User’s Guide

W1953S

W2053S

W2253S

M

ake sure to read the Important Precautions before using the product.

Keep the User's Guide(CD) in an accessible place for future reference.

S

ee the label attached on the product and give the information to your dealer when you ask for service.

Downloaded from ManualMonitor.com Manuals

Important Precautions

This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

Do not Open the Display:

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF.

Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.

Use only a stand recommended by the manufacturer.

Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.

It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display.

When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.

In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock.

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.

Important Precautions

Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.

However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product.

Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.

Otherwise, it may cause damage to the screen.

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

On Disposal

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Connecting the stand

1

.

Place the monitor with its front facing downward on a soft cloth.

2

.

Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.

Stand Body

Stand Base

3

. Tie down the base lock to perpendicularity direction.

4

.

Once assembled take the monitor up carefully and face the front side

Important

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

Connecting the Display

Disassembling the stand

1.

Put a cushion or soft cloth on a flat surface.

2.

Place the monitor face down on the cushion or soft cloth.

3.

Change your lock on the product as it follows and turn it in the arrow direction.

If you can't release the stand base even the locking rib is at a release position,

Please push the indicated rib down and retry it.

4.

Pull out the stand to remove.

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Positioning your display

1.

Adjust the position of the panel in various ways for maximum comfort.

Tilt Range: -5˚~15˚

-5 15

Ergonomic

It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.

Connecting the Display

Using the Computer

1.

Make sure to turn off the computer and product. Connect the cable as below sketch map form

1

to

2

.

A

Connect D-sub Cable (PC)

B

Connect D-sub Cable (Mac)

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.

Power Cord

Analog signal

D-sub

Wall-outlet type

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

2.

Press button on the front switch panel to turn the power on. When monitor power is turned on, the

'Self Image Setting Function' is executed automatically.

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.

Connecting the Display

Using the cable holder

(This feature is not available in all models.)

1 2

4

O

P

E

N

3

Cable holder

Control Panel Functions

Front Panel Controls

1

2

3 4

5

6

7 8

Control Function

Button

Use this button to enter CINEMA MODE,AUTO

BRIGHT,TIME CONTROL,LIVE SENSOR,SMART items, for more information,refer to page A16.

Button

MENU Button

Use this button to enter EZ ZOOMING, 4:3 IN WIDE,

PHOTO EFFECT items, for more information, refer to page A17-A18.

Use this button to enter or exit from the On Screen Display.

OSD LOCKED/UNLOCKED

This function allows you to lock the current control settings, so that these settings are not inadvertently changed. To lock the

OSD settings, press and hold the MENU button for several seconds. The message "OSD LOCKED" appears.

You can unlock the OSD settings at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" appears.

Control Panel Functions

Control Function

(

Buttons

Button

)

Use these buttons to select or adjust functions in the On

Screen Display.

For more information, refer to page A19.

AUTO/SET

Button

Power Button

Use this button to select an icon in the On Screen

Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press the AUTO/SET button prior to entering the On

Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).

The best display mode is:

W1953S: 1360 x 768

W2053S: 1600 x 900

W2253S: 1920 x1080

Use this button to turn the display on or off.

Power Indicator

This Indicator lights up as red when the display is operating normally(On Mode). If the display is in

Sleep Mode (Energy Saving), this indicator color changes to flicker.

Light sensor

This is lens for light sensor sletect outside luminance, when setting AUTO BRIGHT ON.

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system.

A short example is given below to familiarize you with the use of the controls.

The following section is an outline of the available adjustments and selections you can make using the OSD.

NOTE

Allow the display to stabilize for at least 30 minutes before making image adjustments.

To make adjustments in the On Screen Display, follow these steps:

Press the MENU Button, then the main menu of the OSD appears.

To access a control, use the or Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button.

Use the / Buttons to adjust the image to the desired level. Use the

AUTO/SET Button to select other sub-menu items.

Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD.

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment, and setting menus.

Main menu Sub-menu A Reference

CINEMA MODE

AUTO BRIGHT

TIME CONTROL

LIVE SENSOR

SMART

EZ ZOOMING

4:3 IN WIDE

To focus on the moving picture selected

To control screen brightness automatically

To mind user using time

To control touch key distance

To control smart key menu

To adjust the resolution

To adjust the image size

PHOTO

EFFECT

PICTURE

COLOR

TRACKING

SETUP

FLATRON

F-ENGINE

NORMAL

GAUSSIAN BLUR

SEPIA

MONOCHROME

BRIGHTNESS

CONTRAST

GAMMA

PRESET

RED

GREEN

BLUE

HORIZONTAL sRGB

6500K

9300K

VERTICAL

CLOCK

PHASE

SHARPNESS

LANGUAGE

OSD

POSITION

HORIZONTAL

VERTICAL

WHITE BALANCE

POWER INDICATOR

FACTORY RESET

MOVIE

INTERNET

USER

NORMAL

DEMO

To adjust screen color mode

To adjust the brightness, contrast and gamma of the screen

To costomize the color of the screen

To adjust the position of the screen

To improve the clarity and stability of the screen

To costomize the screen status for a user's operating environment

To select or customize desired image settings

: Adjustable

A : Analog Input

NOTE

The order of icons may differ depending on the model (A11~A19 ).

