Dolmar PM-5365 S3 pro, PM-5360 S3, PM-5360 S3E Owner's manual

Návod k použití
Instrukcje obsługi
Használati utasítás
êÛÍÓ‚Ó‰ÒÚ‚Ó Ò ËÌÒÚÛ͈ËflÏË
Priručnik za uporabo
Priročnik za uporabo
Návod na použitie
Manual de instrucfiiuni
Instrukcij vadovas
Operatora rokasgrÇmat
Kasutusjuhend
Priručnik sa uputstvima
Betriebsanleitung
Manuel d’utilisation
Operator’s manual
Manuale di istruzioni
Gebruikershandleiding
Manual de instrucciones
Manual de instruções
√‰ËÁ›Â˜ ÃÚ‹Û˘
Kullanim kilavuzu
Bruksanvisning
Brugsanvisning
Käyttöohjeet
60
PM-5360 S3
PM-5360 S3E
PM-5365 S3 pro
http://www.dolmar.com
MP04
D
F
GB
ITALIANO ......................................
I
NL
E
PORTUGUÊS.................................
P
∂££∏¡π∫∞ ...................................
GR
TR
S
DANSK .........................................
DK
SUOMI ..........................................
FIN
ČESKY ..........................................
CZ
POLSKI..........................................
PO
MAGYAR .......................................
HU
RU
HR
SLO
SK
ROMÂN .........................................
RO
LT
LV
EESTI ............................................
EE
CS
3
1.1
4
5
4
4
5
8
5
6
7
1
2
3
1.2
12
11
11
13
5-7 mm
15
12 15
16
14
15
15
1.3
4
15
16
11
15
14
2.1
1
2.2
2.5
1
2.4
2.3
1
1
1
3.1
1
3.3
2
1
3.2
3.4
1
2
2
1
3
3
4.1
4.2
4.3
2
6 mm
1
1
4
2
3
1
4.4
1
1 - 35-40 Nm
1 - 40-45 Nm
2
5
6
4
1
18
17
LWA
19
dB
kg
S/N
3
5
2
16
14 15
11 13 12
21
41
22
23
24
25
42
26
43
28
29
30
44
6
27
2.
3.
4.
5.
6.
GB
IDENTIFICATION LABEL AND MACHINE COMPONENTS
1.
Acoustic power level according to EEC directive
2000/14/CE
Mark of conformity according to EEC directive 98/37
Year of manufacture
Lawnmower type
Serial number
Name and address of Manufacturer
2.
3.
4.
5.
6.
11. Chassis 12. Engine 13. Blade 14. Stone-guard 15.
Grass-catcher 16. Handle 17. Throttle control 18. Engine
brake lever 19. Drive engagement lever
DESCRIPTION OF THE SYMBOLS SHOWN ON THE CONTROLS (where present)
21. Slow 22. Fast 23. Choke 24. Engine stop 25.
Transmission engaged 26. Off 27. Start 28. Speed «1» 29.
Speed «2» 30. Speed «3»
SAFETY REQUIREMENTS - Your lawnmower should be used
with due care and attention. Symbols have therefore been
placed on various parts of the machine to remind you of the
main precautions to be taken. Their full meanings are explained
later on. You are also asked to carefully read the safety regulations in the applicable chapter of this handbook.
41. Important: Read the instruction handbook before using
the machine.
42. Danger of thrown objects. Keep other people at a safe
distance whilst working.
43. Warning: Remove the spark plug lead and read instructions before carrying out any repair or maintenance.
44. Danger of cutting. Blades in movement. Do not put hands
or feet near the blades.
I
ETICHETTA DI IDENTIFICAZIONE E COMPONENTI DELLA
MACCHINA
1.
2.
3.
4.
5.
6.
NL
7
E
ETIQUETA DE IDENTIFICACIÓN Y COMPONENTES DE LA
MÁQUINA
1.
2.
3.
4.
5.
6.
P
ETIQUETA DE IDENTIFICAÇÃO E COMPONENTES DA
MÁQUINA
1.
2.
3.
4.
5.
6.
GR
ETIKETA ¶PO™¢IOPI™MOY ∫∞π ∂•∞ƒ∆∏ª∞∆ø¡ TOY
MHXANHMATO™
1.
2.
3.
4.
5.
6.
8
1.
2.
3.
4.
5.
6.
FIN
TUNNUSLAATTA JA LAITTEENOSAT
2.
1.
3.
4.
5.
6.
9
CZ
IDENTIFIKAČNĺ ŠTĺTEK A SOUČÁSTI STROJE
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
PO
TABLICZKA IDENTYFIKACYJNA I WYKAZ SKŁADNIKÓW
MASZYNY
1.
2.
3.
4.
5.
6.
RU
àÑÖçíàîàKÄñàéççõâ üêãõK à ëéëíÄÇçõÖ óÄëíà
åÄòàçõ
1.
2.
3.
4.
5.
6.
10
11. ò‡ÒÒË 12. Ñ‚Ë„‡ÚÂθ 13. çÓÊ 14. ᇢËÚ‡ ÓÚ Í‡ÏÌÂÈ
15. ë·ÓÌ˚È Ï¯ÓÍ 16. êÛÍÓflÚ͇ 17. ÄÍÒÂÎÂ‡ÚÓ 18.
19. ê˚˜‡„ ÒˆÂÔÎÂÌËfl
íÓÏÓÁÌÓÈ ˚˜‡„ ‰‚Ë„‡ÚÂÎfl
Úfl„Ó‚Ó„Ó ‡„„‡Ú‡
éèàëÄçàÖ éÅéáçÄóÖçàâ, àåÖûôàïëü çÄ êõóÄÉÄï
ìèêÄÇãÖçàü („‰Â Ô‰ÛÒÏÓÚÂÌÓ)
21. å‰ÎÂÌÌÓ 22. Å˚ÒÚÓ 23. ëÚ‡ÚÂ 24. Ç˚Íβ˜ÂÌËÂ
‰‚Ë„‡ÚÂÎfl 25. ífl„‡ ÔÓ‰Íβ˜Â̇ 26. Ç˚Íβ˜ÂÌË 27.
èÛÒÍ 28. ëÍÓÓÚ¸ «1» 29. ëÍÓÓÚ¸ «2» 30. ëÍÓÓÚ¸ «3»
èêÄÇàãÄ ÅÖáéèÄëçéëíà - èË ÔÓθÁÓ‚‡ÌËË
„‡ÁÓÌÓÍÓÒËÎÍÓÈ ÒΉÛÂÚ Òӷβ‰‡Ú¸ ÓÒÚÓÓÊÌÓÒÚ¸. ë ˝ÚÓÈ
ˆÂθ˛ ̇ χ¯ËÌ ËϲÚÒfl Ú‡·Î˘ÍË Ò ËÒÛÌ͇ÏË,
̇ÔÓÏË̇˛˘ËÏË
Ó·
ÓÒÌÓ‚Ì˚ı
Ô‡‚Ë·ı
Ô‰ÓÒÚÓÓÊÌÓÒÚË. àı Á̇˜ÂÌË ÔÓflÒÌflÂÚÒfl ÌËÊÂ. KÓÏÂ
ÚÓ„Ó, ÂÍÓÏẨÛÂÏ ‚ÌËχÚÂθÌÓ ÓÁ̇ÍÓÏËÚ¸Òfl Ò
Ô‡‚Ë·ÏË ÚÂıÌËÍË ·ÂÁÓÔ‡ÒÌÓÒÚË, ËÁÎÓÊÂÌÌ˚ÏË ‚
ÓÚ‰ÂθÌÓÈ „·‚ ‰‡ÌÌÓ„Ó ÛÍÓ‚Ó‰ÒÚ‚‡.
41. ÇÌËχÌËÂ: éÁ̇ÍÓÏËÚ¸Òfl Ò ËÌÒÚÛ͈ËflÏË ‰Ó ÚÓ„Ó, ͇Í
ÔÓθÁÓ‚‡Ú¸Òfl „‡ÁÓÌÓÍÓÒËÎÍÓÈ.
42. éÔ‡ÒÌÓÒÚ¸ ‚˚·ÓÒÓ‚. èË ÔÓθÁÓ‚‡ÌËË Û‰‡ÎËÚ¸ β‰ÂÈ
ËÁ ‡·Ó˜ÂÈ ÁÓÌ˚.
43. ÇÌËχÌËÂ: éÚÒÓ‰ËÌËÚ¸ ÍÓÎÔ‡˜ÓÍ Ò‚Â˜Ë Ë ÔÓ˜ÂÒÚ¸
ËÌÒÚÛ͈ËË ‰Ó ‚˚ÔÓÎÌÂÌËfl ͇ÍËı-ÎË·Ó ÓÔÂ‡ˆËÈ ÔÓ
ÚÂıÓ·ÒÎÛÊË‚‡Ì˲ ËÎË ÂÏÓÌÚÛ.
