Datalogic PowerScan M8300 barcode readers Quick Reference Guide

PowerScan™ M8300 Readers

Industrial Handheld Laser Bar Code Reader with Datalogic’s STAR Cordless System™

Quick Reference Guide

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A and the E.U. All other brand and product names referred to herein may be trademarks of their respective owners.

Patents

This product is covered by one or more of the following patents.

Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK 0602013.5M001; HK

0602013.5M002; JP 1305693; KR 30-0460940; US D570,843 S; USD588,596 S.

US Pat. 5,992,740; 6,305,606 B1; 6,517,003; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2;

5,367,151; 5,449,893; 5,545,889; 6,098,877; 6,220,514 B1; 6,412,698 B2; 6,607,132 B1;

6,817,529 B2; 6,834,805 B2; 7,948,214 B2.

European Pat. 789,315 B1; 895,175 B1; 1,128,314 B1; 1,128,315 B1; 1,396,811 B1;

1,413,971 B1; 1,816,585 B1; 1,942,442 B1.

Additional patents pending.

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are available on the

Datalogic website at www.datalogic.com.

I

Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Collegarsi a : www.datalogic.com

F

Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet. Cliquez sur : www.datalogic.com

D

Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation von diesem Produkt. Adresse : www.datalogic.com

E

En Internet están disponibles las versiones actualizadas de los drivers y documentación de este producto. Dirección Internet : www.datalogic.com

Quick Reference Guide 1

Using PowerScan™ M8300

USING POWERSCAN

™

M8300

The PowerScan

™

M8300 series readers can be used with either an BC-80X0 cradle or

Stargate™ radio base station to build a Cordless Reading System for the collection, decoding and transmission of barcoded data.

PowerScan

™

M8300 laser readers automatically scan barcodes at a distance. Simply aim and pull the trigger.

SCAN LINE POSITION

Code scanning is performed along the scan line emitted from the reading window.

This line must cross the entire code. The best reading angles are indicated in the figure below:

READING ANGLE

Successful scanning is obtained by tilting the reader with respect to the barcode to avoid direct reflections that impair the reading performance, see the figure below.

2 PowerScan™ M8300

Using PowerScan™ M8300

AIMING SYSTEM

PowerScan

™

M8300 provides an aiming system. If enabled, a partial trigger press produces a red spot, which should be aimed over the code center to get the best reading performance, see figure (1) above. By completely pressing the trigger the scan line appears to start the code scanning (2).

After setting up the reader, you can enable or disable the aiming system by reading the codes below:

Disable Aiming System (Default)

Ì$+Bj0$-"Î

Enable Aiming System

Ì$+Bj1$-'Î

Quick Reference Guide 3

Charging the Batteries

CHARGING THE BATTERIES

Once the BC-80X0/C-8000 is powered, you can charge the reader's batteries.

Place the PowerScan

™

M8300 into the BC-80X0 cradle or the C-8000 battery charger.

The "Reader" LED on the cradle/battery charger turns red.

The battery is completely charged when the "Reader" LED on the cradle/battery charger turns green.

To change the batteries, unscrew the retaining screw and extract the battery pack from the reader handle. Then, insert the new battery pack into the reader handle and tighten the screw. (See the following figures).

1

2

4

Figure 1 – Changing the Batteries

Before using the Battery, read “Battery Safety” in the following section.

Datalogic recommends annual replacement of rechargeable battery packs to ensure maximum performance.

PowerScan™ M8300

Charging the Batteries

BATTERY SAFETY

To install, charge and/or perform any other action on the battery, follow the instructions in this manual.

WARNING

Do not discharge the battery using any device except for the scanner.

When the battery is used in devices other than the designated product, it may damage the battery or reduce its life expectancy. If the device causes an abnormal current to flow, it may cause the battery to become hot, explode or ignite and cause serious injury.

Lithium-ion battery packs may get hot, explode or ignite and cause serious injury if exposed to abusive conditions. Be sure to follow the safety warnings listed on this and the following page.

• Do not place the battery pack in fire or heat.

• Do not connect the positive terminal and negative terminal of the battery pack to each other with any metal object (such as wire).

