Ryobi RY24000 24 Volt Power Head, RY24020 string trimmer / edger attachment Manuale dell'operatore

PDF

Documento

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
RY24000 24 Volt Power head with
RY24020 string trimmer / edger attachment
RY24000 24 V bloc moteur avec RY24020 accessoire
de taille-bordures &agrave; ligne/coupe-bordures
RY24000 24 V cabezal motor con RY24020 accesorio
de recortadoras de hilo/recortadora de bordes
(ALL VERSIONS / TOUTES LES VERSIONS /
TODAS LAS VERSIONES)
batteries and chargers sold Separately
PileS ET CHARGEUR VENDUS S&Eacute;PAR&Eacute;MENT
LAS BATER&Iacute;AS Y EL CARGADOR SE VENDEN POR SEPARADO
Your trimmer/edger has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
Merci de votre achat.
CONSERVER CE MANUEL POUR
FUTURE R&Eacute;F&Eacute;RENCE
Le agradecemos su compra.
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
See this fold-out section for all the figures &shy;referenced
in the operator’s manual.
Voir que cette section d’encart pour toutes les
figures a adress&eacute; dans le manuel d’utilisation.
Vea esta secci&oacute;n de la p&aacute;gina desplegable para
todas las figuras mencion&oacute; en el manual del operador.
Fig. 2
Fig. 1
Fig. 5
a
B
b
a
c
A-Phillips screwdriver (tournevis phillips,
destornillador phillips)
E
a
D
Fig. 3
a
B
A-Screw holes (orifices de las vis, agujeros del
tornillo)
B-Screws (vis, tornillos)
F
Fig. 6
A-Coupler (coupleur, acoplador)
B-Base (base, base)
i
j
Fig. 4
a
E
H
a
b
D
G
Fig. 7
C
a
F
A-Grass deflector (d&eacute;flecteur d’herbe, deflector
de hierba)
B-Slide over string head and turn
counterclockwise (faire glisser sur la t&ecirc;te et
tourner dans le sens anti-horaire, deslizarlo
sobre el cabezal y girarlo en sentido
antihorario)
C-Line head (t&ecirc;te de lligne, cabezal del l&iacute;nea)
D-Line cut-off blade (lame de sectionnement
de ligne, cuchilla de corte del hilo)
E-Screws (vis, tornillos)
F
-
Motor housing (bo&icirc;tier du moteur,
alojamiento del motor)
ii
b
A-Lock-out button (bouton de verrouillage,
bot&oacute;n de seguro de seguro)
B
-
Switch trigger (g&acirc;chette, gatillo del
interruptor)
Fig. 11
Fig. 8
b
A
A
A-Knob (bouton, perilla)
Fig. 9
Fig. 12
A
b
Fig. 16
A
F
C
B
A-Black button (bouton noir, bot&oacute;n negro)
B-Line (ligne, l&iacute;nea)
Fig. 13
e
D
B
Fig. 10
A
A
Fig. 14
A-Spool retainer (retenue de bobine, ret&eacute;n del
carrete)
B - Spool (bobine, carrete)
C - Tabs (languettes, pesta&ntilde;as)
D - Slots (fentes, ranuras)
E-Eyelet (trou, agujero)
F-Slot (fente, ranura)
Fig. 17
C
B
WIND CLOCKWISE
ENROULER DANS LE SENS HORAIRE
ENROLLE HACIA LA DERECHA
A
A-Direction of rotation (sens de rotation,
sentido de la rotaci&oacute;n)
B - Best cutting area (d’efficacit&eacute;, &aacute;rea de corte
&oacute;ptima)
C
-Dangerous cutting area (zone de coup
dangereuse, &aacute;rea de corte peligrosa)
A
B
A-Foot pedal (p&eacute;dale de pied, pedal de pie)
iii
A-Spool (bobine, carrete)
B-Hole (trou, agujero)
TABLE OF CONTENTS
TABLE DES MATI&Egrave;RES / &Iacute;NDICE DE CONTENIDO
Introduction....................................................................................................................................................................... 2
 Important Safety Instructions.........................................................................................................................................3-4
Symbols............................................................................................................................................................................. 5
Symboles / S&iacute;mbolos
Features............................................................................................................................................................................. 6
Caract&eacute;ristiques / Caracter&iacute;sticas
Assembly........................................................................................................................................................................6-7
Assemblage / Armado
Operation........................................................................................................................................................................7-8
Utilisation / Funcionamiento
Troubleshooting............................................................................................................................................................... 10
Warranty.......................................................................................................................................................................... 11
 Parts Ordering and Service................................................................................................................................Back Page
Commande de pi&egrave;ces et r&eacute;paration / Pedidos de piezas y servicio.......................................................... Page arri&egrave;re / P&aacute;g. posterior
introduction
Introduction / Introducci&oacute;n
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product making it easy to maintain and operate.
