Operating manual
T3300LE
487 14 23 11.00
GB
Tørretumbler
Contents:
Diagram / Instruction signs and operating panels
Operating panel
Communal laundries / Housing block laundries AHL
Dryers with payment for drying time
Error codes
Dryer maintenance
Heat pump unit maintenance
The manufacturer reserves the right to modify design, material
and specifications without notice.
Safety instructions
This machine is only intended for drying water-washed
garments.
Clothes that have been cleaned with chemicals/flammable
liquids, must NOT be dried in the machine.
Remove clothes from the dryer as soon as they are dry. This
prevents them from becoming creased, and reduces the risk of
spontaneous ignition.
The machine must not be used for drying foam rubber or foamlike materials.
The machine must not be used for drying floor mops*.
The machine must not be used by minors.
The machine must not be hosed down with water.
Mechanical, electrical and gas installation and service must
only be carried out by qualified personnel.
Report machine malfunctions to qualified service personnel as
soon as possible. This is important for your own safety and for
the safety of others.
* Applies only to floor mops containing polypropylene.
Textiles as silk and wool must not be overdried
to avoid the risk of creasing.
487 14 23 11 - 3300LE GB
3
4
Operating manual
Diagram
Door
Operating panel
Filter drawer
Card reader
Instruction sign
487 19 24 05.01
Heat pump
unit (HP)
Adjustable feet
Instruction signs / operating panels
Communal laundries / Housing block laundries - AHL (Apartment House Laundry)
Dryers with manual operation
P
P
487 19 24 04 01
Coin-operated dryers
487 19 24 05 01
487 14 23 11 - 3300LE GB
5
Operating manual
Operating panel
F
K
H
A
P
G
F
C
C
D
D
B
G
E E
487 19 24 04.01
A.
Symbols for selected temperature.
B.
Temperature selection button.
C.
Program selection button (P-button). Not active on pay machines.
D.
Time button: Setting of drying time. Not active on pay machines.
E.
Start/stop button.
F.
Heat.
G.
Not active.
H.
Program status: d = drying, c = cool-down, - - = anti-crease*
487 14 23 11 - 3300LE GB
6
Operating manual
Programmes - AHL*
Programmes P 01 - P 03
Program
Process
Textiles
P 01
Extra dry
Denim
P 02
Ready to put away
100% cotton / poly cotton mixture / terry
P 03
Ironing dry 15% moisture
100% cotton / poly cotton mixture / terry
Full loads are recommended in order to achieve the best result.
Temperatures
High
Non-iron / normal wash
Cotton and mixed fabrics
Medium
Non-iron / normal wash
Cotton and mixed fabrics
Low
Fine wash / mild wash
Delicate fabrics
No heat
Airing bedspreads, duvets and bedclothes
*AHL
Apartment House Laundry
487 14 23 11 - 3300LE GB
7
Operating manual
Dryers with manual operation - AHL
Open door and
filter door and
clean the filters.
Fill garments
into the drum and
close the door.
Select programme
using the P-button
P01 Extra dry
P02 Ready to put away
P03 Ironing dry (15% moisture)
or
P
use the time button
to set the drying
time.
Select temperature:
High
Medium
Low
No heat
Start:
Press the start/stop
button.
The last few
minutes of the
drying time are the
cool-down period.
The tumble dryer stops:
Automatically on P programmes
when the clothes are dry.
P
On time programmes when the
selected time has expired.
487 14 23 11 - 3300LE GB
Stop:
Press the start/stop button or
open the door.
Restart:
Close the door and
press the start/stop button.
To prevent
creasing:
Empty the tumble
dryer as soon as
the program has
ended.
If the tumble dryer is not emptied
immediately after the drying time has
ended, an anti-crease programme is
automatically engaged.
This means that the drum rotates at
short intervals.
8
Operating manual
Programmes, dryers with payment for drying time
Temperatures
High
Non-iron / normal wash Cotton and mixed fabrics
Medium
Non-iron / normal wash Cotton and mixed fabrics
Low
Fine wash / mild wash
No heat
Delicate textiles
Airing bedspreads, duvets and bedclothes
Full loads are recommended in order to achieve the best result.
487 14 23 11 - 3300LE GB
9
Operating manual
Dryers with payment for drying time
Open door and
filter door and
clean the filters.
Fill garments
into the drum and
close the door.
Select temperature:
High / medium:
Non-iron / normal wash
Low:
Fine wash/mild wash
No heat:
Airing bedspreads, duvets ect.
High
Medium
Low
No heat
Payment:
Pay with card
487 14 23 11 - 3300LE GB
Start:
Press the start/stop
button.
The tumble dryer
stops automatically when the
selected drying time
has ended.
Stop:
Press the start/stop
button or open the
door.
Restart:
Close the door
and press
the start/stop
button.
To prevent
creasing:
Empty the tumble
dryer as soon as the
program has ended.
If the tumble dryer is not emptied
immediately after the drying time has
ended, an anti-crease programme is
automatically engaged.
This means that the drum rotates at
short intervals.
The last few
minutes of the
drying time are the
cool-down period.
10
Operating manual
Error codes
The tumble dryer has automatic error indication.
Error indication is displayed as a flashing code.
Please refer to the manual Selecta Control for an explanation of error codes.
The inspector of the laundry must be contacted should an error be displayed.
487 14 23 11 - 3300LE GB
11
Operating manual
Maintenance
1
The following should be carried out at regular
intervals, depending on machine usage.
Daily
• Check that the drum stops when either the
loading door or the lint drawer is opened.
If the dryer operates with the loading door or the
filter drawer open, the machine must be placed
out of order until repairs are made.
NOTE! Contact a qualified service personnel to
disconnect power from the dryer.
• Check that the machine does not start until the
start button is pressed.
• Check that the loading door and filter drawer
gaskets are clean and in good condition (clean
with a damp cloth).
1
• Remove filter drawer A in order to clean it.
Clean with a small brush or vacuum cleaner.
Check that the lint filter in the drawer is in good
condition.
Weekly
1
Check that the secondary lint screen B behind
the lint drawer has not become blocked with lint
or dust. Use a vacuum cleaner and clean the
secondary lint screen.
Quarterly
Wipe off/clean drum and lifters with citric acid
(Acidum citricum). If soap/softener residue
remains, it is recommended also to use a coarse
sponge.
The cleaning should be carried out at regular
intervals, however, at least once every quarter.
487 14 23 11 - 3300LE GB
B
A
12
Operating manual
Heat pump unit maintenance
The following should be carried out at regular
intervals, depending on machine usage.
1
Maintain the heat pump unit as described in
order to obtain an optimal drying process.
Daily
• Check that the lint filter is clean and unbroken.
In order to clean the filter leave it in the dryer
and clean it with a soft brush.
Weekly
• Remove the outer lint filter A.
Clean the compartment and the inner filter in
1
front of the evaporator with a small brush or a
vacuum cleaner. Do not remove the inner filter.
The maintenance should be carried out more
frequently when drying textiles which release a
lot of lint.
• Check that filter door gaskets are clean.
(use a moist cloth to clean).
A
487 14 23 11 - 3300LE GB
">