• Do not carry or store the battery pack together with metal objects.

• Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts or shocks.

• Do not solder directly onto the battery pack.

• Do not expose the battery pack to liquids, or allow the battery to get wet.

• Do not apply voltages to the battery pack contacts.

WARNING

In the event the battery pack leaks and the fluid gets into your eye, do not rub the eye. Rinse well with water and immediately seek medical care. If left untreated, the battery fluid could cause damage to the eye.

CAUTION

Always charge the battery at 32° – 104°F (0° - 40°C) temperature range.

Use only the authorized power supplies, battery pack, chargers, and docks supplied by your Datalogic reseller. The use of any other power supplies can damage the device and void your warranty.

Do not disassemble or modify the battery. The battery contains safety and protection devices, which, if damaged, may cause the battery to generate heat, explode or ignite.

CAUTION

Do not place the battery in or near fire, on stoves or other high temperature locations.

Do not place the battery in direct sunlight, or use or store the battery inside cars in hot weather. Doing so may cause the battery to generate heat, explode or ignite. Using the battery in this manner may also result in a loss of performance and a shortened life expectancy.

Quick Reference Guide 5

Charging the Batteries

CAUTION

Do not place the battery in microwave ovens, high-pressure containers or on induction cookware.

Immediately discontinue use of the battery if, while using, charging or storing the battery, the battery emits an unusual smell, feels hot, changes color or shape, or appears abnormal in any other way.

Do not replace the battery pack when the device is turned on.

Do not remove or damage the battery pack’s label.

Do not use the battery pack if it is damaged in any part.

Battery pack usage by children should be supervised.

As with other battery types, Lithium-Ion (LI) batteries will lose capacity over time.

Capacity deterioration is noticeable after one year of service whether the battery is in use or not. It is difficult to precisely predict the finite life of a LI battery, but cell manufacturers rate them at 500 charge cycles. In other words, the batteries should be expected to take 500 full discharge/charge cycles before needing replacement. This number is higher if partial discharging/recharging is adhered to rather than full/deep discharging,

The typical manufacturer advertised useful life of LI batteries is one-three years, depending on usage and number of charges, etc., after which they should be removed from service, especially in mission critical applications. Do not continue to use a battery that is showing excessive loss of capacity, it should be properly recycled

/ disposed of and replaced. For most applications, batteries should be replaced after one year of service to maintain customer satisfaction and minimize safety concerns.

Collect and recycle waste batteries separately from the device to comply with

European Directive 2006/66/EC, 2002/95/EC, 2002/96/EC and subsequent modifications, US and China regulatory and other laws and regulations about the environment.

6 PowerScan™ M8300

Charging the Batteries

SETUP

PowerScan

™

M8300/BC-80X0 Point-to Point Configuration

1.

Connect an BC-80X0 cradle to the Host. For installation and connection information see the BC-80X0 Quick Reference Manual.

2.

Charge the PowerScan

™

M8300 battery using an BC-80X0 or the

C-8000 charger as described in this Quick Reference manual. A full charge takes 4 hours if using an external power supply; while it takes up to 10 hours if supplying power through the USB port.

3.

Configure the reader as described in this Quick Reference -

PowerScan

™

M8300/BC-80X0 Point-to-Point Setup.

4.

Configure the BC-80X0 cradle. See BC-80X0 Configuration in the

BC-80X0 Quick Reference.

or

PowerScan

™

M8300/BC-80X0 Stand Alone Configuration

1.

Connect an BC-80X0 cradle to the Host. For installation and connection information see the BC-80X0 Quick Reference Manual.

2.

Charge the PowerScan

™

M8300 battery using an BC-80X0 or the

C-8000 charger as described in this Quick Reference manual. A full charge takes 4 hours if using an external power supply; while it takes up to 10 hours if supplying power through the USB port.

3.

Configure the reader as described in this Quick Reference -

PowerScan

™

M8300/BC-80X0 Stand Alone Setup.

4.

Configure the BC-80X0 cradle. See BC-80X0 Configuration in the

BC-80X0 Quick Reference.

or

PowerScan

™

M8300/STAR-System™ Configuration

1.