***
Ce produit offre de nombreuses fonctions destin&eacute;es &agrave; rendre son utilisation plus plaisante et satisfaisante. Lors de la
conception de ce produit, l’accent a &eacute;t&eacute; mis sur la s&eacute;curit&eacute;, les performances et la fiabilit&eacute;, afin d’en faire un outil facile &agrave;
utiliser et &agrave; entretenir.
***
Este producto ofrece numerosas caracter&iacute;sticas para hacer m&aacute;s agradable y placentero su uso. En el dise&ntilde;o de este producto
se ha conferido prioridad a la seguridad, el desempe&ntilde;o y la fiabilidad, por lo cual se facilita su manejo y mantenimiento.
2 — English
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
When using electric gardening appliances, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock and personal injury.
read all instructions
 For safe operation, read and understand all instructions
before using this product. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.
 Do not allow children or untrained individuals to use this
unit.
Check the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or string which
can be thrown or become entangled in the machine.
 Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Following this rule will reduce
the risk of serious personal injury.
Use Safety Glasses – Always use face or dust mask if
operation is dusty.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.
 Dress Properly – Use of rubber gloves and substantial
footwear is recommended when working outdoors. Wear
heavy, long pants, long sleeves, boots, and gloves. Do
not wear loose fitting clothing, short pants, sandals, or
go barefoot. Do not wear loose clothing or jewelry. They
can be caught in moving parts. Secure long hair above
shoulder level to prevent entanglement in moving parts.
Keep children away – Keep all bystanders, children, and
pets at least 50 ft. away.
Stay alert – Watch what you are doing. Use common
sense. Do not operate this unit when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
Keep all parts of your body away from any moving part.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the
dust or fumes.
Avoid body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is grounded.
Avoid Dangerous Environments – Don’t expose appliance
or string trimmer to rain or wet conditions. Water entering
an appliance or string trimmer will increase the risk of
electric shock.
Use Right Appliance – Do not use appliance for any job
except that for which it is intended. Do not force tool.
Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is
designed.
Don’t Force Appliance – It will do the job better and with
less likelihood of a risk of injury at the rate for which it
was designed.
Do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces.
Do not overreach – Keep firm footing and balance.
Overreaching can result in loss of balance.
Avoid accidental starting – Be sure switch trigger is in
the locked or off position before inserting battery pack.
Carrying tools with your finger on the switch trigger or
inserting the battery pack into a tool with the switch on
invites accidents.
Do not use tool if switch trigger does not turn it on or off.
Any tool that cannot be controlled with the switch trigger
is dangerous and must be repaired.
Disconnect trimmer – Disconnect battery pack from
the appliance before storing, servicing, or changing
accessories such as cutting line. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Use only identical manufacturer’s replacement parts and
accessories. Use of any other parts may create a hazard
or cause product damage.
 Maintain appliance with care – Replace string head if
cracked, chipped, or damaged in any way. Be sure the
string head is properly installed and securely fastened.
Failure to do so can cause serious injury. Keep handles dry,
clean and free from oil and grease. Follow instructions for
lubrication and changing accessories. Inspect cultivator
cord periodically and, if damaged, have it replaced. Keep
handles dry, clean, and free from grease and oil.
