1W-X
1
MM20PDUMBFT1W-X
1
MM20PDUMB1D2W-X
MM20PDUMBFT2W-X
2
2
MM20PDUMB2D1W-X
2
MM20PDUMB2D2W-X
2
MM20PDUMB1D1W-X
1
SHEET:
1 OF 3
DWN. BY:
CV
INSTALL A 3" OR INSTALL A 1/2
6" CABLE RING
SPOOL
x
x
x
x
x
x
DATE:
02/28/2024
x
x
(PDU'S SOLD SEPARATELY)
x
CHK. BY:
JM
DATE:
2/28/2024
APP. BY:
CMV
DATE:
10/24/23
TITLE:
WWW.LEGRAND.US
INSTRUCTION SHEET,
PDU MOUNT BRACKETS,
RACKS
INSTALLATION NOTES:
•
IN THE 4-HOLE PATTERN ON THE RACK RAILS, ALIGN THE BRACKETS WITH THE 2 SMALLER HOLES.
•
MAKE SURE THE CENTER KEYHOLES ON THE BRACKETS ARE THE SAME DISTANCE "X" APART AS THE BUTTONS ON THE PDU.
•
INSTALL THE BRACKET WITH EITHER 4 OR 8 MOUNTING SCREWS PROVIDED.
•
ALL OF THE PDU BRACKETS WITH THE ½ SHEARS/DEBOSS FEATURES ALLOW FOR THE INSTALLATION OF 1/4-TURN 3" OR 6" CABLE RINGS OR SPOOLS.
4-HOLE PATTERN
BUTTONS ON REAR OF
PDU'S HUNG IN BUTTON
HOLES ON BRACKETS.
MOUNTING SCREWS
THE TOP 1/2 CIRCLE IS FACING UP
CABLE RING MOUNTING,
MOUNT ON THE EMBOSSED FACE
(SOLD SEPARATELY)
X
SPOOL MOUNTING,
THE BOTTOM 1/2 CIRCLE IS FACING
DOWN,
MOUNT ON THE EMBOSSED FACE
(SOLD SEPARATELY)
SINGLE
FLAT FOR RACK RAIL
DOUBLE
DOUBLE WIDE
SINGLE DEEP FOR RACK RAIL
SINGLE WIDE
MM20 RACK MOUNTING
INSTRUCTION SHEET NUMBER:
71602037
REV:
00
ECN:
SHEET:
2 OF 3
DWN. BY:
CV
DATE:
02/28/2024
CHK. BY:
JM
DATE:
2/28/2024
APP. BY:
CMV
DATE:
10/24/23
TITLE:
WWW.LEGRAND.US
INSTRUCTION SHEET,
PDU MOUNT BRACKETS,
RACKS
THE V-GROOVE OF THE UPPER
AND LOWER BRACKETS MUST
POINT IN THE SAME DIRECTION
HANG OVER THE EDGE OF THE
RACK RAILS BY 1/4" SO NOT TO
COVER THE RU MARKINGS
(THE SECOND INSTALLATION
METHOD)
FLUSH WITH THE EDGE OF THE
RACK RAIL WHICH COVERS
THE RU MARKINGS
(THE FIRST INSTALLATION
METHOD)
SINGLE WIDE
DOUBLE WIDE
SINGLE FOR RACK RAIL
DOUBLE DEEP FOR RACK RAIL
MM20 RACK MOUNTING
INSTRUCTION SHEET NUMBER:
71602037
REV:
00
ECN:
SHEET:
3 OF 3
DWN. BY:
CV
DATE:
02/28/2024
CHK. BY:
JM
DATE:
2/28/2024
APP. BY:
CMV
DATE:
10/24/23
">