Charge the PowerScan

™

M8300 battery using an BC-8000 or the

C-8000 charger as described in this Quick Reference manual. A full charge takes 4 hours if using an external power supply; while it takes up to 10 hours if supplying power through the USB port.

2.

Configure the reader as described in this Quick Reference

PowerScan

™

M8300/STAR-System™ Setup.

Quick Reference Guide 7

PowerScan™ M8300 Configuration

POWERSCAN

™

M8300 CONFIGURATION

POWERSCAN

™

M8300/BC-80X0 POINT-TO-POINT SETUP

A rapid configuration procedure has been devised for point-to-point applications where a single reader is associated exclusively with its own BC-80X0 base station and where it is not necessary to set the Date and Time parameters.

A special pre-printed bind-address label provided in the BC-80X0 base station package can be used to bind the PowerScan

™

M8300 reader to the base station with the address coded on the label. The address is also written numerically on the label to be easily recognized. Valid addresses are in the range from 0000 to 1999. Make sure

that all cradles used in the same area have different addresses.

To rapidly configure your point-to-point application:

1.

Apply the bind-address label onto the BC-80X0 base station as indicated in the BC-80X0 Quick Reference Manual.

2.

3.

When the BC-80X0 cradle is connected and powered, read the

Bind-Address label to pair the PowerScan

™

M8300 to the BC-80X0 cradle.

The green LED on the PowerScan

™

M8300 will blink: the reader is ready to be positioned onto the cradle.

Firmly position the reader onto the cradle within 10 seconds, a beep will be emitted, signaling that the BC-80X0 cradle has been paired to the

PowerScan

™

M8300, and the green LED on the reader will go off.

Green LED

If it ever becomes necessary to change the reader, just read the bind-address label applied to the cradle and position the new reader onto the cradle.

Do not use multiple readers with this configuration method.

4.

Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick Reference”.

END of procedure. YOUR READER IS NOW READY TO READ CODES.

8 PowerScan™ M8300

PowerScan™ M8300 Configuration

POWERSCAN

™

M8300/BC-80X0 STAND ALONE SETUP

When the BC-80X0 cradle is connected and powered, configure the PowerScan

™

M8300 by reading the following codes in the given sequence and follow the instructions.

Note:

for the numeric code selection of steps 3, 4, and 5 use the table at the end of this Quick Reference.

1.

Restore PowerScan

™

M8300 Default

Ì$+$*oÎ

2.

3.

Enter Configuration

Ì$+;Î

Set Date

ÌIA%Î

+ six digits for Day, Month and Year (DDMMYY).

4.

Set Time

ÌIB'Î

+ four digits for Hours and Minutes (HHMM).

5.

6.

Set Radio Address

ÌRA0RFHÎ

+

four digits for the PowerScan

™

M8300 Address

(from 0000 to 1999).

All readers used in the same area must have different addresses.

Exit and Save Configuration

Ì$-?Î

Quick Reference Guide 9

PowerScan™ M8300 Configuration

7.

Read the Bind code to pair the PowerScan

™

M8300 to the BC-80X0 cradle.

The reader is dedicated to the cradle. Any previously bound reader will be excluded.

To connect several readers to the same cradle see the following section "Using

Multiple Readers with Same Cradle".

Bind

Ì$+RN0$-IÎ

The green LED on the PowerScan

™

M8300 will blink: the reader is ready to be positioned onto the cradle.

8.

Firmly position the reader onto the cradle within 10 seconds, a beep will be emitted, signaling that the BC-80X0 cradle has been paired to the PowerScan

™

M8300, and the green LED on the reader will go off.

Green LED

9.

Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick Reference”.

END of procedure. YOUR READER IS NOW READY TO READ CODES.

10 PowerScan™ M8300

PowerScan™ M8300 Configuration

USING MULTIPLE READERS WITH SAME CRADLE

If you want to use several readers associated with the same cradle, you must first Bind the cradle with one of the readers (see previously described configuration procedure).

Successive readers can be associated with the same cradle by following the configuration procedure substituting the Bind command with Join.

