CYP CHDBT-1H7CE Operation Manual
Add to my manuals
13 Pages
CYP CHDBT-1H7CE seamlessly transmits HDMI signals over HDMI and CAT5e/6/7 cables, allowing you to extend your display up to 100 meters. With support for resolutions up to 4Kx2K, this device is perfect for high-definition video applications. Additionally, it features Ethernet transmission, PoE, and bi-directional IR control, making it a versatile solution for a variety of setups.
advertisement
CHDBT-1H7CE
1 by 8 HDMI over HDMI & CAT5e/6/7 with PoE and Ethernet Transmitter
DRAFT
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means— electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.0 September 2011
DRAFT
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
RDV1
DRAFT
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 2
6. Operation Controls and Functions ....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel .........................................3
6.3 IR Cable Pin Assignment..................5
7. Connection Diagram ........................... 6
8. Specifications ........................................ 7
8.1 CAT5e/6/7 Cable Specification .....8
9. Acronyms ............................................... 8
DRAFT
1
1. INTRODUCTION
The HDMI over HDMI and CAT5e/6/7 Transmitter can support resolutions up to 1080p Full HD, 4Kx2K timing, 3D and multi-channel digital audio formats to one HDTV and seven CAT5e/6/7 outputs.
The HDMI can be connected to HDMI display for instant nearby display and the CAT5e/6/7 can be connected to CAT5e/6/7 to HDMI
Receivers for distance up to 100 meters. Further, a total of 100Mbps
Ethernet transmission rate allows all connected device to share the
Ethernet service and the PoE function free the power shortage issue from the Receiver end.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• HDMI over HDMI & CAT5e/6/7 with PoE and Ethernet Transmitter
• IR Receiver x 1
• IR Blaster x 1
• 24V DC Power Adaptor
• Power Cord
• Operation Manual
DRAFT
• HDMI over CAT5e/6/7 Receivers with industry CAT5e/6/7 cables
5. FEATURES
• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant
• The HDMI and CAT5e/6/7 outputs are playing the same source simultaneously
• Supports one HDTV and seven CAT5e/6/7 outputs
• Supports data rate from 250Mbps up to 3Gbps
• Supports wide range of PC resolutions from VGA to WUXGA and HDTV resolutions up to 4Kx2K (3840x2160@30Hz and
4096x2160@24Hz)
• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32-192kHz sample rate)
• Supports distances up to 100 meters through CAT5e/6/7 cables
• Supports Ethernet transmission rate up to 100Mbps
• Can select Standard or TV EDID
• Supports USB service port
• The 3D signal display follow by display TV’s EDID
• Supports PoE with capable Receiver units
• Supports Bi-directional IR control
Note:
1. This system was tested with CAT6/23AWG cables, results may vary
with cables of a different specification.
2. The PoE function is designed for powering compatible Receiver
DRAFT
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI
LINK LINK 1 LINK 2 LINK 3
CAT5e / 6 / 7 OUT
LINK 4 LINK 5 LINK 6 LINK 7 POWER SYNC
1 2 3 4
1
POWER LED: Once the power supply is connected the LED will illuminate
2
SYNC: This LED will illuminate when the HDMI input port connected to the source.
3
HDMI LINK: This LED will illuminate when HDMI output is connected to TV or display monitor.
4
LINK 1~7: The link LED will illuminate when CAT5e/6/7 output(s) has been connected to the Receiver(s) and the Receiver(s) has connected with display that shows image on screen.
3
6.2 Rear Panel
HDMI IN
1 2
HDMI OUT 2 3
CAT5e / 6 / 7 OUT
4
3
5 6 7 LAN
4
IR IN IR OUT
5 6
EDID
STD
1
DRAFT
TV
SERVICE
DC 24V
7 8 9
1
HDMI IN:
Connect with source equipment such as DVD/Blu-ray or
PS3 player.
2
HDMI OUT: Connect to HDMI display for instant image display or cascade with another family type Transmitter.