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu.

Press the MENU Button, then the main menu of the OSD appears.

Main Menu

MENU : Exit

: Adjust (Decrease/Increase)

SET : Enter

: Select another sub-menu

: Restart to select sub-menu

Button Tip

Menu Name

Sub-menus

Icons

NOTE

OSD (On Screen Display) menu languages on the monitor may differ from the manual.

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

PICTURE

PICTURE

BRIGHTNESS

CONTRAST

GAMMA

To adjust the brightness of the screen.

To adjust the contrast of the screen.

Set your own gamma value. : -50/0/50

On the monitor, high gamma values display whitish images and low gamma values display high contrast images.

MENU : Exit

: Decrease

: Increase

SET : Select another sub-menu

COLOR

COLOR

PRESET

RED

GREEN

MENU : Exit

: Decrease

: Increase

BLUE

SET : Select another sub-menu

• sRGB: Set the screen color to fit the

SRGB standard color specification.

• 6500K: Slightly reddish white.

• 9300K: Slightly bluish white.

Set your own red color levels.

Set your own green color levels.

Set your own blue color levels.

On Screen Display(OSD) Selection and Adjustment

Main menu

TRACKING

TRACKING

Sub menu Description

HORIZONTAL

To move image left and right.

VERTICAL

To move image up and down.

CLOCK

PHASE

MENU : Exit

: Decrease

: Increase

SET : Select another sub-menu

SHARPNESS

To minimize any vertical bars or stripes visible on the screen background.

The horizontal screen size will also change.

To adjust the focus of the display.

This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

To adjust the clearness of the screen.

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

SETUP

SETUP

LANGUAGE

To choose the language in which the control names are displayed.

OSD

POSITION

To adjust position of the OSD window on the screen.

WHITE

BALANCE

If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.

Activate this function when white and black colors are present in the screen.

MENU : Exit

: Adjust

: Adjust

SET : Select another sub-menu

POWER

INDICATOR

Use this function to set the power indicator on the front side of the monitor to ON or OFF.

If you set OFF, it will go off.

If you set ON at any time, the power indicator will automatically be turned on.

FACTORY

RESET

Restore all factory default settings except

"LANGUAGE."

Press the , buttons to reset immediately.

If this does not improve the screen image, restore the factory default settings.

If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal.

On Screen Display(OSD) Selection and Adjustment

The OSD screen will appear when you touch the smart button on the right bottom of the monitor.

Main menu Sub menu Description

CINEMA MODE

It focuses better on the moving picture in selected area.

*This function is operated only if the fortemanager is installed to pc.

AUTO BRIGHT

If select on,it automatically controls the brightness of display to best suit the surrounding working environment,providing the optimal viewing condition and maximized user convenience.

If select off,auto brightness is off.

TIME CONTROL

Remind user using time by showing alarm

OSD and flickering power LED.

Selection:OFF/1HOUR/2HOUR

LIVE SENSOR

This function turns on the button LED for pushing comfortable.When detect the presence of users hand before touch it.

SMART

To adjust AUTO BRIGHT,TIME CONTROL,

LIVE SENSOR.

If select ON it turns on AUTO BRIGHT,LIVE

SENSOR and makes time CONTROL to 1HOUR.

If select off,it turns off those.

If set AUTO BRIGHT,TIME CONTROL,LIVE

SENSER directly,this setting is changed to

USER automatically.

On Screen Display(OSD) Selection and Adjustment

The OSD screen will appear when you touch the FUN button on the right bottom of the monitor.

Main menu Sub menu

EZ ZOOMING

Description

EZ Zoom lowers the display’s resolution in single-step increments. Depressing the button once lowers the resolution by one step; while a second button-press returns the resolution to the original display settings.

*This function is operated only if the forteManager is installed to PC.

4:3 IN WIDE

To select the image size of the screen.

WIDE

4:3

• WIDE: Switch to full screen mode according to input image signal.

• 4 : 3: Change the image signal ratio into 4:3.

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

PHOTO EFFECT

- NORMAL:

The PhotoEffect function is disabled.

- GAUSSIAN BLUR:

This option is to add the effect to the screen that the dark and sharp image becomes brighter and more blurred.

- SEPIA:

This option changes the screen to be Sepia tone. The Sepia tone is brown color tone.