44. ÇÌËχÌËÂ: éÔ‡ÒÌÓÒÚ¸ ÔÓÂÁÓ‚. Ñ‚ËÊÛ˘ËÂÒfl ÌÓÊË. çÂ
‚ÒÚ‡‚ÎflÚ¸ ÛÍË ËÎË ÌÓ„Ë ‚ÌÛÚ¸ ‚˚ÂÏÍË ‰Îfl ÌÓÊÂÈ..
SLO
IDENTIFIKACIJSKA NALEPKA IN SESTAVNI DELI STROJA
1.
2.
3.
4.
5.
6.
SK
HR
IDENTIFIKACIJSKA PLOČICA I SASTAVNI DIJELOVI
STROJA
1.
2.
3.
4.
5.
6.
IDENTIFIKAČNÝ ŠTĺTOK A SÚČASTI STROJA
1.
2.
3.
4.
5.
6.
NA
11
RO
ETICHETA DE IDENTIFICARE ȘI COMPONENTELE MAȘINII
1.
2.
3.
4.
5.
6.
LT
IDENTIFIKACIJOS ETIKETñ IR ØRENGINIO KOMPONENTAI
1.
2.
3.
4.
5.
6.
PAVAIZDUOT
12
CS
IDENTIFIKACIJSKA ETIKETA I SASTAVNI DELOVI MAŠINE
1.
2.
3.
4.
5.
6.
13
MIT SORGFALT BEACHTEN
14
D
F
16
F
GB SAFETY REGULATIONS
TO BE FOLLOWED CAREFULLY
A) TRAINING
1) Read the instructions carefully. Get familiar with the controls
and proper use of the equipment. Learn how to stop the engine
quickly.
2) Only use the lawnmower for the purpose for which it was
designed, i.e. for cutting and collecting grass. Any other use can
be hazardous, causing damage to the machine.
3) Never allow children or people unfamiliar with these instructions
to use the lawnmower. Local regulations may restrict the age of the
operator.
4) Never use the lawnmower:
– When people, especially children, or pets are nearby.
– If the operator has taken medicine or substances that can affect
his ability to react and concentrate.
5) Remember that the operator or user is responsible for accidents
or hazards occurring to other people or their property.
B) PREPARATION
1) While mowing, always wear sturdy footwear and long
trousers. Do not operate the equipment when barefoot or wearing open sandals.
2) Thoroughly inspect the area where the equipment is to be used
and remove all objects which may be thrown by the machine or
damage the cutter assembly and the engine (stones, sticks, metal
wire, bones, etc.)
3) WARNING: DANGER! Engine fuel is highly flammable:
– Store fuel in containers specifically designed for this purpose.
– Refuel using a funnel and outdoors only. Do not smoke while
refuelling or whenever handling the fuel.
– Add fuel before starting the engine. Never remove the cap of the
fuel tank or add fuel while the engine is running or when the engine
is hot.
– If fuel is spilled, do not attempt to start the engine but move the
machine away from the area of spillage and avoid creating any
source of ignition until the fuel has evaporated and the vapour dispersed.
– Replace all fuel tanks and containers caps securely.
4) Substitute faulty silencers.
5) Before use, always inspect the machine, especially the condition of the blades, and check that the screws and cutting
assembly are not worn or damaged. Replace worn or damaged
blades and screws in sets to preserve balance.
6) Before mowing, attach the discharge opening guards (grasscatcher or stone-guard).
C) OPERATION
1) Do not operate the engine in a confined space where dangerous
carbon monoxide fumes can collect.
2) Mow only in daylight or good artificial light.
3) If possible, avoid operating the equipment in wet grass.
4) Always be sure of your footing on slopes.
5) Walk, never run and do not allow yourself to be pulled along by
the lawnmower.
6) Mow across the face of slopes, never up and down.
7) Exercise extreme caution when changing direction on slopes.
8) Do not mow on slopes of more than 20°.
9) Exercise extreme caution when pulling the lawnmower towards
you.
10) Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawnmower to and from the area to be mowed.
11) Never operate the lawnmower with defective guards, or without
18
safety devices, such as the stone-guard and/or grass-catcher, in
place.
12) Do not change the engine governor settings or overspeed the
engine.
13) On power-driven models, disengage the drive clutch before
starting the engine.
14) Start the engine carefully, following the instructions and keeping
feet well away from the blade.
15) Do not tilt the lawnmower when starting the engine. Start the
engine on a flat surface that is free of obstacles and tall grass.
16) Do not put hands or feet near or under rotating parts. Keep
clear of the discharge opening at all times.
17) Never pick up or carry a lawnmower while the engine is running.
18) Stop the engine and disconnect the spark plug wire:
– Before carrying out any work underneath the cutting deck or
before unclogging the chute;
– Before checking, cleaning or working on lawnmower;
– After striking a foreign object. Inspect the lawnmower for damage
and make repairs before restarting and operating the lawnmower;
– If the lawnmower starts to vibrate abnormally (find and remove
the cause of the vibration immediately).
19) Stop the engine:
– Whenever you leave the lawnmower unattended. Remove the key
from models with electric starters.
– Before refuelling.
– Every time you remove or replace the grass-catcher.
– Before adjusting the grass cutting height.
20) Reduce the throttle before turning off the engine and turn the
fuel off when you have finished mowing, following the instructions
in the engine handbook.
21) When mowing, always keep to a safe distance from the rotating
blade. This distance is the length of the handle.
D) MAINTENANCE AND STORAGE
1) Keep all nuts, bolts and screws tight to be sure the equipment is
in safe working condition. Regular maintenance is essential for
safety and performance.
2) Never store the equipment with fuel in the tank inside a building
where vapour may reach a flame or a spark or a source of extreme
heat.
3) Allow the engine to cool before storing in an enclosed space.
4) To reduce the fire hazard, keep the engine, exhaust silencer,
battery compartment and fuel storage area free of grass,
leaves, or excessive grease. Do not leave containers with grass
cuttings in rooms.
5) Check the stone-guard and grass-catcher frequently for wear
and deterioration.
6) If the fuel tank has to be drained, this should be done outdoors
and when the engine is cool.
7) Wear strong work gloves when removing and reassembling the
blade.
8) Keep the blade balanced during sharpening. All operations on
the blade (dismantling, sharpening, balancing, remounting and/or
replacing) require a certain familiarity and special tools. For safety
reasons, these jobs are best carried out at a specialized centre.
9) For reasons of safety, do not use the equipment with worn or
damaged parts. Parts are to be replaced and not repaired. Use
genuine spare parts (blades should always bear the symbol
). Parts that are not of the same quality can damage the equipment and be dangerous for your safety.
E) TRANSPORTATION AND HANDLING
1) Whenever the machine is to be handled, raised, transported or
tilted you must:
– wear strong working gloves;
– grasp the machine at the points that offer a safe grip, taking
account of the weight and its distribution.
– use an appropriate number of people for the weight of the
machine and the characteristics of the vehicle or the place where it
has to be placed or collected.
GB STANDARDS OF USE
For instructions regarding the engine and the battery (if
supplied), read the relevant manuals.
1. FINISH ASSEMBLY
NOTE – The machine can be supplied with some of the
components already fitted.
1.1 Bring the handle (1) back to its operating position
and secure it with the thumb knobs (2).
The handle (1) can be height-adjusted in three different
positions by loosening the thumb knobs (2) and inserting
the pins (3) in one of the three pairs of holes on the brackets. Tighten the thumb knobs (2) securely after adjustment.
Fit the starter rope (4-if provided) in the guide (5) and tighten the nut (6). Mount the tray (7-if provided) by pushing the
attachments right down until you hear a click.
Unscrew the two knobs on the sides (8) to adjust the grip
and make it as comfortable as possible. Tighten the knobs
(8) after adjustment.
1.2 With the plastic part (11) upside-down, fasten the
frame (12) to the plastic part using the screws (13).
Insert the frame (12) into the sack (14) and attach the plastic profile (15) with the help of a screwdriver, as shown in
the drawing.
Fit the edge of the cloth (16) right into the groove of the
plastic part (11), starting 5-7 mm from the ends.
1.3 On models with an electric starter, connect the battery cable to the lawnmower’s general cable connection.
towards the handle and give a sharp pull on the starter
cable knob (2).
For models with an electric starter, turn the starter key (3).
3.3 The lawn will look better if it is always cut to the
same height and in alternate directions.
3.4 When you have finishing mowing, release the brake
lever (1) and disconnect the spark plug cap (2).
Remove the starter key (3) (where fitted).
WAIT FOR THE BLADE TO STOP before carrying out any
type of work on the machine.
4. ROUTINE MAINTENANCE
IMPORTANT – Regular, careful maintenance is essential for keeping the safety level and original performance of the machine unchanged in time.
Store the lawnmower in a dry place.
1) Wear strong working gloves during any cleaning, maintenance or adjustment operation on the machine.