Maintain appliance with care – Replace string head if
cracked, chipped, or damaged in any way. Be sure the
string head is properly installed and securely fastened.
Failure to do so can cause serious injury. Follow instructions for lubrication and changing accessories. Inspect
cultivator cord periodically and, if damaged, have it
replaced. Keep handles dry, clean, and free from grease
and oil.
Checked Damaged Parts – Before further use of the appliance, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly
and perform its function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting and any other condition that may effect its operation.
A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center unless indicated elsewhere in this manual.
3 — English
IMPORTANT SAFETY INSTRUCTIONS
 Make sure all guards, straps, deflectors and handles are
properly and securely attached.
 Use only the manufacturer’s replacement string in the
cutting head. Do not use any other cutting attachment,
for example, metal wire, rope, or the like. To install any
other brand of cutting head to this string trimmer can
result in serious personal injury.
Never operate unit without the grass deflector in place
and in good condition.
 Maintain a firm grip on both handles while trimming. Keep
string head below waist level. Never cut with the string
head located over 30 in. or more above the ground.
Store idle appliances indoors - When not in use, string
trimmer should be stored indoors in a dry, locked place
out of the reach of children.
Never use blades, flailing devices, wire or rope. Unit
is designed for line trimmer use only. Use of any other
accessories or attachments will increase the risk of
injury.
Inspect area to be cut. Remove objects (rocks, broken
glass, nails, wire, string, etc.) which can be thrown or
become entangled in cutting head.
Keep the air vents clean and free of debris to avoid
overheating the motor. Clean after each use.
Stop the unit and disconnect the power source when not
in use. Carry the unit with the motor stopped.
Store out of the reach of children.
Do not hang unit so that the switch trigger is
depressed.
Battery tools do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition.
Be aware of possible hazards when not using your battery
tool or when changing accessories. Following this rule will
reduce the risk of electric shock, fire, or serious personal
injury.
 Do not charge battery tool in rain, or damp or wet location.
Following this rule will reduce the risk of electric shock.
 Do not use battery-operated appliance in rain.
 Remove or disconnect battery before servicing, cleaning
or removing material from the gardening appliance.
 Use battery only with charger listed. For use with 24V
lithium-ion battery packs. See Tool/Appliance/Battery
Pack/Charger Correlation Supplement 988000-446.
 Do not dispose of the batteries in a fire. The cell may
explode. Check with local codes for possible special
disposal instructions.
 Do not open or mutilate the batteries. Released electrolyte
is corrosive and may cause damage to the eyes or skin.
It may be toxic if swallowed.
Do not place battery tools or their batteries near fire or
heat. This will reduce the risk of explosion and possibly
injury.
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
 Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped or
received a sharp blow. A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged
battery immediately.
 Exercise care in handling batteries in order not to short the
battery with conducting materials such as rings, bracelets,
and keys. The battery or conductor may overheat and
cause burns.
For best results, your battery tool should be charged in
a location where the temperature is more than 50&deg;F but
less than 100&deg;F. To reduce the risk of serious personal
injury, do not store outside or in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid gets
into your eyes, flush them with clean water for at least
10 minutes, then seek immediate medical attention.
Following this rule will reduce the risk of serious personal
injury.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this power tool.
If you loan someone this power tool, loan them these
instructions also.
4 — English
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
notice:
(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
Safety Alert
Indicates a potential personal injury hazard.
Read Operator’s
Manual
To reduce the risk of injury, user must read and understand operator’s
manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Wet Conditions Alert
Do not expose to rain or use in damp locations.
Keep Bystanders
Away
Keep all bystanders at least 50 ft. away.
Ricochet
Thrown objects can ricochet and result in personal injury or property
damage.
No Blade
Do not install or use any type of blade on a product displaying this
symbol.
Recycle Symbol
This product uses lithium-ion (Li-ion) batteries. Local, state, or federal
laws may prohibit disposal of batteries in ordinary trash. Consult your
local waste authority for information r&shy; egarding available recycling and/
or disposal options.