- MONOCHROME:

This option changed the screen to be Gray tone. The screen is displayed by white, black, gray.

On Screen Display(OSD) Selection and Adjustment

The OSD screen will appear when you touch the button on the right bottom of the monitor.

Menu Name

Icons

Sub-menu Name

Main menu Sub menu Description

MOVIE

INTERNET

This feature lets you easily select the best desired image condition optimized to the environment

(ambient illumination, image types etc).

MOVIE: For animation images in videos or movies

INTERNET: For text images (Word processing etc.)

MENU : Exit

, : Move

SET : Select

USER

User

You can manually adjust ACE or RCM.

You can save or restore the adjusted value even when using a different environment.

To adjust the USER sub-menu function,press the AUTO/SET Button.

...

ACE

(Adaptive Clarity Enhancer)

: Selects the clarity mode.

...

RCM

(Real Color Management)

: Selects the color mode.

0

1

2

3

Not applied

Green enhance

Flesh tone

Color Enhance

MENU : Exit

: Decrease

: Increase

SET : Select another sub-menu

NORMAL

This is under normal operating conditions.

* Normal mode is when f-ENGINE is turned off.

DEMO

This is just for advertising to customer in the shops. It’s setting is same with Movie mode and screen is divided by half.

Troubleshooting

Check the following before calling for service.

●

Is the power cord of the display connected?

• Check and see if the power cord is connected properly to the power outlet.

●

Is the power indicator light on?

• Press the Power button.

●

Is the power indicator flickering?

• If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.

• Try to turn on the PC.

●

Do you see an "OUT OF

RANGE" message on the screen?

• This message appears when the signal from the

PC (video card) is out of horizontal or vertical frequency range of the display. See the

'Specifications' section of this manual and configure your display again.

●

Do you see a "CHECK

SIGNAL CABLE" message on the screen?

• This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see a "OSD LOCKED" message on the screen?

●

Do you see “OSD

LOCKED” when you push MENU button?

• You can secure the current control settings, so that they cannot be inadvertently changed.

You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message

“OSD UNLOCKED” will appear.

Troubleshooting

Display image is incorrect

●

Display Position is incorrect.

• Press the AUTO/SET button to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display.

●

On the screen background, vertical bars or stripes are visible.

• Press the AUTO/SET button to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display.

●

Any horizontal noise appearing in any image or characters are not clearly portrayed.

• Press the AUTO/SET button to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.

• Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits

(true color).

Important

Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.

If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.

The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer

.

Troubleshooting

Display image is incorrect

❁ The screen color is mono or abnormal.

• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

•Make sure the video card is properly inserted in the slot.

•Set the color setting higher than 24 bits (true color) at Control Panel -Settings .

❁ The screen blinks.

• Check if the screen is set to interlace mode and if yes,change it to the recommend resolution.

Have you installed the display driver?

❁ Have you installed the display driver?

•

Be sure to install the display driver from the display driver CD (or diskette)that comes with your display.Or,you can also download the driver from our web site:http://www.lge.com.

❁ Do you see an

"Unrecognized monitor,

Plug&Play (VESA DDC) monitor found" message?

•

Make sure to check if the video card supports

Plug&Play function.

Specifications W1953S

Display

Sync Input

Video Input

Resolution

Plug&Play

Power

Consumption

Dimensions

& Weight

Tilt Range

Power Input

Environmental

Conditions

Stand Base

Power cord

18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD

Anti-Glare coating

Visible diagonal size: 47.0 cm

0.300*0.300 mm pixel pitch

Horizontal Freq.

30 - 83 kHz (Automatic)

Vertical Freq.

56 - 75 Hz (Automatic)

Input Form Separate TTL, Positive/Negative

SOG (Sync On Green)

Signal Input 15 pin D-Sub Connector

Input Form

Max

Recommend

RGB Analog (0.7 Vp-p/ 75 ohm)

VESA 1360 x 768 @ 60 Hz

VESA 1360 x 768 @60 Hz

DDC 2AB

On Mode

Sleep Mode

Off Mode

≤

≤

: 22W(Typ.)

1 W

1 W

With Stand Without Stand

Width 45.15 cm / 17.77 inches 45.15 cm / 17.77 inches

Height 35.74 cm / 14.07 inches 29.72 cm / 11.70 inches

Depth 19.80 cm / 7.79 inches 5.85 cm / 2.30 inches

Net 3.45 kg (7.60 lbs)

Tilt -5˚~ 15˚

AC 100-240V~ 50/60Hz 0.8A

Operating Conditions

Temperature 10˚C to 35 ˚C

Humidity

Storage Conditions

10 % to 80 % non-Condensing

Temperature -20˚C to 60 ˚C

Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

NOTE

Information in this document is subject to change without notice.