2) Carefully clean the machines with water after each cut;
remove the grass debris and mud accumulated inside
the chassis to avoid their drying and thus making the
next start-up difficult.
3) Should it be necessary to access the lower part, only tilt
the machine from the side shown in the engine handbook; following the relative instructions.
4) Do not drip petrol onto the plastic parts of the motor or
the machine to prevent damaging them and remove all
traces of spilt petrol immediately. The warranty does not
cover damage to plastic parts caused by petrol.
4.1
2. DESCRIPTION OF CONTROLS
2.1 The throttle (where fitted) is controlled by the lever
(1) and positioned as shown on the relative plate. Some
models have a fixed speed, and therefore no need of a
throttle.
2.2 The blade brake is controlled by the lever (1), which
should be held against the handle when starting and using
the lawnmower.
The engine stops when the lever is released.
2.3 In power-driven models, the lawnmower is moved
forward by pushing the control lever (1) forwards.
To stop moving forward, bring the lever (1) back to neutral.
The lever (1) automatically goes back into neutral when you
release the blade brake lever.
2.4 The speed change (if present) is controlled by the
lever (1), whose positions are shown on the plate.
2.5
The cutting height is adjusted by releasing the lever
(1) and lifting or lowering the chassis to the required position which can be seen through the special opening.
MAKE THIS ADJUSTMENT ONLY WHEN THE BLADE HAS
STOPPED MOVING.
All operations on the blade should be carried out at
a specialized centre.
Note for specialized centres: Reassemble the blade (2) as
shown in the drawing and tighten the central screw (1)
using a torque wrench set to the values specified for each
type of blade.
4.2 In power-driven models:
• adjust the tension of the belt with the nut (1) to get the
right measurement (6 mm).
• turn the adjusting nut (2) so that the wire (3) is slightly
loose and the lever (4) is idle.
4.3 To recharge a flat battery, connect to the battery
charger (1) following the instructions in the battery maintenance handbook.
Do not connect the battery charger directly to the engine
terminal. It is not possible to start the engine using the battery charger as a power source, as it may get damaged.
If the machine is to remain inactive for a long period, disconnect the battery leads after making sure that the battery
is fully charged.
4.4 To clean inside the machine, use the hosepipe connector (1) provided.
Always stand behind the machine's handle when cleaning.
3. GRASS CUTTING
3.1 Lift the stone-guard and attach the grass-catcher
(1) correctly as shown in the drawing.
3.2 To start the engine, follow the instructions in the
engine booklet and then pull the blade brake lever (1)
Should you have any doubts or problems, do not hesitate
to contact the nearest Service Centre or your Sales outlet.
19
I
DA OSSERVARE SCRUPOLOSAMENTE
20
I
1.1
3. TAGLIO DELL’ERBA
3.1
4.4
22
E
QUE SE DEBEN RESPETAR ESCRUPULOSAMENTE
24
E
3.2
P
26
P
NA THPOYNTAI ¶PO™EKTIKA
28
1. TE§EIø™TE TH ™YNAPMO§O°H™H
™∏ª∂πø™∏ - ∆Ô Ì˯¿ÓËÌ· ÌÔÚ› Ó· ‰È·Ù›ıÂÙ·È Ì ÔÚÈṲ̂ӷ
ÂÍ·ÚÙ‹Ì·Ù· ÌÔÓÙ·ÚÈṲ̂ӷ.
2. ¶EPI°PAºH TøN XEIPI™MøN
2.1 TÔ Áο˙È (·Ó ÚԂϤÂÙ·È) ÂϤÁ¯ÂÙ·È ·fi ÙÔ ÌÔ¯Ïfi (1). OÈ
ı¤ÛÂȘ ÙÔ˘ ÌÔ¯ÏÔ‡ Ê·›ÓÔÓÙ·È ÛÙËÓ ·ÓÙ›ÛÙÔÈ¯Ë ÈӷΛ‰·. ™Â
ÌÂÚÈο ÌÔÓ٤Ϸ ÚԂϤÂÙ·È ¤Ó·˜ ÎÈÓËÙ‹Ú·˜ Ì ÛÙ·ÂıÚfi ·ÚÈıÌfi
ÛÙÚÔÊÒÓ, ¯ˆÚ›˜ ·Ó¿ÁÎË Áη˙ÈÔ‡.
3. KO¶H TOY °PA™I¢IOY
™Â ÂÚ›ÙˆÛË Ô˘ ¤¯ÂÙ ·ÌÊÈ‚Ôϛ˜ ‹ οÔÈÔ Úfi‚ÏËÌ·, ÌË
‰ÈÛÙ¿ÛÂÙ ӷ ·¢ı˘Óı›Ù ÛÙÔÓ AÓÙÈÚfiÛˆfi Ì·˜
29
30
2. KONTROL S‹STEM‹N‹N TANIMI
2.1
2.2
S
32
S
ANVÄNDNINGSREGLER
1. AVSLUTA MONTERINGEN
ANMÄRKNING – Maskinen kan levereras med vissa
komponenter redan monterade.
2.2
Byte av hastighet (om det ingår) regleras av spaken
(1), vars positioner indikeras av skylten.
4.1
34
FIN TURVALLISUUSSÄÄNNÖT
NOUDATA TARKASTI
36
1. KOKOONPANON TÄYDENNYS
2.3
4.1
CZ BEZPEČNOSTNÍ POKYNY
DODRŽUJTE VELMI PŘESNĚ
38
BEZWZGL DNIE PRZESTRZEGAĆ NINIEJSZE INSTRUKCJE
40
2.2
42
3.2
44
2. éèàëÄçàÖ éêÉÄçéÇ ìèêÄÇãÖçàü
2.1
Ç ÏÓ‰ÂÎflı Ò ˝ÎÂÍÚ˘ÂÒÍËÏ ÒÚ‡ÚÂÓÏ ÔÓ‚ÂÌËÚ Íβ˜
Á‡ÊË„‡ÌËfl (3).
46
4.1
SLO VARNOSTNI PREDPISI
KI JIH JE TREBA NATANČNO UPOŠTEVATI
48
50
1.2
52
2.2
54
1. MONTAVIMO UŽBAIGIMAS
2. PRIETAIS
56
EE OHUTUSNÕUDED
RANGELT JÄRGIDA
58
2.3
CS SIGURNOSNA PRAVILA
KOJIH SE TREBA STROGO PRIDRŽAVATI
60
Kod modela sa električnim uključivanjem, povezati
kabl baterije na priključak glavne kablaže kosilice.
2.3
GB
Service, spare parts and guarantee
Maintenance and repair
The maintenance and repair of modern machines, as well
as all safety devices, require qualified technical training and
a special workshop equipped with special tools and testing
devices.
All work not described in this Instruction Manual may be
done only by a properly qualified workshop or authorised
service centre.
The DOLMAR service centres have all the necessary equipment and skilled and experienced personnel, who can work
out cost-effective solutions and advise you in all matters.
Repair attempts by third parties or unauthorized persons
will void all warranty claims.
Please note that we cannot accept any responsibility for
damage caused by:
• Disregard of the instruction manual.
• Non-performance of the required maintenance and
cleaning.
• Incorrect carburetor adjustment.
• Normal wear and tear.
• Obvious overloading due to permanent exceeding of the
upper performance limits.
• Use of force, improper use, misuse or accidents.
• Damage from overheating due to dirt on the fan housing.
• Work on the machine by unskilled persons or inappropriate repairs.
• Use of unsuitable spare parts or parts which are not original DOLMAR parts, insofar as they have caused the
damage.
• Use of unsuitable or old oil.
• Damage related to conditions arising from lease or rent
contracts.
Cleaning, servicing and adjustment work is not covered by
the guarantee. All repairs covered by the guarantee must
be performed by a DOLMAR service centre.
Reinigungs-, Pflege- und Einstellarbeiten werden nicht als
Garantieleistung anerkannt. Jegliche Garantiearbeiten sind
von einem DOLMAR Fachhändler auszuführen.
Responsibility
On tools with engines by Briggs&Stratton, Honda,
Tecumseh or Robin Subaru, the engine manufacturer or
their authorised service centre is responsible for the engine
only. DOLMAR is responsible for the rest of the tool
(excluding the engine).
This does not apply to electrical generators and all
other tools or equipment not containing engines of the
above brands.
Only DOLMAR is responsible for these tools and equipment.
Spare parts
Reliable long-term operation, as well as the safety of your
machine, depend among other things on the quality of the
spare parts used.
Use only original DOLMAR parts.
Only original spare parts and accessories guarantee the
highest quality in material, dimensions, function and safety.
Original spare parts and accessories can be obtained from
your local dealer. He will also have the spare part lists to
determine the required spare part numbers, and will be
constantly informed about the latest improvements and
spare part innovations.
Please note that the use of non-original parts renders the
warranty void.