Direct Current
Type or a characteristic of current
No Load Speed
Rotational speed, at no load
Per Minute
Revolutions, strokes, surface speed, orbits etc., per minute
V
Volts
Voltage
Hz
Hertz
Frequency (cycles per second)
min
Minutes
Time
no
.../min
5 — English
FEATURES
PRODUCT SPECIFICATIONS
Motor....................................................................... 24 V DC
Adjustable Cutting Swath.................................11 in. / 13 in.
Line Size..................................................................0.065 in.
Weight (without battery pack).......................................6 lbs.
Replacement Spool Part Number.........................AC14RSL
Replacement Spool Cap Part Number................... AC14HC
KNOW YOUR STRING TRIMMER
Grass deflector
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
The trimmer includes a grass deflector and flower bed guard
that helps protect from flying debris.
adjustable FRONT HANDLE
The front handle assembly can be adjusted for ease of
operation and to help prevent loss of control, and can be
positioned above or below the coupler.
EdGER wheel
HANDLE overmold
Handle overmold provides added user comfort.
LOCK-out BUTTON
The lock-out button prevents accidental starting.
ROTATING TRIMMER HEAD
The rotating trimmer head can be locked in two different
positions for ease of use when edging and trimming.
The edger wheel allows for more stable cutting performance
while edging.
ASSEMBLY
UNPACKING
PACKING LIST
This product requires assembly.
String Trimmer/Edger Attachment
Power head
Grass Deflector Assembly
Operator’s Manual
n Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
n Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
n Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
n If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
6 — English
ASSEMBLY
WARNING:
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
TOOLS NEEDED
Failure to secure the string trimmer/edger attachment and
power head as instructed above could result in serious
injury or death.
ATTACHING GRASS DEFLECTOR
See Figure 2.
See Figures 4 - 5.
The following tools (not included or drawn to scale) are
needed for assembly:
Phillips screwdriver
Assembling the tool
See Figure 3.
n Insert the plug on the string trimmer/edger attachment
into the opening on the power head. Make sure the plug
is fully seated.
n Slide the threaded coupler onto the threaded base and
turn the coupler clockwise. Tighten securely.
NOTE: Once assembled correctly, the string trimmer/edger
attachment and power head should not separate when pulled.
Repeat above steps if pieces can be separated.
WARNING:
The line cut-off blade on the grass deflector is sharp.
Avoid contact with the blade. Failure to avoid contact
can result in serious personal injury.
 Remove supplied screws with a phillips screwdriver from
the motor housing.
 Fit the grass deflector into the slots on trimmer head.
Turn counterclockwise to lock grass deflector into
place.
 Line up the screw holes in the grass deflector with the
holes in the motor housing.
 Install supplied screws and tighten by turning clockwise
with a phillips screwdriver.
OPERATION
WARNING:
Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
This product will accept Ryobi 24 V battery packs.
For complete charging instructions, refer to the Operator’s
Manuals for your Ryobi battery pack and charger models.
NOTE: To avoid serious personal injury, always remove the
battery pack and keep hands clear of the lock-out button
when carrying or transporting the tool.
tO INSTALL BATTERY PACK
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
See Figure 6.
 Insert the battery pack into the product as shown.
 Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured before
beginning operation.
TO REMOVE BATTERY PACK
WARNING:
Never use blades, flailing devices, wire, or rope on this
product. Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
See Figure 6.
 Depress the latches on each side of the battery pack.
 Remove the battery pack.
7 — English
OPERATION
Starting/stopping the string trimmer
See Figure 7.
To start:
 Press and hold the lock-out button.
 Depress the switch trigger.
 Release the lock-out button. Continue to depress the
switch trigger for extended operation.
To stop:
 Release the switch trigger to stop the string trimmer.
 Upon release of the switch trigger, the lock-out button
will automatically reset to the locked position.
ADJUSTABLE FRONT HANDLE
See Figure 8.
The angle of the front handle can be adjusted 180&deg;.
 Remove the battery pack.
 Set the trimmer on a flat surface and turn the knob counterclockwise to loosen the handle.
 For trimming, adjust the handle upward.
 For edging, adjust the handle downward.
