*L758 2976*
While this option is in effect, the camera names all new folders
using the current date. Each time you take a photograph, the
camera will compare the current date to the folder name and
automatically create a new folder if the date has changed since
the last time a photograph was taken. Note, however, that if the
camera is left on past midnight, a new folder will not be created
until the camera has been turned off and then on again, with
the result that pictures taken before the camera was turned off
may be stored in a folder with the previous day’s date.
New Features and Options for the G700SE
Thank you for your purchase of a G700SE. This document details
new features and options for the G700SE not described in the supplied G700SE Camera User Guide. Page numbers refer to the G700SE
Camera User Guide.
1
Custom: Selecting this option displays a
text-entry dialog; use the !, ", #, $,
and MENU/OK buttons to enter a five-character suffix (e.g., “WORK1”) and press ADJ./
MEMO. The camera names the new folder
by adding a three-digit folder number in
front of the suffix (e.g., “101WORK1”).
Folder Naming Options
A New folder options item has been
added to the setup menu (page 82). Use
this item to create folders for new photographs. Choose from Standard, Date,
and Custom.
Date: Folder names take the form of a
three-digit folder number followed by
an underscore and a four-digit number
corresponding to the current month
and day (e.g., “101_0425”). Selecting
Yes displays a confirmation dialog listing
the current folder and the new folder name; highlight Yes and
press MENU/OK to create the new folder.
3
Show Folder at Startup
A Show folder at startup option has
been added to the setup menu (page 82).
If On is selected, the name of the current
folder and the number of images it contains will be displayed when the camera
is turned on.
9999
4 :33 F
4:3
4
Movies and Camera Memos
Camera memos (page 57) can now be added to movies (for
more information on using camera memos, see page 19 of the
G700SE Software User Guide).
5
Movie Playback
The ADJ./MEMO button is now used to add memos to movies (page
56); to pause or resume playback, use the shutter button.
2010/01/25 17:00
101RICOH
10
Folder Playback
Pressing 9 in the calendar display (page 38) displays a list of
folders and the number of images they contain. Press ! or "
to highlight a folder and press 8 to view the pictures it contains in the calendar display.
Single-frame view
20-frame view
4:33 F
000-0001 0001/9999
0001 9999
4:33 F
100-0009 Last File
9
9
8
2010/01
2010
2010/01/01
01/01
01 000:00
0:00
00
F3.5 1/1000
1000
81-frame view
8
2010/01
2010
2010/01/01
01/01
01 000:00
0:00
00
F3.5 1/30
30
9
6
8
Caution
If you return to folder playback after exiting to shooting mode, the camera will automatically display the folder currently being used to store
pictures.
Press the z button during playback.
Rewind
Press the Z button during playback.
Pause/Playback
Press the shutter button to pause or resume playback.
Slow Playback
Press and hold the z button during pause.
Slow Rewind
Press and hold the Z button during pause.
Next Frame
Press the z button during pause.
Previous Frame
Press the Z button during pause.
7
New Picture Quality/Size Options
j 3 : 2N, e 4 : 3N, c 4 : 3N, b 4 : 3N, and z 4 : 3N options
have been added to the Picture Quality/Size item (page 63)
in the shooting menu (page 62). The options available are
now: l 4 : 3F, l 4 : 3N, j 3 : 2F, j 3 : 2N, e 4 : 3F, e 4 : 3N,
c 4 : 3F, c 4 : 3N, b 4 : 3F, b 4 : 3N, a 4 : 3F, a 4 : 3N,
z 4 : 3F, and z 4 : 3N.
New CALS Picture Quality Options
l 4 : 3F, l 4 : 3N, j 3 : 2F, j 3 : 2N, e 4 : 3N, c 4 : 3N,
b 4 : 3N, and z 4 : 3N options have been added to CALS
Pic Quality (page 87) in the setup menu (page 82). The options available are now: l 4 : 3F, l 4 : 3N, j 3 : 2F, j 3 : 2N,
e 4 : 3F, e 4 : 3N, c 4 : 3F, c 4 : 3N, b 4 : 3F, b 4 : 3N,
a 4 : 3F, a 4 : 3N, z 4 : 3F, and z 4 : 3N.