Guarantee
DOLMAR guarantees the highest quality and will therefore
reimburse all costs for repair by replacement of damaged
parts resulting from material or production faults occurring
within the guarantee period after purchase. Please note
that in some countries particular guarantee conditions may
exist. If you have any questions, please contact your salesman, who is responsible for the guarantee of the product.
Garanzia
NL
E
Garanti
∏ DOLMAR ÂÁÁ˘¿Ù·È ¿„ÔÁË ÔÈfiÙËÙ· Î·È ·Ó·Ï·Ì‚¿ÓÂÈ
ÙÔ ÎfiÛÙÔ˜ Ù˘ ÂÈÁÂÓÔ̤Ó˘ ‚ÂÏÙ›ˆÛ˘, ·ÓÙÈηıÈÛÙÒÓÙ·˜
∂ÁÁ‡ËÛË
Reservdelar
¶·ÓÙfi˜ ›‰Ô˘˜ ÂÚÁ·Û›Â˜ Ô˘ ÚÔ·ÙÔ˘Ó ·fi ÙËÓ
ÂÁÁ‡ËÛË Ú¤ÂÈ Ó· ÂÎÙÂÏÔ‡ÓÙ·È ·fi ¤Ó·Ó ÂȉÈο
ηٷÚÙÈṲ̂ÓÔ ¤ÌÔÚÔ Ù˘ DOLMAR.
TR
S
Takuu
CZ
RU
é·ÒÎÛÊË‚‡ÌËÂ, Á‡Ô‡ÒÌ˚ ˜‡ÒÚË Ë „‡‡ÌÚËfl
é·ÒÎÛÊË‚‡ÌËÂ Ë ÂÏÓÌÚ
ÑÎfl ÚÂıÓ·ÒÎÛÊË‚‡ÌËfl Ë ÂÏÓÌÚ‡ ÒÓ‚ÂÏÂÌÌ˚ı
ÔË·ÓÓ‚, ‡ Ú‡ÍÊ ÛflÁ‚ËÏ˚ı ÛÁÎÓ‚ Ú·ÛÂÚÒfl
Í‚‡ÎËÙˈËÓ‚‡Ì̇fl ÒÔˆˇθ̇fl ÔÓ‰„ÓÚӂ͇ Ë
χÒÚÂÒ͇fl, ÓÒ̇˘ÂÌ̇fl ÒÔˆˇθÌ˚ÏË ËÌÒÚÛÏÂÌÚ‡ÏË Ë ÍÓÌÚÓθÌ˚ÏË ÔË·Ó‡ÏË.
ÇÒ ‡·ÓÚ˚, Ì ÓÔËÒ‡ÌÌ˚ ‚ ‰‡ÌÌÓÈ ËÌÒÚÛ͈ËË ÔÓ
˝ÍÒÔÎÛ‡Ú‡ˆËË,
‰ÓÎÊÌ˚
‚˚ÔÓÎÌflÚ¸Òfl
‚
ÒÓÓÚ‚ÂÚÒÚ‚Û˛˘ÂÈ ÒÔˆˇÎËÁËÓ‚‡ÌÌÓÈ Ï‡ÒÚÂÒÍÓÈ
ËÎË Ì‡ ÙËÏÂÌÌÓÈ Òڇ̈ËË ÚÂıÌ˘ÂÒÍÓ„Ó Ó·ÒÎÛÊË‚‡ÌËfl.
ëÂ‚ËÒÌ˚ ˆÂÌÚ˚ ÙËÏ˚ DOLMAR ÓÒ̇˘ÂÌ˚ ‚ÒÂÏ
ÌÂÓ·ıÓ‰ËÏ˚Ï Ó·ÓÛ‰Ó‚‡ÌËÂÏ, ‡ Ó·Û˜ÂÌÌ˚È Ë ÓÔ˚ÚÌ˚È
ÔÂÒÓ̇ΠÏÓÊÂÚ ‡Á‡·ÓÚ‡Ú¸ ˝ÍÓÌÓÏ˘Ì˚ ¯ÂÌËfl Ë
ÔÓÍÓÌÒÛθÚËÓ‚‡Ú¸ ÔÓ ‚ÒÂÏ ‚ÓÔÓÒ‡Ï.
èË ÔÓÔ˚ÚÍ ÂÏÓÌÚ‡ χ¯ËÌÍË ÚÂÚ¸ËÏË Îˈ‡ÏË ËÎË
Ì ‡‚ÚÓËÁÓ‚‡ÌÌ˚ÏË Îˈ‡ÏË Ô‡‚Ó Ì‡ „‡‡ÌËÚ˛
ÚÂflÂÚÒfl.
KÓÏÔÂÚÂ̈Ëfl
íÓθÍÓ ‚ ÔË·Ó‡ı Ò ‰‚Ë„‡ÚÂÎflÏË Ï‡ÍË
Briggs&Stratton, Honda, Tecumseh Ë ÇÓbin Subaru:
ÍÓÏÔÂÚÂ̈ËÂÈ ‚ ÓÚÌÓ¯ÂÌËË ÚÂıÓ·ÒÎÛÊË‚‡ÌËfl
‰‚Ë„‡ÚÂÎfl ‚ χÒÚÂÒÍËı, Á‡Ô‡ÒÌ˚ı ˜‡ÒÚÂÈ Ë „‡‡ÌÚËË
̇ ‰‚Ë„‡ÚÂθ ӷ·‰‡ÂÚ ÔÓËÁ‚Ó‰ËÚÂθ ‰‚Ë„‡ÚÂÎfl ËÎË
ÒÓÓÚ‚ÂÚÒÚ‚Û˛˘‡fl ÙËÏÂÌ̇fl Òڇ̈Ëfl ÚÂıÌ˘ÂÒÍÓ„Ó
Ó·ÒÎÛÊË‚‡ÌËfl. Ç ÓÚÌÓ¯ÂÌËË ÓÒڇθÌÓÈ ˜‡ÒÚË ÔË·Ó‡
(Á‡ ËÒÍβ˜ÂÌËÂÏ ‰‚Ë„‡ÚÂÎfl) ÍÓÏÔÂÚÂ̈ËÂÈ Ó·Î‡‰‡ÂÚ
DOLMAR.
ùÚÓ ÔÓÎÓÊÂÌË Ì ‡ÒÔÓÒÚ‡ÌflÂÚÒfl ̇ „ÂÌÂ‡ÚÓ˚
ÚÓ͇, ‡ Ú‡ÍÊ ‚Ò ‰Û„Ë ÔË·Ó˚, Ì ÒÓ‰Âʇ˘ËÂ
‚˚¯ÂÛ͇Á‡ÌÌ˚ ‰‚Ë„‡ÚÂÎË. ÑÎfl ÌËı ÍÓÏÔÂÚÂÌÚ̇
ÚÓθÍÓ ÙËχ DOLMAR.
燉ÂÊ̇fl ‡·ÓÚ‡ Ë ‰Ó΄ӂ˜ÌÓÒÚ¸, ‡ Ú‡ÍÊÂ
·ÂÁÓÔ‡ÒÌÓÒÚ¸ ˆÂÔÌÓÈ ÔËÎ˚ Á‡‚ËÒflÚ ÍÓÏ ÔӘ„Ó, ÓÚ
͇˜ÂÒÚ‚‡ ÔËÏÂÌflÂÏ˚ı Á‡Ô‡ÒÌ˚ı ˜‡ÒÚÂÈ. àÒÔÓθÁ˜ÈÚÂ
ÚÓθÍÓ ÓË„Ë̇θÌ˚ Á‡Ô˜‡ÒÚË.
íÓθÍÓ
ÓË„Ë̇θÌ˚Â
Á‡Ô‡ÒÌ˚Â
˜‡ÒÚË
Ë
‰ÓÔÓÎÌËÚÂθ̇fl ÓÒ̇ÒÚ͇ „‡‡ÌÚËÛ˛Ú Ì‡Ë‚˚Ò¯ÂÂ
͇˜ÂÒÚ‚Ó Ï‡ÚÂˇ·, Á‡ÏÂÌ˚ Ë ÙÛÌ͈ËÓÌËÓ‚‡ÌËfl.
éË„Ë̇θÌ˚ Á‡Ô‡ÒÌ˚ ˜‡ÒÚË Ë ‰ÓÔÓÎÌËÚÂθÌÛ˛
ÓÒ̇ÒÚÍÛ
ÏÓÊÌÓ
ÔËÓ·ÂÒÚË
Û
ÏÂÒÚÌÓ„Ó
‰ËÒÚË·¸˛ÚÓ‡. éÌ Ê Ô‰ÓÒÚ‡‚ËÚ Ç‡Ï ÔÂ˜ÌË
Á‡Ô‡ÒÌ˚ı ˜‡ÒÚÂÈ, ÔÓÁ‚ÓÎfl˛˘Ë ÛÒÚ‡ÌÓ‚ËÚ¸ ÌÓÏÂ‡
ÌÂÓ·ıÓ‰ËÏ˚ı Á‡Ô‡ÒÌ˚ı ˜‡ÒÚÂÈ, Ë ËÌÙÓχˆË˛ Ó
ÌÓ‚ÂȯËı ÛÒÓ‚Â¯ÂÌÒÚ‚Ó‚‡ÌËflı Ë ËÁÏÂÌÂÌËflı ‚
Á‡Ô‡ÒÌ˚ı ˜‡ÒÚflı.