 Turn the knob clockwise until the handle is securely
tightened before reinstalling the battery pack.
OPERATING THE TRIMMER
See Figure 9.
Follow these tips when using the string trimmer:
Hold the trimmer with your right hand on the rear handle
and your left hand on the front handle.
Keep a firm grip with both hands while in operation.
Trimmer should be held at a comfortable position with the
rear handle about hip height.
Cut tall grass from the top down. This will prevent grass
from wrapping around the boom housing and string head
which may cause damage from overheating.
If grass becomes wrapped around the string head:
Remove the battery pack from the trimmer.
Remove the grass.
WARNING:
 Use the tip of the string to do the cutting; do not force
string head into uncut grass.
 Wire and picket fences cause extra string wear, even
breakage. Stone and brick walls, curbs, and wood may
wear string rapidly.
 Avoid trees and shrubs. Tree bark, wood moldings, siding,
and fence posts can easily be damaged by the string.
 The flower bed guide provides the user with the cutting
swath of the strong to help prevent cutting damage to
flowers and scrubs.
ADVANCING line
NOTE: The trimmer is equipped with an auto-feed head.
Bumping the head to try to advance the line will damage
the trimmer and void the warranty.
 With the trimmer running, release the switch trigger.
 Wait two seconds, and press the switch trigger.
NOTE: The string will extend approximately 1/4 in. with
each stop and start of the switch trigger until the string
reaches the length of the grass deflector cut-off blade.
 Resume trimming.
ADVANCING THE line MANUALLY
See Figure 12.
Remove the battery pack.
Push the black button located on the string head while
pulling on string to manually advance the string.
LINE CUT-OFF BLADE
See Figure 13.
This trimmer is equipped with a line cut-off blade on the grass
deflector. For best cutting, advance line until it is trimmed to
length by the line cut-off blade. Advance line whenever you
hear the engine running faster than normal, or when trimming
efficiency diminishes. This will maintain best performance
and keep line long enough to advance properly.
This trimmer is currently set at the 11 in. cutting swath. To
adjust to a cutting swath of 13 in.:
Loosen the blade screw then rotate the blade 180&deg;.
Tighten the blade screw.
edging
Always hold the string trimmer away from the body
keeping clearance between the body and the string
trimmer. Any contact with the string trimmer cutting head
while operating can result in serious personal injury.
CUTTING TIPS
See Figures 10 - 11.
Keep the trimmer tilted toward the area being cut; this is
the best cutting area.
The string trimmer cuts when passing the unit from right
to left. This will avoid throwing debris at the operator.
Avoid cutting in the dangerous area shown in figure 10.
See Figures 14 - 15.
Remove the battery pack.
Step down on the foot pedal.
Rotate the trimmer head counterclockwise placing the
tool in the edger position.
WARNING:
Always hold the string trimmer away from the body keeping clearance between the body and the string trimmer.
Any contact with the string trimmer cutting head while
operating can result in serious personal injury.
8 — English
MAINTENANCE
SPOOL REPLACEMENT
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or performing
any maintenance.
GENERAL MAINTENANCE
Before each use, inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps, etc.
Tighten securely all fasteners and caps and do not operate
this product until all missing or damaged parts are replaced.
Please call 1-800-860-4050 or contact an authorized service
center for assistance.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal injury.
See Figure 16.
Use only round type .065 in. diameter monofilament line.
Use original manufacturer’s replacement string for best
performance.
 Remove the battery pack.
 Push in tabs on side of spool retainer.
 Pull spool retainer up to remove.
 Remove the old spool.
 To install the new spool, make sure the string is captured
in the slot on the new spool. Make sure the end of the
string is extended approximately 6 in. beyond the slot.
 Install the new spool so that the line and slot align with
the eyelet in the line head. Thread the line into the eyelet.
 Pull the string extending from the line head so the line
releases from the slot in the spool.
 Reinstall the spool retainer by depressing tabs into slots
and pushing down until spool retainer clicks into place.
line REPLACEMENT
See Figures 16 - 17.
 Remove the battery pack.