7.

Join

Ì$+RN1$-NÎ

The green LED on the PowerScan

™

M8300 will blink: the reader is ready to be positioned onto the cradle. Complete step 8.

END of procedure.

CAUTION

All readers associated with the same cradle must have different addresses.

POWERSCAN

™

M8300/STAR-MODEM™ STAND ALONE SETUP

To configure a PowerScan™ M8300 reader to communicate with STAR-Modem™ in

Stand Alone Mode, follow the "PowerScan™ M8300/BC-80X0 Stand Alone Setup" procedure substituting steps 6 and 7 with those below:

6.

STAR-Modem™ Address

ÌRSRÎ

Read the code above and the four-digit address of the STAR-Modem™.

7.

Exit and Save Configuration

Ì$-?Î

END of procedure. YOUR READER IS NOW READY TO READ CODES.

Quick Reference Guide 11

PowerScan™ M8300 Configuration

POWERSCAN

™

M8300/STAR-SYSTEM™ SETUP

The following procedure allows configuring a PowerScan

™

M8300 reader to communicate with various STAR-System™ devices such as Stargate™ RF base stations:

1.

Restore PowerScan

™

M8300 Default

Ì$+$*oÎ

2.

3.

Enter Configuration

Ì$+;Î

Set Date

ÌIA%Î

+ six digits for Day, Month and Year (DDMMYY).

4.

5.

Set Time

ÌIB'Î

+ four digits for Hours and Minutes (HHMM).

Set the connection according to the length of the codes to be read:

Code Length

240 Characters

ÌRA1aÎ

Code Length

240 Characters

(not for systems with BC-80X0 as Master)

ÌRA2dÎ

12 PowerScan™ M8300

PowerScan™ M8300 Configuration

6.

7.

8.

Set Radio Address

ÌRF8Î

+

four digits from the Numeric Table for the PowerScan

™

M8300 Address

(from 0000 to 1999).

All readers used in the same area must have different addresses.

Set First STAR-System™ Address

ÌRSRÎ

+

four digits from the Numeric Table in the range 0000 to 1999

Set Last STAR-System™ Address

ÌRTTÎ

+

four digits from the Numeric Table in the range 0000 to 1999

9.

Whenever the system is composed of a single base station, the first and last base station addresses (steps 7 and 8) must have the same value.

Exit and Save Configuration

Ì$-?Î

END of procedure. YOUR READER IS NOW READY TO READ CODES.

Quick Reference Guide 13

PowerScan™ M8300 Default Configuration

POWERSCAN

™

M8300 DEFAULT CONFIGURATION

DATA FORMAT code identifier disabled, field adjustment disabled, code length not transmitted, character replacement disabled

CODE SELECTION enabled codes

• EAN 8/EAN 13 / UPC A/UPC E without ADD ON check digit transmitted, no conversions

• Interleaved 2/5 check digit control and transmission, variable length code; 4-99 characters

• Standard Code 39 no check digit control, variable length code; 1-99 characters

• Code 128 variable length code; 1-99 characters disabled codes

EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI, Code 11, Code 16K,

Code 49, GS1 DataBar™ (GS1 DataBar™ includes the following symbologies: GS1

DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Expanded and GS1

DataBar Limited).

RADIO PARAMETERS radio protocol timeout = 2 seconds, power-off timeout = 4 hours, transmission mode = one-way, beeper control for radio response = normal, single store disabled, batch mode disabled, find me enabled, radio RX timeout = disable

14 PowerScan™ M8300

Technical Features

TECHNICAL FEATURES

Electrical Features

Battery Type

Time of recharge

Operating autonomy

(continuous reading)

Display

(Only available with some models)

Indicators

2150 Li-Ion battery pack max. 4 hours with external power supply max. 10 hours with Host power

60,000 reads (typical)

LCD 4 lines x 16 chars

Programmable font and backlight

Laser Features

Power (max) in mW

Light Source

Scan Rate

Reading Field Width

(typical)

Max. Resolution

PCS minimum

(Datalogic Test Chart)