Camera Memo Options
A Camera Memo Options item has been added to the camera
memo menu (page 94). Selecting On allows camera memos
to be used if a camera memo list file has been uploaded to the
camera.
Caution
Camera memos are not available if Off is selected, regardless of whether
a camera memo list file has been uploaded to the camera.
10
New Matrix Barcode Type
Aztec has been added to the matrix barcodes that can be selected for Barcode Type (page 97) in the camera memo menu
(page 94).
12
Playback Zoom Available with Image Memos
Images stored in camera memos can now be viewed using
playback zoom (for more information on creating and viewing
image memos, see page 38 of the G700SE Software User Guide).
When an image memo is displayed in shooting mode, you can
zoom in by pressing the 8 button. While the image is zoomed
in, the following operations can be performed:
Description
The four-letter prefix chosen by the user is followed by a fourdigit file number assigned in ascending order by the camera,
On (Continue which in turn is followed by the extension “.jpg”. When the file
numbering) number reaches 9999, a new folder is created and file numbering starts over from 0001; inserting a new memory card does
not reset file numbering.
When a new memory card is inserted, files are named using
Off (Do not
the four-letter prefix followed by a four-digit file number ascontinue
signed in ascending order by the camera. No further pictures
numbering)
can be taken once the file number reaches 9999.
• When files are copied to a computer using DL-10 (page 155), the files
saved to the computer are automatically renamed using “RIMG” in place
of the selected prefix.
• Prefixes may consist of capital letters, numbers, and underscores (lower
case can not be selected by pressing D) and must contain exactly four
characters. Pressing ADJ./MEMO has no effect when fewer than four characters are entered. The last prefix entered is displayed in the name area;
to delete the character at the current cursor position, select [Delete].
11
New Barcode Mode
The Barcode Mode item (page 97) in the camera memo menu
(page 94) now offers a fourth mode (Mode 4). The first barcode
read is stored in the memo list as the name of the first item and
the second barcode as the name of the second item. All subsequent barcodes overwrite the name of the first item. These
names are stored until the camera is turned off.
First barcode is stored as name of first item.
Camera Memo
1/45
FileName/SAMPLE
Barcode 1 1234567890
Barcode 2
Const.type Foundation work
Location Exterior
Supervisor Beverly Beech
FILE LIST
Next barcode becomes name of second item.
Memo On
Camera Memo
Barcode 1
Barcode 2
Const.type
Location
Supervisor
Add camera memo Press the ADJ./MEMO button.
9
Folder list
Option
Volume Adjustment Press the !" buttons during playback.
8
Calendar view
Fast Forward
9
Image File Names
A File name item has been added to the
setup menu (page 82). Use this option
to choose the four-letter prefix for the
image file names assigned automatically
by the camera. To enter a custom prefix,
select Custom and use the !, ", #, $,
and MENU/OK buttons to enter a four-character prefix. After entering all four characters, press ADJ./MEMO to exit.
Cautions
• If the first four letters of the file name have been changed by the user,
the Card Sequence No. item (page 86) in the setup menu (page 82)
functions as described below.
Cautions
• All new pictures are stored in the new folder. You can not store additional pictures in previously-created folders.
• The camera increments the three-digit folder number by one each
time a new folder is created. No additional folders can be created if
the storage device contains a folder numbered 999 (510 in the case of
SD WORM cards). Folder numbering is reset to 100 when the storage
device is formatted.
• Custom folder names may contain capital letters, numbers, and underscores (lower case can not be selected by pressing D) and must contain exactly five characters. Pressing ADJ./MEMO has no effect when fewer
than five characters are entered. The last file name entered is displayed
in the name area; to delete the character at the current cursor position,
select [Delete].