 Remove the spool from the line head.
NOTE: Remove any old line remaining on the spool.
 Cut a piece of line approximately 9 ft. long. Use only .065
in. diameter monofilament line.
 Insert the line into the anchor hole in the upper part of the
spool. Wind the line around the clockwise, as shown by
the arrows on the spool. Place line in the slot on upper
spool flange, leaving about 6 in. extended beyond the
slot. Do not overfill. After winding the line, there should
be at least 1/4 in. between the wound line and the outside
edge of the spool.
 Replace the plastic retainer, spool, and the spool retainer.
Refer to Spool Replacement earlier in this manual.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at an Authorized Service Center.
STORing the trimmer
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
 Clean all foreign material from the trimmer.
 Remove the battery pack from the string trimmer before
storing.
 Store it in a place that is inaccessible to children.
 Keep away from corrosive agents such as garden
chemicals and de-icing salts.
WARNING:
Upon removal, cover the battery pack’s terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its components. Lithium-ion batteries must be recycled or disposed
of properly. Also, never touch both terminals with metal
objects and/or body parts as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
Replacement Spool Part Number.........................AC14RSL
Replacement Spool Cap Part Number................... AC14HC
9 — English
TROUBLESHOOTING
PROBLEM
Line will not advance when using
the auto-feed head:
POSSIBLE CAUSE
SOLUTION
Line is welded to itself.
Lubricate with silicone spray.
Not enough line on spool.
Install more line. Refer to Line Replacement
earlier in this manual.
Line is worn too short.
Pull line while pressing button.
Line is tangled on spool.
Remove line from spool and rewind. Refer to
Line Replacement earlier in this manual.
Grass wraps around boom
housing and line head
Cutting tall grass at ground
level.
Cut tall grass from the top down to prevent
wrapping.
Motor fails to start when switch
trigger is depressed.
Battery is not secure.
To secure the battery pack, make sure the
latches on each side of the battery pack snap
into place.
Battery is not charged.
Charge the battery pack according to the
instructions included with your model.
CALL US FIRST
For any questions about operating or maintaining your product,
call the Ryobi&reg; Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
10 — English
WARRANTY
LIMITED WARRANTY STATEMENT
Techtronic Industries North America, Inc., warrants to the
original retail purchaser that this Ryobi&reg; brand outdoor
product is free from defect in material and workmanship
and agrees to repair or replace, at Techtronic Industries
North America, Inc.’s, discretion, any defective product
free of charge within these time periods from the date of
purchase.
 Three years if the product is used for personal, family
or household use;
90 days, if used for any other purpose, such as
commercial or rental.
This warranty extends to the original retail purchaser
only and commences on the date of the original retail
purchase.
Any part of this product found in the reasonable judgment
of Techtronic Industries North America, Inc. to be defective
in material or workmanship will be repaired or replaced
without charge for parts and labor by an authorized service
center for RYOBI&reg; brand outdoor products (Authorized
Ryobi Service Center).
The product, including any defective part, must be returned
to an authorized Ryobi service center within the warranty
period. The expense of delivering the product to the service
center for warranty work and the expense of returning it
back to the owner after repair or replacement will be paid
by the owner. Techtronic Industries North America, Inc.’s,
responsibility in respect to claims is limited to making the
required repairs or replacements and no claim of breach of
warranty shall be cause for cancellation or rescission of the
contract of sale of any Ryobi&reg; brand outdoor product. Proof
of purchase will be required by the dealer to substantiate
any warranty claim. All warranty work must be performed
by an authorized service dealer.
This warranty is limited to ninety (90) days from the date
of original retail purchase for any Ryobi&reg; brand outdoor
product that is used for rental or commercial purposes, or
any other income-producing purpose.