èÓʇÎÛÈÒÚ‡, ÔËÏËÚ ڇÍÊ ‚Ó ‚ÌËχÌËÂ, ˜ÚÓ ÔË
ËÒÔÓθÁÓ‚‡ÌËË Ì ÓË„Ë̇θÌ˚ı ‰ÂÚ‡ÎÂÈ Ô‡‚Ó Ì‡
„‡‡ÌÚËÈÌÓ ӷÒÎÛÊË‚‡ÌË ÛÚ‡˜Ë‚‡ÂÚÒfl.
HR
SLO
•EG-KONFORMITÄTSERKLÄRUNG •DECLARATION DE CONFORMITE CEE •EC DECLARATION OF CONFORMITY •DICHIARAZIONE DI
CONFORMITÀ CEE •EEG-VERKLARING VAN OVEREENSTEMMING •DECLARACIÓN “CE” DE CONFORMIDAD •DECLARAÇÃO CE DE
CONFORMIDADE •¢∏§ø™∏ ™Àªª√ƒºø™∏™ ∂∂ •AET UYGUNLUK BEYANNAMES‹ •EG-FÖRKLARING FÖR ÖVERENSSSTÄMMELSE •EUOVERENSSTEMMELSESERKLÆRING •CE-YHDENMUKAISUUSTODISTUS •ES PROHLÁŠENĺ O SHODĚ •DEKLARACJA ZGODNOŚCI Z
ÑÖKãÄêÄñàü ëééíÇÖíëíÇàü Öë •EC IZJAVA O SUKLADNOSTI
WYMOGAMI UE •EGK SZABVÁNYAZONOSSÁGI NYILATKOZAT •Ñ
•IZJAVA O SKLADNOSTI CEE •ES VYHLÁSENIE O ZHODE •DECLARAŢIE DE CONFORMITATE CEE •CEE REIKALAVIM ATITIKIMO
DEKLARACIJA •EK ATBILST±BAS DEKLARÅCIJA •EMÜ VASTAVUSDEKLARATSIOON •DEKLARACIJA O SAGLASNOSTI EEZ
•Die Firma •La société •The company •La società •Het bedrijf •La sociedad •A sociedade •∏ ÂÙ·ÈÚ›· •fiirket •Företaget •Firmaet •Yritys
•Společnost •Spółka •Alulírott Vállalat •è‰ÔËflÚË •Tvrtka •Družba •Spoločnos •Societatea •Bendrovò •Uz¿ïmums •Firma •Preduzeće
51 cm
•Motor •Moteur •Engine •Motore •Motor •Motor •Motor •∫ÈÓËÙ‹Ú·˜ •Motor •Motor •Motor •Moottori •Motorem •Silnik •Motor •Ñ‚Ë„‡ÚÂθ •Motor Briggs & Stratton
12H802 - 12H807
•Motor •Motorom •Motor •Variklis •Motors •Mootor •Motor
•Geprüft durch •Examinée par •Tested by •Esaminato da •Getest door •Provado por •Testado por •¶Ô˘ ÂϤÁ¯ıËΠ·fi •Yandaki kurum tarafından SNCH, 11 route de Luxembourg
L-5230 SANDWEILER
incelenmifl •Testad av •Kontrolleret af •Tarkastuksen suorittanut •Zkoušená •Sprawdzona przez •Bevizsgálta •èÓ‚ÂËÎ •Ispitana od strane
•Pregledal •Skúšaná •Examinat de •Patikrinimà atliko •PÇrbaud¥ja •Kontrollitud •Ispitana od
•Entspricht den Anforderungen der Richtlinien •Est conforme aux spécifications des directives •Conforms to the specifications of directives •È con- 98/37/EEC
89/336/EEC ~ 93/68/EEC
forme alle specifiche delle direttive •Voldoet aan de specificaties van de richtlijnen •Es conforme con las especificaciones de las directivas •Está
2000/14/EC
conforme às especificações das directivas •™˘ÌÌÔÚÊÔ‡Ù·È ÛÙȘ ÚԉȷÁڷʤ˜ ÙˆÓ Ô‰ËÁÈÒÓ •Yandaki direktiflerin özelliklerine uygun oldu¤unu
beyan eder •Uppfyller specifikationerna i direktiven •Er i overensstemmelse med specifikationerne ifølge direktiverne •On yhdenmukainen EU-direktiivien asettamien vaatimusten kanssa •Je ve shodě s požadavky směrnic •Jest zgodna ze specyfikacją zawartą w dyrektywach •Megfelel az alábbi
irányelvek előírásainak •ëÓÓÚ‚ÂÚÒÚ‚ÛÂÚ Ú·ӂ‡ÌËflÏ ÒÎÂ‰Û˛˘Ëı ‰ËÂÍÚË‚ •Sukladna s temeljnim zahtjevima direktiva •Skladno s specifikacijami direktiv •Je v zhode s požiadavkami smerníc •Este în conformitate cu specificaţiile directivelor •Atitinka direktyvose pateiktas specifikacijas
•Atbilst šÇdu direkt¥vu specifikÇcijÇm •Vastab direktiivide nõuetele •U skladu je s temeljnim zahtevima direktiva
•Angewandtes Konformitätsbewertungsverfahren •Procédure appliquée pour l’évaluation de la conformité •Conformity assessment procedure
•Procedura seguita per la valutazione della conformità •Gevolgde procedure voor de beoordeling van de overeenstemming •Procedimiento efectuado para la evaluación de la conformidad •Procedimento observado para a avaliação de conformidade •¢È·‰Èηۛ· Ô˘ ·ÎÔÏÔ˘ı‹ıËΠÁÈ· ÙËÓ
ÂÎÙ›ÌËÛË Ù˘ Û˘ÌÌfiÚʈÛ˘ •Uygunlu¤un de¤erlendirilmesi için izlenmifl prosedür •Procedur för utvärdering av konformitet •Følgende procedure er
udført til vurdering af overensstemmelsen •Suoritetut toimenpiteet yhdenmukaisuuden määrittelemiseksi •Posouzení shody bylo provedeno podle
•Śledzona procedura dla oceny zgodności •A szabványazonosság megállapításához követett eljárás •èӈ‰Û‡, ËÒÔÓθÁÛÂχfl ‰Îfl ÓˆÂÌÍË
ÒÓÓÚ‚ÂÚÒÚ‚Ëfl •Provedeni postupak ocjene sukladnosti •Postopek za oceno skladnosti •Posúdenie zhody bolo vykonané poda •Procedură urmată
pentru evaluarea conformităţii •Atitikimo ∞vertinimo procedra pateikta •Atbilst¥bas novïrtïšanai izmantotÇ procedra •Vastavuse hindamiseks läbiviidud protseduur •Praćeni postupak za procenu saglasnosti
•ANHANG VI •ANNEXE VI •ANNEX VI
•ALLEGATO VI •BIJLAGE IV •ANEXO VI
•ANEXO VI •™À¡∏ªª∂¡√ VI •EK VI
•BILAGA VI •BILAG VI •LIITE VI
•PŘĺLOHY VI •ZAŁĄCZNIK VI •VI.