Specifications W2053S

Display

Sync Input

Video Input

Resolution

Plug&Play

Power

Consumption

Dimensions

& Weight

Tilt Range

Power Input

Environmental

Conditions

Stand Base

Power cord

20 inches (50.8 cm) Flat Panel Active matrix-TFT LCD, Anti-

Glare coating

Visible diagonal size: 50.8 cm

0.0922(H)*0.2766(V) mm pixel pitch

Horizontal Freq.

30 - 83 kHz (Automatic)

Vertical Freq.

56 - 75 Hz (Automatic)

Input Form Separate TTL, Positive/Negative

SOG (Sync On Green)

Signal Input

Input Form

15 pin D-Sub Connector

RGB Analog (0.7 Vp-p/ 75 ohm)

Max

Recommend

DDC 2AB

VESA 1600 x 900 @60 Hz

VESA 1600 x 900 @60 Hz

On Mode

Sleep Mode

Off Mode

: 40W(Typ.)

≤

≤

1 W

1 W

With Stand Without Stand

Width 48.50 cm / 19.09 inches 48.50 cm / 19.09 inches

Height 37.56 cm / 14.78 inches 31.71 cm / 12.48 inches

Depth 18.30 cm / 7.20 inches 6.05 cm / 2.38 inches

Net 3.46 kg (7.62 lbs)

Tilt -5˚~ 15˚

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10˚C to 35 ˚C

Humidity

Storage Conditions

10 % to 80 % non-Condensing

Temperature -20˚C to 60 ˚C

Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

NOTE

Information in this document is subject to change without notice.

Specifications W2253S

Display

Sync Input

Video Input

Resolution

Plug&Play

Power

Consumption

Dimensions

& Weight

Tilt Range

Power Input

Environmental

Conditions

Stand Base

Power cord

21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD, Anti-

Glare coating

Visible diagonal size: 54.6 cm

0.248*0.248 mm pixel pitch

Horizontal Freq.

30 - 83 kHz (Automatic)

Vertical Freq.

56 - 75 Hz (Automatic)

Input Form Separate TTL, Positive/Negative

SOG (Sync On Green)

Signal Input

Input Form

15 pin D-Sub Connector

RGB Analog (0.7 Vp-p/ 75 ohm)

Max

Recommend

VESA 1920 x 1080 @60 Hz

VESA 1920 x 1080 @60 Hz

DDC 2AB

On Mode

Sleep Mode

Off Mode

: 40W(Typ.)

≤

≤

1 W

1 W

With Stand Without Stand

Width 52.25 cm / 20.57 inches 52.25 cm / 20.57 inches

Height 39.63 cm / 15.60 inches 33.66 cm / 13.25 inches

Depth 19.80 cm / 7.79 inches 6.05 cm / 2.38 inches

Net 3.90 kg (8.60 lbs)

Tilt -5˚~ 15˚

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10˚C to 35 ˚C

Humidity

Storage Conditions

10 % to 80 % non-Condensing

Temperature -20˚C to 60 ˚C

Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

NOTE

Information in this document is subject to change without notice.

Specifications

Preset Modes (Resolution)

W1953S

Display Modes (Resolution)

7

8

5

6

*9

3

4

1

2

720 x 400

640 x 480

640 x 480

800 x 600

800 x 600

832 x 624

1024 x 768

1024 x 768

1360 x 768

Horizontal Freq. (kHz)

31.468

31.469

37.500

37.879

46.875

49.725

48.363

60.123

47.712

Vertical Freq. (Hz)

75

75

60

75

60

70

60

75

60

* Recommend Mode

W2053S

Display Modes (Resolution)

7

8

5

6

*9

3

4

1

2

720 x 400

640 x 480

640 x 480

800 x 600

800 x 600

1024 x 768

1024 x 768

1152 x 864

1600 x 900

Horizontal Freq. (kHz)

31.468

31.469

37.500

37.879

46.875

48.363

60.123

67.500

60.000

Vertical Freq. (Hz)

75

60

75

75

60

70

60

75

60

* Recommend Mode

Specifications

W2253S

Display Modes (Resolution)

9

10

11

*12

7

8

5

6

3

4

1

2

720 x 400

640 x 480

640 x 480

800 x 600

800 x 600

1024 x 768

1024 x 768

1152 x 864

1280 x 1024

1280 x 1024

1680 x 1050

1920 x 1080

Horizontal Freq. (kHz)

31.468

31.469

37.500

37.879

46.875

48.363

60.123

67.500

63.981

79.976

55.935

67.500

Vertical Freq. (Hz)

75

60

75

75

70

60

75

60

60

75

60

60

* Recommend Mode

Indicator

MODE

On Mode

Sleep Mode

Off Mode

LED Color

Red

Flicker

Off

Digitally yours

Downloaded from ManualMonitor.com Manuals