Scan Angle

Laser Safety Class

Radio Features

Radio Frequency

Bit rate

Range (in open air)

System Configuration

Max. number of devices per base station

Max. number of devices in the same reading area

Environmental Features

Working Temperature

Storage Temperature

Humidity

Drop resistance

(on concrete)

Protection Class

Mechanical Features

Weight (with batteries)

Dimensions

Material

Good Read LED green

Good Read Spot green

Beeper

M8300

0.9 mW

M8300-AR

1.3 mW

VLD in the range between 630~680 nm

35 ± 5 scans/sec see reading tables

0.076 mm (3 mils)

15%

0.19 mm (7.5 mils)

25%

42°

2 (EN 60825-1 / CDRH)

European Models

433.92 MHz

19200 baud

50 m

BC-80X0

32

2000

-20° to +50

-20° to +70

USA Models

910 MHz

36800 baud

30 m

STARGATE™

255

C / -4 to +122 °F

C / -4 to +158 °F

90% non condensing

2 m

IP65 (IP64 for models with display) about 400 g (14.10 oz)

13.5°

 0.7

212 x 109 x 71 mm (8.34 x 4.29 x 2.79 in)

Polycarbonate molded with rubber

Quick Reference Guide 15

Reading Tables

READING TABLES

PowerScan™ M8300

13

20

40 mil

5

7,5

10

PowerScan™ M8300 AR

Typical reading distance with good quality codes

2.1 - 13.3 cm / 0.8 - 5.2 in

3.5 - 24.2 cm / 1.4 - 9.5 in

2.9 - 42.8 cm / 1.1 - 16.8 in

2.3 - 55.1 cm / 0.9 - 21.7 in

6.3 - 78.5 cm / 2.5 - 30.9 in

2.5 - 97.8 cm / 1.0 - 38.5 in mil

7,5

10

15

20

40

55

100

(refl. Paper)

Typical reading distance with good quality codes

18 - 50 cm / 7.0 - 19.7 in

18 - 85 cm / 7.0 - 33.5 in

15 - 165 cm / 5.9 - 65.0 in

12 - 210 cm / 4.7 - 82,7 in

18 - 375 cm / 7.0 - 147.6 in

25 - 485 cm / 9.8 in - 15.9 ft

1.5 - 12.5 m / 4.9 - 41.0 ft

16 PowerScan™ M8300

DATALOGIC SCANNING LIMITED FACTORY WARRANTY

DATALOGIC SCANNING

LIMITED FACTORY WARRANTY

WARRANTY COVERAGE

Datalogic warranties this product against defects in workmanship and materials, for a period of 3 years from the date of shipment, provided that the product is operated under normal and proper conditions.

Datalogic Scanning ("Datalogic") hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty and restore the product to its normal operating condition. Repair or replacement of product during the warranty does not extend the original warranty term. Products are sold on the basis of specifications applicable at the time of manufacture and Datalogic has no obligation to modify or update products once sold.

If Datalogic determines that a product has defects in material or workmanship,

Datalogic shall, at its sole option repair or replace the product without additional charge for parts and labor, or credit or refund the defective products duly returned to

Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products. Customer will allow

Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from Datalogic for the duration published by

Datalogic for the product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices against defects in workmanship and materials on the repaired assembly for a 90 day period starting from the date of shipment of the repaired product from Datalogic or until the expiration of the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance of, damage to, or loss of configurations, data, and applications on the repaired units and at its sole discretion can return the units in the "factory default" configuration or with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up copy of its software and data.

WARRANTY CLAIMS PROCESS

In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return of the product to a designated Datalogic service center. If Datalogic determines Customer's claim is valid, Datalogic will repair or replace product without additional charge for parts and labor. Customer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. Failure to follow the applicable RMA policy, may result in a processing fee. Customer shall be responsible for return shipment expenses for products which Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair.

Quick Reference Guide 17

DATALOGIC SCANNING LIMITED FACTORY WARRANTY

WARRANTY EXCLUSIONS

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service personnel or its authorized representatives;

(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic;

(iii) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus;

(iv) any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in accordance with product manual;

(v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and external component damage or destruction of the whole unit, consumable items;

(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or software upgrades, software or hardware reconfigurations etc.;

(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation and/or

(viii)any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, triggers etc.).