èêàãéÜÖçàÖ VI •ANEKS
MELLÉKLET •è
VI •PRILOGA VI •PRĺLOHY VI •ANEXA VI
•PRIEDAS VI •VI PIELIKUMS •LISA VI
•ANEKS VI
96 dB(A)
•Gemessener Schalleistungspegel •Niveau de puissance acoustique mesuré •Measured sound power level •Livello di potenza acustica rilevato
•Gemeten geluidsniveau •Nivel de potencia acústica detectado •Nível de potência sonora detectado •ªÂÙÚË̤ÓË ÛÙ¿ıÌË ıÔÚ‡‚Ô˘ •Ölçülmüfl ses
gücü seviyesi •Uppmätt bullernivå •Målt støjniveau •Mitattu melutaso •Zjištěná hladina akustického výkonu •Stwierdzony poziom mocy akustycznej
•Mért zajteljesítmény szint •á‡ÏÂÂÌÌ˚È ÛÓ‚Â̸ ‡ÍÛÒÚ˘ÂÒÍÓÈ ÏÓ˘ÌÓÒÚË •Izmjerena razina zvučne snage •Izmerjena raven akustične moči
•Zistená hladina akustického výkonu •Nivel de putere acustică detectat •Nustatytas akustinòs galios lygmuo •Izmïr¥tais akustiskÇs jaudas l¥menis
•Mõõdetud akustilise võimsuse tase •Izmereni nivo jačine zvuka
97 dB(A)
•Garantierter Schalleistungspegel •Niveau de puissance acoustique garanti •Guaranteed sound power level •Livello di potenza acustica garantito
•Gewaarworgd geluidsniveau •Nivel de potencia acústica garantizado •Nível de potência sonora garantido •ª¤ÁÈÛÙË ÛÙ¿ıÌË ıÔÚ‡‚Ô˘ Û‡Ìʈӷ ÌÂ
ÙËÓ ÂÁÁ‡ËÛË •Garanti edilen ses gücü seviyesi •Garanterad bullernivå •Garanteret støjniveau •Taattu melutaso •Zaručená hladina akustického
výkonu •Gwarantowany poziom mocy akustycznej •Garantált zajteljesítmény szint •É‡‡ÌÚËÛÂÏ˚È ÛÓ‚Â̸ ‡ÍÛÒÚ˘ÂÒÍÓÈ ÏÓ˘ÌÓÒÚË •Zajamčena
razina zvučne snage •Zajamčena raven akustične moči •Zaručená hladina akustického výkonu •Nivel de putere acustică garantat •Garantuotas akustinòs galios lygmuo •Garantïtais akustiskÇs jaudas l¥menis •Garanteeritud akustilise võimsuse tase •Garantovani nivo jačine zvuka
•Verweis auf harmonisierte Normen •Référence aux normes harmonisées •Reference to harmonised standards •Riferimento alle norme armonizzate EN 836 - EN 292-2
EN 1033 - EN ISO 3767
•Verwijzing naar de geharmoniseerde normen •Referencia a las normas armonizadas •Referências às normas harmonizadas •∞Ó·ÊÔÚ¿ ÛÂ
EN ISO 14982
ÂÓ·ÚÌÔÓÈṲ̂ӷ ÚfiÙ˘· •Harmonize standartlara atıf •Henvisning til harmoniserede standarder •Referens till harmoniserad standard •Viittaus
yhdenmukaisuusstandardeihin •Použité harmonizované normy •W odniesieniu do norm harmonizujących •Hivatkozás a harmonizált szabványokra
•ëÒ˚ÎÍË Ì‡ Òӄ·ÒÓ‚‡ÌÌ˚ ÌÓÏ˚ •Primijenjene su slijedeće harmonizirane norme •Sklic na usklajene predpise •Použité harmonizované normy
•Referinţă la normele armonizate •Nuoroda ∞ suderintus teisinius aktus •Atsauce uz saska¿otÇm normÇm •Viide kooskõlastatud normidele
•Pozivanje na usklađene norme
84 dB(A)
•Schalldruckpegel am Ohr des Bedieners gemäß 81/1051/EWG •Niveau de pression sonore à l‘oreille de l’utilisateur conforme à la directive
81/1051/CEE •Sound pressure level at the ear measured in compliance with 81/1051/CEE •Pressione acustica orecchio operatore in conformità alla
81/1051/CEE •Geluidsniveau aan het oor van de gebruiker overeenkomstig de richtlijn 81/1051/EEG •Presión acústica en el oído del operador conforme a la 81/1051/CEE •Pressão acústica nos ouvidos do operador em conformidade com a directiva 81/1051/CEE •∞ÎÔ˘ÛÙÈ΋ ›ÂÛË ÛÙÔ ·˘Ù›
ÙÔ˘ ¯ÂÈÚÈÛÙ‹ Û‡Ìʈӷ Ì 81/1051/∂√∫ •81/1051/AET’ye uygun olarak operatör kula¤ına gelen ses basıncı •Ljudtryck vid operatörens öron i enlighet med 81/1051/EEC •Lydtryk ved operatorens ører i henhold til 81/1051/CEE •Ilmanpaine käyttäjän korvien kohdalla on yhdenmukainen direktiivin 81/1051/ETY kanssa •Akustický tlak působící na ucho obsluhy ve shodě s 81/1051/EHS •Ciśnienie akustyczne na ucho operatora zgodnie z
81/1051/UE •A kezelő fülénél mért zajnyomás a 81/1051/EGK-nak megfelelően •ÄÍÛÒÚ˘ÂÒÍÓ ‰‡‚ÎÂÌË ̇ Û¯Ë ÓÔÂ‡ÚÓ‡, Á‡ÏÂÂÌÌÓÂ
Òӄ·ÒÌÓ 81/1051/CEE •Zvučni tlak na ušima rukovatelja je sukladan Direktivi 81/1051/EEC •Akustični pritisk na ušesa operaterja je skladen s predpisom 81/1051/CEE •Akustický tlak na sluchový orgán obsluhy je v zhode s nariadením 81/1051/EHS •Presiune acustică în urechea operatorului în
conformitate cu 81/1051/CEE •Akustinis slògis operatoriaus klausai atitinka 81/1051/CEE •Akustiskais spiediens uz operatora aus¥m, izmïr¥tais
saska¿Ç ar 81/1051/EEK •Akustiline surve töötaja kõrvale vastavalt 81/1051/ CEE •Nivo zvučnog pritiska na uhu radnika u skladu sa odredbom
81/1051/CEE
•Vibrationswert am oberen Führungsholm (EN 1033) •Niveau de vibrations sur le guidon (EN 1033) •Vibration level on the handle (EN 1033) •Valore 3 m/s2
delle vibrazioni sul manico (EN 1033) •Vibratiewaarde aan de handgreep (EN 1033) •Nivel de las vibraciones en el mango (EN 1033) •Valor das
vibrações na pega (EN 1033) •∆ÈÌ‹ ‰ÔÓ‹ÛÂˆÓ ÛÙË ¯ÂÈÚÔÏ·‚‹ (EN 1033) •Tutak üzerinde vibrasyon de¤eri (EN 1033) •Vibrationsvärde vid handtaget
(EN 1033) •Værdi for vibrationer på håndtaget (EN 1033) •Kahvaan kohdistuva tärinäarvo (EN 1033) •Hladina vibrací na rukojeti (EN 1033) •Wartość
wibracji na uchwycie (EN 1033) •Rezgési érték a markolaton (EN 1033) •ìÓ‚Â̸ ‚Ë·‡ˆËÈ ÛÍÓflÚÍË (EN 1033) •Vrijednost vibracija na ručki (EN
1033) •Vrednost vibracij na ročaju (EN 1033) •Úroveň vibrácií na rukoväti (EN 1033) •Nivel de vibraţii pe mâner (EN 1033) •Rankenos vibracij vertò
(EN 1033) •Roktura vibrÇcijas l¥menis (EN 1033) •Käepideme vibratsiooni määr (EN 1033) •Vrednost vibracija na dršci (EN1033)
Hamburg
02-10-2006
S. KOMINAMI (Managing Director)
R. BERGFELD (Managing Director)
•EG-KONFORMITÄTSERKLÄRUNG •DECLARATION DE CONFORMITE CEE •EC DECLARATION OF CONFORMITY •DICHIARAZIONE DI
CONFORMITÀ CEE •EEG-VERKLARING VAN OVEREENSTEMMING •DECLARACIÓN “CE” DE CONFORMIDAD •DECLARAÇÃO CE DE