• Images saved to folders created using Date or Custom can not be copied to a computer using the supplied DL-10 software and must instead
be copied manually.
Standard: Folder names take the form of
a three-digit folder number followed by
“RICOH” (e.g., “101RICOH”). Highlight Yes
and press MENU/OK to create a new folder by adding one to the current folder
number.
2
8
1/45
Button
Description
8/9
Zoom in or out. Press !, ", #, or $ to view other areas of the image.
If the current magnification is less than 8×, zoom in to 8×; if the current magnification is 8× or more, zoom in to 16×. If the image is curMENU/OK
rently displayed at maximum magnification, pressing MENU/OK cancels
zoom.
The DISP. button controls the display:
FileName/SAMPLE
1234567890
ABCDEFGH
Foundation work
Exterior
Beverly Beech
Press !, ", #, or $ to view other
areas of current image
001 j pg
* 001.
FILE LIST
Later barcodes replace name of first item.
1/8
Memo On
Camera Memo
1/45
×1 . 4
Barcode 1
Barcode 2
Const.type
Location
Supervisor
Press !, ", #, or $ to view other
areas of current image
FileName/SAMPLE
abcdefghijkl
ABCDEFGH
Foundation work
Exterior
Beverly Beech
FILE LIST
Memo On
Press DISP.
Press and hold DISP.
Press and hold DISP.
001 j pg
* 001.
1/8
×1 . 4
Press # or $ to view other images at current zoom ratio
13
Multi-Frame Views Available with Image Memos
When an image memo is displayed full
frame in shooting mode, you can now
press 9 to view image memos 20 at a
time. Press 8 to view the highlighted
picture full frame, or press ADJ./MEMO to
view the camera memo dialog for the
highlighted picture.
008 j pg
* 008.
8/8
15
Compass Data Selection
When both a GP-1 and a Bluetooth®-equipped GPS unit are connected,
choose the device that will be used to supply the compass heading. Choose
GPS Options to use the GP-1, Bluetooth to use the Bluetooth®-equipped
GPS unit.
Declination
Note
The display shows only images with file names that appear in the camera
memo list.
14
New Expanded Settings
The following items have been added to the expanded settings
menu (page 98).
When using a GP-1 or Bluetooth®-equipped GPS unit that supplies compass
data, choose whether the display is corrected for magnetic declination.
Option
New Compass Heading Options
The following options are now available for Compass Heading
(page 100) in the expanded settings menu (page 98).
Description
TRUE
The compass heading is shown with respect to true north.
MAG
The compass heading is shown with respect to magnetic north.
Option
Description
Cardinal
The compass heading is displayed using points of the compass.
Caution
The heading will be shown with respect to magnetic north if the camera is unable to acquire GPS data from the GPS device.
Degrees
The compass heading is displayed in degrees.
BC_39/32
The compass heading is displayed using both points of the
compass and degrees.
Configure the optional BR-1 barcode reader to read Code 39 (Code 39), full
ASCII Code 39 (Code 39 Full Ascii), or Code 32 (Code 32) barcodes.
Cardinal/Deg.
16
Changes to the GPS Display
GPS data are now displayed during movie recording.
Caution
GPS data are not displayed when x 1280 is selected for Movie Size
(page. 63).
17
Support for “Write Once” Memory Cards
The camera now supports “Write Once” memory cards manufactured by Toshiba. Data stored on “Write Once” cards can not
be altered or deleted.
Caution
“Write Once” cards can contain up to 510 folders, each holding a maximum of 510 photographs. “Write Once” cards can not be formatted and
do not support file deletion, skew correction, movie recording, memos,
image resize, file recovery, cropping, continuous shooting, contrast correction, file protection, DPOF, or copying from internal memory to the
card.
18
Updates to EX1
Movies can now be renamed according to the contents of the
camera memo and transferred to a selected destination folder
using the supplied EX1 software as described on page 42 of the
G700SE Software User Guide.
">