3
CAT5e/6/7 OUT 1~7: Connect these ports to CAT5e/6/7 to HDMI
Receivers (with or without PoE function) with CAT5e/6/7 cable to extend the signal up to 100m.
4
LAN:
Connect to intra-net or internet service system for a total sharing rate of 100Mbps within the link of Transmitter.
Warning: DO NOT connect this slot with any of the CAT5e/6/7 port, doing so may trigger a power shot down and ruin the device.
5
IR IN:
Connect with IR Extender to receive IR signal from Transmitter side and blast out at Receiver side. Ensure that remote controller being used is within the direct line-of-sight of the IR Extender.
6
IR OUT: Connect with IR Blaster to blast out the IR signal received from the Receiver side. Place the IR Blaster in direct line-of-sight of the equipment to be controlled.
7
EDID STD/TV: The default factory setting is on TV, leave as it is when the display is properly. The unit will detect the 1 st CAT5e/6/7 output’s EDID when it obtain a 4Kx2K EDID and send out the signal accordingly to other output ports. If the 1 st CAT5e/6/7 output is without a 4Kx2K's EDID the unit will detect all output's EDID and send out the signal that all outputs can accept.
This device obtain the last memory function therefore, the device will use the last output port 1's EDID when output port 1 is not connected to a display after power cycling or switch in between the EDID setting.
Switch to STD to use build-in EDID if the display has problem. STD
EDID's video at 1080p@60Hz and audio at LPCM 2CH.
8
SERVICE: This slot is reserved for factory service only.
9
DC 24V: Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet.
DRAFT
4
5
6.3 IR Cable Pin Assignment
IR Blaster
1
2
3
Power 3.3 V
IR Blaster Signal
NC
IR Extender
1
2
3
IR Signal
Power 3.3 V
Grounding
DRAFT
7. CONNECTION DIAGRAM
Blu-ray or PS3 Player
HDMI
HDMI IN HDMI OUT 1 2 3
CAT5e / 6 / 7 OUT
4 5 6 7 LAN IR IN IR OUT
EDID SERVICE
STD TV
DC 24V
1.5m
60°
HDMI
3D TV/Display
Power
IR2 Blaster
IR1 Extender
Link
CAT5e/6 In
3D TV/Display
Router (with Internet
Connection)
3m
IR BLASTER
DRAFT
60°
3m
6
7
8. SPECIFICATIONS
Video Bandwidth
Input ports
Resolution
Output ports
300Mbps/10.2Gbps
1 x HDMI,
1 x IR IN, 1 x LAN*,
1 x USB (Service only)
1 x HDMI,
7 x CAT5e/6/7
1 x IR OUT,
Up to 4Kx2K
(3840x2160@30Hz/4096x2160@24Hz)
N/A
Up to 100m
HDMI Input Cable Distance
CAT5e/6/7 Output
Cable Distance
IR Frequency
Power Supply
30~50kHz
24V / 6.25A DC (US/EU standards, CE/FCC/
UL certified)
432 mm(W) x 178 mm(D) x 49 mm(H)
Dimensions
Weight
Chassis Material
Silkscreen Color
ESD Protection
Storage Temperature
Relative Humidity
Power Consumption
2140 g
Metal
Black
DRAFT
85W
8.1 CAT5e/6/7 Cable Specification
Cable
Type
Range Pixel clock rate
Video Data
Rate
CAT5e/6/7 100 m <=225 MHz <=5.3 Gbps
(HD Video)
70 m >225 MHz > 5.3 Gbps
(Ultra HD
Video)
Supported Video
Up to 1080p, 60 Hz, 36 bits, 3D (data rates lower than 5.3 Gbps or below 225 MHz
TMDS clock).
4K2K, 30Hz video formats
9. ACRONYMS
ACRONYM
4Kx2K
COMPLETE TERM
3840x2160 / 4096x2160
DTS
EDID
HDCP
HDMI
HDTV
Digital Theater System
Extended Display Identification Data
High-Definition Multimedia Interface
High-Definition Television
High-bandwidth Digital Content Protection
DRAFT
8
DRAFT
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
20130531MPM-CHDBT-1H7CE
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project