TITLE:
WWW.LEGRAND.US
(8) SPLIT LOCK
WASHERS
Q-SERIES OVERHEAD RACK SYSTEM
ASSEMBLY INSTRUCTIONS
(8) PAN HEAD
MOUNTING
SCREWS
(2) CABLOFIL CABLE
TRAY MOUNTING
BRACKETS
MAIN BRACKET WELDMENT
2 POST OVERHEAD RACK
SYSTEM (2RU - 8RU SIZES)
NOTES
1.
2.
INSTRUCTION SHEET #:
MAXIMUM MOUNTED PATCH PANEL LOAD SHALL NOT EXCEED 50 LBS.
SEE SHEET 2 FOR MOUNTING OPTIONS TO CABLE TRAYS.
OR-71601927
REV:
00
ECN #:
SHEET:
1 of 2
DWN BY:
JS
DATE:
2/10/2017
CHK BY:
JQ
DATE:
2/10/2017
APP. BY:
CV
DATE:
2/15/2017
TITLE:
Q-SERIES OVERHEAD RACK SYSTEM
ASSEMBLY INSTRUCTIONS
WWW.LEGRAND.US
STEP 1
DETERMINE IF THE MOUNTING EQUIPMENT WILL MOUNT TO
EITHER A CABLE TRAY OR CEILING MOUNT
(THREADED RODS OR HANGERS NOT SUPPLIED).
CABLE TRAY BRACKET
STEP 2
DETERMINE THE MOUNTING POSITION OF THE UNIT. THE MOUNTING OPTIONS ARE: REAR TOP,
REAR MIDDLE, REAR BOTTOM, UNDERNEATH PARALLEL, UNDERNEATH PERPENDICULAR.
CABLE TRAY
TOP MOUNTING
UNDERNEATH PERPENDICULAR
UNDERNEATH PARALLEL
INSTRUCTION SHEET #:
OR-71601927
REV:
00
ECN #:
CABLE TRAY
BOTTOM MOUNTING
CABLE TRAY
MIDDLE MOUNTING
SHEET:
2 of 3
DWN BY:
JPS
DATE:
CHK BY:
JQ
DATE:
2/10/2017
APP. BY:
CV
DATE:
2/15/2017
TITLE:
Q-SERIES OVERHEAD RACK SYSTEM
ASSEMBLY INSTRUCTIONS
WWW.LEGRAND.US
STEP 3
ONCE THE MOUNTING LOCATION IS DETERMINED, MOUNT 2 CABLE TRAY BRACKETS USING (8)
SPLIT LOCK WASHERS AND (8) PAN HEAD SCREWS.
CABLE TRAY BRACKETS
STEP 4
HANG ASSEMBLY ONTO CABLE TRAY WHERE REQUIRED.
INSTALLATION IS NOW COMPLETE.
INSTRUCTION SHEET #:
OR-71601927
REV:
00
ECN #:
SHEET:
3 of 3
DWN BY:
JPS
DATE:
CHK BY:
JQ
DATE:
2/10/2017
APP. BY:
CV
DATE:
2/15/2017
">
