Paladin 172413 pro Owner Manual
Show HTML Add to My manuals1 Pages
Paladin 172413 pro is a time switch with an astro function, allowing for automatic control of lighting based on sunrise and sunset times. It also has two channels, enabling independent control of two separate lighting circuits.
With the astro function, you can program the time switch to turn on and off your lights at specific times based on the position of the sun. This can be useful for automating outdoor lighting, such as garden or security lights, to ensure they are only on when needed.
The time switch also has a permanent by date programming step, allowing you to set a specific date for the lights to turn on and off. This can be useful for special occasions, such as holidays or events, when you want to create a specific lighting schedule.
advertisement
GB
Instruction Manual -
Time switch with Astro function
[SC 28.X3 pro / 172 4X3 pro]
Connection diagram 1. Safety instructions
!
The installation and assembly of electrical equipment must be only carried out only by a skilled Person! Otherwise fire danger or danger of an electric shock exists!
!
Connect the supply voltage/frequency as stated on the product label!
!
Warranty void if housing opened by unauthorised person!
!
The electronic circuit is protected against a wide range of external influences. Incorrect operating may occur if external influences exceed certain limits!
2. Initial operation
The time switch is delivered in sleep-mode, the display is switched off.
Press -button for 1 second.
The current date and time is already programmed and European daylight savings time is activated.
Select the desired language by pressing -buttons and confirm it by pressing .
(Remark: By pressing you move one step backwards from the current position)
If required, date, time and daylight savings time mode can be adjusted also by pressing -buttons and a subsequent confirmation with .
When using the astro function it is obligatory to enter the geographical position of the place of the installation of the device. Choose with -buttons between „location“ (pre-defined cities) and „position“ (longitude and latitude). Confirm your choice again with . (The easiest way is choosing a pre-defined city within the
„locations“-menu.)
Enter the nearest city or the geographical coordinates with -buttons and confirm with
3. Menu overview
Menu Program Menu Adjustment
4. Symbol legend
Power plug symbol (flashing): While the power supply is disconnected, the display shows a power plug symbol (flashing). The time switch is then operated in the reserve mode. Press OKbutton for 1 sec. to “wake up” the time switch.
/ Channel is switched ON / Channel is switched OFF
For the current date the “holiday program” / “permanent by date” is activated
Standard programming step
Current state is based on a manual over-ride. The state will be cancelled with the next programming step.
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Element within sub-menu “program delete”
Astro function: Current state is based on a sunrise or sunset taking into account an optionally adjusted Offset.
The time switch is locked; to unlock the device the PIN has to be entered.
Menu Options
New program
See point 7 (New program)
Date-Time
Adjustment of date and time
Extra switching time
See point 8
Program query
Program modify
To query the programming steps and remaining memory locations
Within Program modify each single switching time can be modified.
Summertime
Astro
Adjustment of the daylight saving time mode
Adjust your geographical position with predefined choice of regions/countries and cities or with longitude, latitude and time zone.
Counter
PIN-Code
Displays the hour counter and pulse counter for each channel and the time switch itself.
The time switch can be locked with a 4-digit PIN-Code. The code can be adjusted, activated and deactivated. If you have forgotten the Code please call customer service.
Program delete
Deletion of switching time(s). The program for all channels, single channels and single programming steps within on channel can be deleted.
Language
Choice of languages
Program copy
Extra switching time
Reset-Function
Copy from one channel to another.
Factory
Defaults
Reset to the state of delivery. Date, time and switching program will be lost!
5. Key function
Automatic-Mode
To access the Enter-mode (program, adjustments, options) from the automatic-mode
To switch the channel ON or OFF until the next programming step occurs.
Menu / Enter-Mode
To revert to the beginning of the current (sub-) menu
To adjust the flashing digit. To scroll through a choice
6. Channel ON OFF / Permanent P
Channel ON OFF
By pushing -buttons ( -buttons) a manual switch of the channels take place. The resulting switching status is marked with the hand-symbol and remains until the next programming step occurs. (temporary over-ride)
Permanent switching status P
To activate the time switch when operated without power supply.
To confirm the selection or the entered data.
By pressing the corresponding channel button for more than 3 sec. the channel is permanently switched ON or OFF.
The status remains until the next manual switching occurs (> 3 sec.). (permanent over-ride)
7. Program permanent / Extra switching time / Reset
Permanent
One permanent by date programming step (holiday function) for each channel is possible. During the desired period (The function is valid for the whole days) the channel can be switched off (permanent off) or on (permanent on).
The choice permanent will not be offered anymore within the menu new program when already in use. The switching time can be modified and deleted within Program modify and Program delete respectively. (See Point 8)
You can program further “extra” switching times e.g. if you like to use a channel of the time switch for a non-“Astro lighting-application”. You have to activate the “extra switching times” within the menu Options. The “extra switching times” works like a standard weekly program (ON / OFF). After activating the “extra switching time” it will be offered within the programming menu “new program”. (See Point 8)
Press all front keys for 2 seconds. The time switch is reset. The values for date and time will be deleted and have to be re-entered. The switching program has not been deleted!
8. New program
www.hugo-mueller.de BA SC28X3pro-1724X3pro MP; DE, GB, FR, IT - 22347 - 2009.03-06
advertisement