This warranty does not cover any product that has been
subject to misuse, neglect, negligence, or accident, or that
has been operated in any way contrary to the operating
instructions as specified in this operator’s manual. This
warranty does not apply to any damage to the product that
is the result of improper maintenance or to any product
that has been altered or modified. The warranty does not
extend to repairs made necessary by normal wear or by the
use of parts or accessories which are either incompatible
with the ryobi&reg; brand outdoor product or adversely affect
its operation, performance, or durability. In addition, this
warranty does not cover:
A.Tune-ups – Spark Plugs, Carburetor, Carburetor
Adjustments, Ignition, Filters
B. Wear items – Bump Knobs, Outer Spools, Cutting
Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive
Belts, Tines, Felt Washers, Hitch Pins, Mulching Blades,
Blower Fans, Blower and Vacuum Tubes, Vacuum Bag
and Straps, Guide Bars, Saw Chains
Techtronic Industries North America, Inc., reserves the
right to change or improve the design of any Ryobi&reg; brand
outdoor product without assuming any obligation to modify
any product previously manufactured.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE STATED WARRANTY PERIOD. ACCORDINGLY,
ANY SUCH IMPLIED WARRANTIES INCLUDING
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR OTHERWISE, ARE DISCLAIMED
IN THEIR ENTIRETY AFTER THE EXPIRATION OF
THE APPROPRIATE three-YEAR OR NINETY-DAY
WARRANTY PERIOD. Techtronic Industries
North America, Inc.’s, OBLIGATION UNDER THIS
WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO
THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS
AND Techtronic Industries North America,
Inc., DOES NOT ASSUME OR AUTHORIZE ANYONE
TO ASSUME FOR THEM ANY OTHER OBLIGATION.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. Techtronic
Industries North America, Inc., ASSUMES NO
RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL,
OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED
TO, EXPENSE OF RETURNING THE PRODUCT TO AN
AUTHORIZED ryobi SERVICE center AND EXPENSE
OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S
TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES,
RENTAL OF A LIKE PRODUCT DURING THE TIME
WARRANTY SERVICE IS BEING PERFORMED, TRAVEL,
LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS
OF REVENUE, LOSS OF USE OF THE PRODUCT, LOSS
OF TIME, OR INCONVENIENCE. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
This warranty applies to all Ryobi&reg; brand outdoor products
manufactured by or for Techtronic Industries North America,
Inc., and sold in the United States and Canada.
To locate your nearest Authorized Ryobi Service Center,
dial 1-800-860-4050.
11 — English
SYMBOLE
SIGNAL
SIGNIFICATION
DANGER:
AVERTISSEMENT :
ATTENTION :
avis :
SYMBOLE
NOM
D&Eacute;SIGNATION / EXPLICATION
Danger de ricochet
Par minute
V
Volts
Tension
Hz
Hertz
min
Minutes
Temps
no
.../min
VEILLER &Agrave; BIEN CONNA&Icirc;TRE LA TONDEUSE
&Agrave; FOUET
ASSEMBLAGE
D&Eacute;BALLAGE
LISTE DE CONTR&Ocirc;LE
ASSEMBLAGE
AVERTISSEMENT :
AVERTISSEMENT :
FIXATION DU D&Eacute;FLECTEUR D’HERBE
AVERTISSEMENT :
INSTALACI&Oacute;N DEL Pile
DESMONTAJE DEL Pile
MISE EN MARCHE ET ARR&Ecirc;T DE LA TONDEUSE
&Agrave; FOUET
POIGN&Eacute;E AVANT R&Eacute;GLABLE
Voir la figure 8.
UTILISATION DE LA TONDEUSE &Agrave; FOUET
CONSEILS
AVANCE MANUELLE DU ligne
ENTRETIEN
REMPLACEMENT DE LA BOBINE
AVERTISSEMENT :
POSSIBLE CAUSE
SOLUTION
’AIDE?
BESOIN D
APPELER LE
50
1-800-860-40
m
ols.co
yobito
www.r
NOTES
S&Iacute;MBOLO
SE&Ntilde;AL
SIGNIFICADO
PELIGRO:
ADVERTENCIA:
PRECAUCI&Oacute;N:
aviso:
S&Iacute;MBOLO
no
.../min
NOMBRE
DENOMINACI&Oacute;N/EXPLICACI&Oacute;N
Alerta de seguridad
Rebote
No instale hoja de
corte
Corriente continua
Por minuto
V
Volts
Voltaje
Hz
Hertz
min
Minutos
Tiempo
Motor.............................................................................4 V c.c.