CONFORMIDADE •¢∏§ø™∏ ™Àªª√ƒºø™∏™ ∂∂ •AET UYGUNLUK BEYANNAMES‹ •EG-FÖRKLARING FÖR ÖVERENSSSTÄMMELSE •EUOVERENSSTEMMELSESERKLÆRING •CE-YHDENMUKAISUUSTODISTUS •ES PROHLÁŠENĺ O SHODĚ •DEKLARACJA ZGODNOŚCI Z
ÑÖKãÄêÄñàü ëééíÇÖíëíÇàü Öë •EC IZJAVA O SUKLADNOSTI
WYMOGAMI UE •EGK SZABVÁNYAZONOSSÁGI NYILATKOZAT •Ñ
•IZJAVA O SKLADNOSTI CEE •ES VYHLÁSENIE O ZHODE •DECLARAŢIE DE CONFORMITATE CEE •CEE REIKALAVIM ATITIKIMO
DEKLARACIJA •EK ATBILST±BAS DEKLARÅCIJA •EMÜ VASTAVUSDEKLARATSIOON •DEKLARACIJA O SAGLASNOSTI EEZ
•Die Firma •La société •The company •La società •Het bedrijf •La sociedad •A sociedade •∏ ÂÙ·ÈÚ›· •fiirket •Företaget •Firmaet •Yritys
•Společnost •Spółka •Alulírott Vállalat •è‰ÔËflÚË •Tvrtka •Družba •Spoločnos •Societatea •Bendrovò •Uz¿ïmums •Firma •Preduzeće
•Bestätigt, dass der Rasenmäher mit Verbrennungsmotor •Atteste que la tondeuse à gazon avec moteur à combustion •Certifies that the lawnmo- PM-5365 S3 pro
wer with combustion engine •Attesta che il rasaerba con motore a combustione •Verklaart dat de grasmaaier met verbrandingsmotor •Certifica
que la cortadora de pasto con motor de combustión •Certifica que o corta-relva com motor de combustão •µÂ‚·ÈÒÓÂÈ fiÙÈ ÙÔ ¯ÏÔÔÎÔÙÈÎfi ÌÂ
‚ÂÓ˙ÈÓÔÎÈÓËÙ‹Ú· •Yandaki yanmalı motor ile donatılmıfl çim biçme makinesinin •Intygar att gräsklippningstraktorn med förbränningsmotor
•Erklærer herved, at græsklipperen med forbrændingsmotor •Todistaa, että polttomoottorilla varustettu ruohonleikkuri •Prohlašuje, že travní
sekačka se spalovacím motorem model •Zaświadcza, że kosiarka trawy z silnikiem na paliwo •Tanúsítja, hogy a belsőégésű motorral rendelkező
fűnyíró •ì‰ÓÒÚÓ‚ÂflÂÚ, ˜ÚÓ „‡ÁÓÌÓÍÓÒËÎ͇ Ò ‰‚Ë„‡ÚÂÎÂÏ ‚ÌÛÚÂÌÌÂ„Ó Ò„Ó‡ÌËfl •Izjavljuje da je kosilica s motorom s unutarnjim izgaranjem
•Potrjuje, da je kosilnica z motorjem na izgorevanje •Vyhlasuje, že kosačka na trávu so spaovacím motorom, model •Atestă că mașina de tuns
iarba cu motor cu ardere internă •Liudija, kad žoliapjvò su vidaus decimo varikliu •Apliecina, ka zÇles p∫aujmaš¥na ar iekšdedzes dzinïju •Kinnitab,
et sisepõlemismootoriga muruniiduk •Potvrđuje da kosilica ima motor sa unutrašnjim sagorevanjem
•Schnittbreite •Largeur de coupe •Width of cut •Larghezza di taglio •Maaibreedte •Anchura de corte •Largura de corte •¶Ï¿ÙÔ˜ ÎÔ‹˜ •Kesim
geniflli¤i •Klippbredd •Skærebredde •Leikkuualue •Šířkou záběru •Szerokość koszenia •Nyírási szélesség •òËË̇ Ò͇¯Ë‚‡ÌËfl •Širina rezanja
•Širina reza •Šírkou záberu •Lăţime de tăiere •Pjovimo plotis •P∫aušanas platums •Lõikelaius •Širina reza
51 cm
•Motor •Moteur •Engine •Motore •Motor •Motor •Motor •∫ÈÓËÙ‹Ú·˜ •Motor •Motor •Motor •Moottori •Motorem •Silnik •Motor •Ñ‚Ë„‡ÚÂθ •Motor Honda GCV 190
•Motor •Motorom •Motor •Variklis •Motors •Mootor •Motor
•Geprüft durch •Examinée par •Tested by •Esaminato da •Getest door •Provado por •Testado por •¶Ô˘ ÂϤÁ¯ıËΠ·fi •Yandaki kurum tarafından SNCH, 11 route de Luxembourg
L-5230 SANDWEILER
incelenmifl •Testad av •Kontrolleret af •Tarkastuksen suorittanut •Zkoušená •Sprawdzona przez •Bevizsgálta •èÓ‚ÂËÎ •Ispitana od strane
•Pregledal •Skúšaná •Examinat de •Patikrinimà atliko •PÇrbaud¥ja •Kontrollitud •Ispitana od
•Entspricht den Anforderungen der Richtlinien •Est conforme aux spécifications des directives •Conforms to the specifications of directives •È con- 98/37/EEC
89/336/EEC ~ 93/68/EEC
forme alle specifiche delle direttive •Voldoet aan de specificaties van de richtlijnen •Es conforme con las especificaciones de las directivas •Está
2000/14/EC
conforme às especificações das directivas •™˘ÌÌÔÚÊÔ‡Ù·È ÛÙȘ ÚԉȷÁڷʤ˜ ÙˆÓ Ô‰ËÁÈÒÓ •Yandaki direktiflerin özelliklerine uygun oldu¤unu
beyan eder •Uppfyller specifikationerna i direktiven •Er i overensstemmelse med specifikationerne ifølge direktiverne •On yhdenmukainen EU-direktiivien asettamien vaatimusten kanssa •Je ve shodě s požadavky směrnic •Jest zgodna ze specyfikacją zawartą w dyrektywach •Megfelel az alábbi
irányelvek előírásainak •ëÓÓÚ‚ÂÚÒÚ‚ÛÂÚ Ú·ӂ‡ÌËflÏ ÒÎÂ‰Û˛˘Ëı ‰ËÂÍÚË‚ •Sukladna s temeljnim zahtjevima direktiva •Skladno s specifikacijami direktiv •Je v zhode s požiadavkami smerníc •Este în conformitate cu specificaţiile directivelor •Atitinka direktyvose pateiktas specifikacijas
•Atbilst šÇdu direkt¥vu specifikÇcijÇm •Vastab direktiivide nõuetele •U skladu je s temeljnim zahtevima direktiva
•Angewandtes Konformitätsbewertungsverfahren •Procédure appliquée pour l’évaluation de la conformité •Conformity assessment procedure
•Procedura seguita per la valutazione della conformità •Gevolgde procedure voor de beoordeling van de overeenstemming •Procedimiento efectuado para la evaluación de la conformidad •Procedimento observado para a avaliação de conformidade •¢È·‰Èηۛ· Ô˘ ·ÎÔÏÔ˘ı‹ıËΠÁÈ· ÙËÓ
ÂÎÙ›ÌËÛË Ù˘ Û˘ÌÌfiÚʈÛ˘ •Uygunlu¤un de¤erlendirilmesi için izlenmifl prosedür •Procedur för utvärdering av konformitet •Følgende procedure er
udført til vurdering af overensstemmelsen •Suoritetut toimenpiteet yhdenmukaisuuden määrittelemiseksi •Posouzení shody bylo provedeno podle
•Śledzona procedura dla oceny zgodności •A szabványazonosság megállapításához követett eljárás •èӈ‰Û‡, ËÒÔÓθÁÛÂχfl ‰Îfl ÓˆÂÌÍË
ÒÓÓÚ‚ÂÚÒÚ‚Ëfl •Provedeni postupak ocjene sukladnosti •Postopek za oceno skladnosti •Posúdenie zhody bolo vykonané poda •Procedură urmată
pentru evaluarea conformităţii •Atitikimo ∞vertinimo procedra pateikta •Atbilst¥bas novïrtïšanai izmantotÇ procedra •Vastavuse hindamiseks läbiviidud protseduur •Praćeni postupak za procenu saglasnosti
•ANHANG VI •ANNEXE VI •ANNEX VI
•ALLEGATO VI •BIJLAGE IV •ANEXO VI
•ANEXO VI •™À¡∏ªª∂¡√ VI •EK VI
•BILAGA VI •BILAG VI •LIITE VI
•PŘĺLOHY VI •ZAŁĄCZNIK VI •VI.