NO ASSIGNMENT

Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS

OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT

LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE

FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE

REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET

FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER'S SOLE AND EXCLUSIVE

REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE

LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY

INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES

REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY

OF SUCH DAMAGES.

RISK OF LOSS

Customer shall bear risk of loss or damage for product in transit to Datalogic.

Datalogic shall assume risk of loss or damage for product in Datalogic's possession. In the absence of specific written instructions for the return of product to Customer,

Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.

18 PowerScan™ M8300

Service and Support

SERVICE AND SUPPORT

Datalogic provides several services as well as technical support through its website.

Log on to www.scanning.datalogic.com and click on the links indicated for further information including:

•

•

•

-

-

-

-

-

PRODUCTS

Search through the links to arrive at your product page where you can download specific Manuals and Software & Utilities including:

Datalogic Aladdin™, a multi-platform utility program that allows device configuration using a PC. It provides RS-232 interface configuration as well as configuration barcode printing.

SERVICE & SUPPORT

Technical Support - Product documentation and programming guides and

Technical Support Department in the world

Service Programs - Warranty Extensions and Maintenance Agreements

Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)

Repairs.

Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.

CONTACT US

Information Request Form and Sales & Service Network

Quick Reference Guide 19

Compliance

COMPLIANCE

This device must be opened by qualified personnel only.

The batteries must be removed before opening the device.

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment.

This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation.

FCC ID U4F0015.

RADIO COMPLIANCE

Contact the competent authority responsible for the management of radio frequency devices of your country to verify any possible restrictions or licenses required.

Refer to the web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm

for further information.

LASER SAFETY COMPLIANCE

The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN60825-1 at the date of manufacture.

The laser light is visible to the human eye and is emitted from the output window (1).

Laser warning and classification label (2).

La utilización de procedimientos o regulaciones diferentes de aquellas describidas en la documentación puede causar una exposición peligrosa a la luz láser visible.

CAUTION

The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam momentarily causes no known biological damage, avoid staring at the

20 PowerScan™ M8300

Compliance beam as one would with any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even through reflective surfaces such as mirrors, etc.

The following information is shown on the laser scanner device class label:

ITALIANO

Classe 2:

LUCE LASER

NON FISSARE IL RAGGIO

APPARECCHIO LASER DI

CLASSE 2

DEUTSCH

Klasse 2:

LASERSTRAHLUNG

NICHT IN DEN STRAHL

PRODUKT DER LASERKLASSE 2

FRANÇAIS

Classe 2:

RAYON LASER

EVITER DE REGARDER LE

RAYON

APPAREIL LASER DE

CLASSE 2

ESPAÑOL

Clase 2:

RAYO LÁSER

NO MIRAR FIJO EL RAYO

APARATO LÁSERDE CLASE 2

LED CLASS

Class 1 LED product.

This product conforms to EN60825-1:2001.

IC (INDUSTRY CANADA)

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Quick Reference Guide 21

Compliance

WEEE COMPLIANCE

Waste Electrical and Electronic Equipment (WEEE) Statement

English

For information about the disposal of Waste Electrical and Electronic Equipment

(WEEE), please refer to the website at www.scanning.datalogic.com.

Italian

Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www.scanning.datalogic.com.

French

Pour toute information relative à l’élimination des déchets électroniques (WEEE), veuillez consulter le site Internet www.scanning.datalogic.com.

German

Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten Sie auf der Webseite www.scanning.datalogic.com.

Spanish

Si desea información acerca de los procedimientos para el desecho de los residuos del equipo eléctrico y electrónico (WEEE), visite la página Web www.scanning.datalogic.com.

Portuguese

Para informações sobre a disposição de Sucatagem de Equipamentos Eléctricos e

Eletrônicos (WEEE - Waste Electrical and Electronic Equipment), consultar o site web www.scanning.datalogic.com.