Ancho de corte (ajuste)....279 mm/330 mm (11 pulg./13 pulg.)
Di&aacute;metro del hilo.................................... 1,65 mm (0,065 pulg.)
FAMILIAR&Iacute;CESE CON SU RECORTADORA DE
HILO
ARMADO
ADVERTENCIA:
ADVERTENCIA :
INSTALACI&Oacute;N DEL PAQUETE DE BATER&Iacute;AS
MANEJO DE LA RECORTADORA
Vea la figura 9.
RECOMENDACIONES DE CORTE
AVANCE DEL ligne
AVANCE MANUAL DEL ligne
MANTENIMIENTO
REEMPLAZO DEL CARRETE
REEMPLAZO DEL HILO
POSSIBLE CAUSE
SOLUTION
A AYUDA?
&iquest;NECESIT
050
1-800-860-4
LLAME AL
m
ols.co
yobito
www.r
NOTAS
OPERATOR’S MANUAL
MANUEL D’UTILISATION / MANUAL DEL OPERADOR
RY24000 24 Volt Power head with
RY24020 string trimmer / edger attachment
RY24000 24 V bloc moteur avec RY24020 accessoire de taillebordures &agrave; ligne/coupe-bordures
RY24000 24 V cabezal motor con RY24020 accesorio de
recortadoras de hilo/recortadora de bordes
California Proposition 65
WARNING:
This product, its exhaust, and other substances that may become airborne from
its use may contain chemicals, including
lead, known to the State of California
to cause cancer, birth defects, or other
reproductive harm. Wash hands after
handling.
• Parts and Service
Prior to requesting service or purchasing replacement parts, please obtain your model
and serial number from the product data plate.
• MODEL NO._ ______________________SERIAL NO.___________________________
• How to obtain Replacement Parts:
Replacement parts can be purchased online at www.ryobitools.com or by calling
1-800-860-4050. Replacement parts can also be obtained at one of our Authorized
Service Centers.
• How to locate an Authorized Service Center:
Authorized Service Centers can be located online at www.ryobitools.com or by calling 1-800-860-4050.
• How to obtain Customer or Technical Support:
To obtain Customer or Technical Support please contact us at 1-800-860-4050.
RYOBI is a registered trademark of Ryobi
Limited and is used pursuant to a license
granted by Ryobi Limited.
• C&Oacute;MO OBTENER SERVICIO O ASISTENCIA T&Eacute;CNICA AL CONSUMIDOR:
Para obtener Servicio o Asistencia T&eacute;cnica al Consumidor, s&iacute;rvase comunicarse con
nosotros llamando al 1-800-860-4050.
988000-396
4-11-12 (REV:03)
TECHTRONIC INDUSTRIES NORTH AMERICA, INC.
1428 Pearman Dairy Road, Anderson, SC 29625 USA
1-800-860-4050 • www.ryobitools.com
A subsidiary
of Techtronic Industries Co., Ltd. • OTC: TTNDY
12 — English">

Ciao! Sono un chatbot AI specificamente addestrato per assisterti con il Ryobi RY24020 string trimmer / edger attachment Manuale dell'operatore. Ho esaminato attentamente il documento e posso aiutarti a individuare le informazioni di cui hai bisogno o spiegare il contenuto in termini chiari e semplici. Che tu stia cercando indicazioni su funzionalità specifiche, passaggi per la risoluzione dei problemi o l'uso generale, non esitare a fare domande. Più dettagli fornisci sulle tue esigenze o dubbi, più accuratamente e efficacemente potrò aiutarti!

L''assistente sta scrivendo

L''assistente non è disponibile. Riprova più tardi.

Indice dei contenuti

Sembra che tu sia arrivato a un documento scritto in più lingue, inclusa una che non è la tua lingua madre. Puoi utilizzare i seguenti collegamenti per nascondere temporaneamente le pagine senza la lingua che preferisci.