èêàãéÜÖçàÖ VI •ANEKS
MELLÉKLET •è
VI •PRILOGA VI •PRĺLOHY VI •ANEXA VI
•PRIEDAS VI •VI PIELIKUMS •LISA VI
•ANEKS VI
96 dB(A)
•Gemessener Schalleistungspegel •Niveau de puissance acoustique mesuré •Measured sound power level •Livello di potenza acustica rilevato
•Gemeten geluidsniveau •Nivel de potencia acústica detectado •Nível de potência sonora detectado •ªÂÙÚË̤ÓË ÛÙ¿ıÌË ıÔÚ‡‚Ô˘ •Ölçülmüfl ses
gücü seviyesi •Uppmätt bullernivå •Målt støjniveau •Mitattu melutaso •Zjištěná hladina akustického výkonu •Stwierdzony poziom mocy akustycznej
•Mért zajteljesítmény szint •á‡ÏÂÂÌÌ˚È ÛÓ‚Â̸ ‡ÍÛÒÚ˘ÂÒÍÓÈ ÏÓ˘ÌÓÒÚË •Izmjerena razina zvučne snage •Izmerjena raven akustične moči
•Zistená hladina akustického výkonu •Nivel de putere acustică detectat •Nustatytas akustinòs galios lygmuo •Izmïr¥tais akustiskÇs jaudas l¥menis
•Mõõdetud akustilise võimsuse tase •Izmereni nivo jačine zvuka
98 dB(A)
•Garantierter Schalleistungspegel •Niveau de puissance acoustique garanti •Guaranteed sound power level •Livello di potenza acustica garantito
•Gewaarworgd geluidsniveau •Nivel de potencia acústica garantizado •Nível de potência sonora garantido •ª¤ÁÈÛÙË ÛÙ¿ıÌË ıÔÚ‡‚Ô˘ Û‡Ìʈӷ ÌÂ
ÙËÓ ÂÁÁ‡ËÛË •Garanti edilen ses gücü seviyesi •Garanterad bullernivå •Garanteret støjniveau •Taattu melutaso •Zaručená hladina akustického
výkonu •Gwarantowany poziom mocy akustycznej •Garantált zajteljesítmény szint •É‡‡ÌÚËÛÂÏ˚È ÛÓ‚Â̸ ‡ÍÛÒÚ˘ÂÒÍÓÈ ÏÓ˘ÌÓÒÚË •Zajamčena
razina zvučne snage •Zajamčena raven akustične moči •Zaručená hladina akustického výkonu •Nivel de putere acustică garantat •Garantuotas akustinòs galios lygmuo •Garantïtais akustiskÇs jaudas l¥menis •Garanteeritud akustilise võimsuse tase •Garantovani nivo jačine zvuka
•Verweis auf harmonisierte Normen •Référence aux normes harmonisées •Reference to harmonised standards •Riferimento alle norme armonizzate EN 836 - EN 292-2
EN 1033 - EN ISO 3767
•Verwijzing naar de geharmoniseerde normen •Referencia a las normas armonizadas •Referências às normas harmonizadas •∞Ó·ÊÔÚ¿ ÛÂ
EN ISO 14982
ÂÓ·ÚÌÔÓÈṲ̂ӷ ÚfiÙ˘· •Harmonize standartlara atıf •Henvisning til harmoniserede standarder •Referens till harmoniserad standard •Viittaus
yhdenmukaisuusstandardeihin •Použité harmonizované normy •W odniesieniu do norm harmonizujących •Hivatkozás a harmonizált szabványokra
•ëÒ˚ÎÍË Ì‡ Òӄ·ÒÓ‚‡ÌÌ˚ ÌÓÏ˚ •Primijenjene su slijedeće harmonizirane norme •Sklic na usklajene predpise •Použité harmonizované normy
•Referinţă la normele armonizate •Nuoroda ∞ suderintus teisinius aktus •Atsauce uz saska¿otÇm normÇm •Viide kooskõlastatud normidele
•Pozivanje na usklađene norme
83 dB(A)
•Schalldruckpegel am Ohr des Bedieners gemäß 81/1051/EWG •Niveau de pression sonore à l‘oreille de l’utilisateur conforme à la directive
81/1051/CEE •Sound pressure level at the ear measured in compliance with 81/1051/CEE •Pressione acustica orecchio operatore in conformità alla
81/1051/CEE •Geluidsniveau aan het oor van de gebruiker overeenkomstig de richtlijn 81/1051/EEG •Presión acústica en el oído del operador conforme a la 81/1051/CEE •Pressão acústica nos ouvidos do operador em conformidade com a directiva 81/1051/CEE •∞ÎÔ˘ÛÙÈ΋ ›ÂÛË ÛÙÔ ·˘Ù›
ÙÔ˘ ¯ÂÈÚÈÛÙ‹ Û‡Ìʈӷ Ì 81/1051/∂√∫ •81/1051/AET’ye uygun olarak operatör kula¤ına gelen ses basıncı •Ljudtryck vid operatörens öron i enlighet med 81/1051/EEC •Lydtryk ved operatorens ører i henhold til 81/1051/CEE •Ilmanpaine käyttäjän korvien kohdalla on yhdenmukainen direktiivin 81/1051/ETY kanssa •Akustický tlak působící na ucho obsluhy ve shodě s 81/1051/EHS •Ciśnienie akustyczne na ucho operatora zgodnie z
81/1051/UE •A kezelő fülénél mért zajnyomás a 81/1051/EGK-nak megfelelően •ÄÍÛÒÚ˘ÂÒÍÓ ‰‡‚ÎÂÌË ̇ Û¯Ë ÓÔÂ‡ÚÓ‡, Á‡ÏÂÂÌÌÓÂ
Òӄ·ÒÌÓ 81/1051/CEE •Zvučni tlak na ušima rukovatelja je sukladan Direktivi 81/1051/EEC •Akustični pritisk na ušesa operaterja je skladen s predpisom 81/1051/CEE •Akustický tlak na sluchový orgán obsluhy je v zhode s nariadením 81/1051/EHS •Presiune acustică în urechea operatorului în
conformitate cu 81/1051/CEE •Akustinis slògis operatoriaus klausai atitinka 81/1051/CEE •Akustiskais spiediens uz operatora aus¥m, izmïr¥tais
saska¿Ç ar 81/1051/EEK •Akustiline surve töötaja kõrvale vastavalt 81/1051/ CEE •Nivo zvučnog pritiska na uhu radnika u skladu sa odredbom
81/1051/CEE
•Vibrationswert am oberen Führungsholm (EN 1033) •Niveau de vibrations sur le guidon (EN 1033) •Vibration level on the handle (EN 1033) •Valore 4 m/s2
delle vibrazioni sul manico (EN 1033) •Vibratiewaarde aan de handgreep (EN 1033) •Nivel de las vibraciones en el mango (EN 1033) •Valor das
vibrações na pega (EN 1033) •∆ÈÌ‹ ‰ÔÓ‹ÛÂˆÓ ÛÙË ¯ÂÈÚÔÏ·‚‹ (EN 1033) •Tutak üzerinde vibrasyon de¤eri (EN 1033) •Vibrationsvärde vid handtaget
(EN 1033) •Værdi for vibrationer på håndtaget (EN 1033) •Kahvaan kohdistuva tärinäarvo (EN 1033) •Hladina vibrací na rukojeti (EN 1033) •Wartość
wibracji na uchwycie (EN 1033) •Rezgési érték a markolaton (EN 1033) •ìÓ‚Â̸ ‚Ë·‡ˆËÈ ÛÍÓflÚÍË (EN 1033) •Vrijednost vibracija na ručki (EN
1033) •Vrednost vibracij na ročaju (EN 1033) •Úroveň vibrácií na rukoväti (EN 1033) •Nivel de vibraţii pe mâner (EN 1033) •Rankenos vibracij vertò
(EN 1033) •Roktura vibrÇcijas l¥menis (EN 1033) •Käepideme vibratsiooni määr (EN 1033) •Vrednost vibracija na dršci (EN1033)
Hamburg
02-10-2006
S. KOMINAMI (Managing Director)
R. BERGFELD (Managing Director)
km/h
mm
max.
PM-5360 S3
51
B&S
60 RS /
PM-5365 S3
51
Honda
65 /
51
B&S
60 /
pro
(1)
mm
-
-
2400
-
2,8 ˜ 5
75
30/80
7
170/210
/
/
41
(2)
-
-
2400
-
2,8 ˜ 5
75
30/80
7
170/210
/
/
42
(3)
-
-
2400
-
2,8 ˜ 5
75
30/80
7
170/210
/
/
42
171505277/0
To find your local distributor,
please visit www.dolmar.com
DOLMAR GmbH
Postfach 70 04 20
D-22045 Hamburg
Germany
http://www.dolmar.com
• Kann ohne Vorankündigung geändert werden • Sujet à des modifications sans aucun
préavis • Subject to modifications without notice • Soggetto a modifiche senza preavviso • Kan zonder kennisgeving wijzigingen ondergaan • Sujeto a modificaciones sin previo aviso • Sujeito a alterações sem aviso prévio • ÀfiÎÂÈÙ·È Û ·ÏÏ·Á¤˜ ¯ˆÚ›˜
ÚÔÂȉÔÔ›ËÛË • Önceden haber verilmeksizin de¤ifltirilebilir • Kan utsättas för modifieringar utan att detta meddelas • Ret til ændringer forbeholdes • Voidaan tehdä muutoksia ilman ennakkoilmoitusta • Možnost změn bez předešlého upozornění •
Poddawany modyfikacjom bez awizowania • Előzetes értesítés nélkül módosítható •
åÓÊÂÚ ·˚Ú¸ ËÁÏÂÌÂÌÓ ·ÂÁ Ô‰‚‡ËÚÂθÌÓ„Ó Û‚Â‰ÓÏÎÂÌËfl • Podložno promjenama
bez prethodne obavijesti • Lahko pride do sprememb brez predhodnega obvestila •
Možnos zmien bez predošlého upozornenia • Poate fi modificat, fără preaviz • Objekto
pakeitimai be perspòjimo • Var tikt main¥ts bez iepriekšïja br¥dinÇjuma • Võimalikud
muudatused ilma ette teatamata • Podložno promenama bez prethodnog obaveštenja.
Form: 995 703 685 (10.06 D, F, GB, I, NL, E, P, GR, TR, S, DK,
FIN, CZ, PO, HU, RU, HR, SLO, SK, RO, LT, LV, EE, CS)