Chinese

有关处理废弃电气电子设备 (WEEE) 的信息， 请参考 Datalogic 公司的网站： http://www.scanning.datalogic.com/。

Japanese

廃電気電子機器 (ＷＥＥＥ) の処理についての関連事項は

Datalogic のサイト www.scanning.datalogic.com, をご参照下さい。

22 PowerScan™ M8300

NUMERIC TABLE

Ì01Î

0

Ì23Î

2

Ì45Î

4

Ì67Î

6

Ì89Î

8

Quick Reference Guide

Numeric Table

Ì12Î

1

Ì34Î

3

Ì56Î

5

Ì78Î

7

Ì9:Î

9

23

Numeric Table

NOTES

24 PowerScan™ M8300

Datalogic Scanning, Inc.

959 Terry Street

Eugene, OR 97402

USA

dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el

PowerScan™ Mxxx; Cordless Barcode Reader

e tutti i suoi modelli and all its models et tous ses modèles und seine Modelle y todos sus modelos

07

sono conformi alla Direttiva del Consiglio Europeo sottoelencata: are in conformity with the requirements of the European Council Directive listed below: sont conformes aux spécifications de la Directive de l'Union Européenne ci-dessous: der nachstehenden angeführten Direktive des Europäischen Rats entsprechen: cumple con los requisitos de la Directiva del Consejo Europeo, según la lista siguiente:

1999/5/EEC R&TTE

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

ETSI EN 301 489-3 v1.4.1, August 2002:

E

LECTRO

M

AGNETIC

C

OMPATIBILITY AND

R

ADIO SPECTRUM

M

ATTERS

(ERM); E

LECTRO

M

AGNETIC

C

OMPATIBILITY

(EMC)

STANDARD FOR RADIO

EQUIPMENT AND SERVICES

; P

ART

3: S

PECIFIC CONDITIONS FOR

S

HORT

-

R

ANGE

D

EVICES

(SRD)

OPERATING ON FREQUENCIES BETWEEN

9

K

H

Z AND

40 GH

Z

ETSI EN 300 220-3 v1.1.1, September 2000:

E

LECTROMAGNETIC COMPATIBILITY AND

R

ADIO SPECTRUM

M

ATTERS

(ERM); S

HORT

R

ANGE

D

EVICES

(SRD); R

ADIO EQUIPMENT TO BE USED IN

THE

25 MH

Z TO

1000 MH

Z FREQUENCY RANGE WITH POWER LEVELS

RANGING UP TO

500

M

W; P

ART

3: H

ARMONIZED

EN

COVERING ESSEN

-

TIAL REQUIREMENTS UNDER ARTICLE

3.2

OF THE

R&TTE D

IRECTIVE

EN 60950-1, December 2001:

I

NFORMATION TECHNOLOGY EQUIPMENT

– S

AFETY

–

P

ART

1: G

ENERAL REQUIREMENTS

December 14th, 2007

Australia

Datalogic Scanning Pty Ltd

Telephone: [61] (2) 9870 3200 [email protected]

France and Benelux

Datalogic Scanning SAS

Telephone: [33].01.64.86.71.00

[email protected]

Germany

Datalogic Scanning GmbH

Telephone: 49 (0) 61 51/93 58-0 [email protected]

India

Datalogic Scanning India

Telephone: 91- 22 - 64504739 [email protected]

Italy

Datalogic Scanning SpA

Telephone: [39] (0) 39/62903.1

[email protected]

Japan

Datalogic Scanning KK

Telephone: 81 (0)3 3491 6761 [email protected]

Latin America

Datalogic Scanning, Inc

Telephone: (305) 742-2206 [email protected]

Singapore

Datalogic Scanning Singapore PTE LTD

Telephone: (65) 6435-1311 [email protected]

Iberia

Datalogic Scanning SAS Sucursal en

España

Telephone: 34 91 746 28 60 [email protected]

United Kingdom

Datalogic Scanning LTD

Telephone: 44 (0) 1582 464900 [email protected]

www.scanning.datalogic.com

Datalogic Scanning, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

©2007-2011 Datalogic Scanning, Inc. 820035914 (Rev J) July-2011