HOTPOINT/ARISTON XH8 T3Z XOZH/1, XH8 T3Z XOJZV, XH8 T3Z XOZH, XH9 T3Z XOJZH/1 User guide

XHX XXX XXXXX
XHX XXX XXXX
English
Operating Instructions
REFRIGERATOR/FREEZER COMBINATION
Contents
Operating Instructions, 1
Assistance, 3
Description of the appliance, 6
Description of the appliance, 11
Reversible doors, 16
Installation, 22
Start-up and use, 23
Maintenance and care, 24
Precautions and tips, 25
Troubleshooting, 25-26
Assistance
Before calling for Assistance:
• Check if the malfunction can be solved on your own (see
Troubleshooting).
• If after all the checks, the appliance still does not operate or
the problem persists, call the nearest Service Centre
Communicating:
• type of malfunction
• appliance model (Mod.)
• serial number (S/N)
This information can be found on the data plate located on the
bottom left side of the refrigerator compartment.
Never call on unauthorized technicians and always refuse
spare parts which are not originals.
Assistance
- serial number
- numéro de série
- modellnummer
- serienummer
- número de serie
- número de série
- numer seryjny
- număr de serie
3
Asistencia
Service
ESTAMOS A SU SERVICIO
- serial number
- numéro de série
- modellnummer
- serienummer
- número de serie
- número de série
- numer seryjny
- număr de serie
- serial number
- numéro de série
- modellnummer
- serienummer
- número de serie
- número de série
- numer seryjny
- număr de serie
5
6. FREEZER
and
temperature adjustment
Used to modify the temperature setting of the freezer; confirmation
corresponding to the selected temperature appears on the display.
7. SUPER FREEZE
Thanks to the Super Freeze + feature you can freeze in the suitable
compartment (see image below) “just cooked” foods (at a temperature
of 70°C). This freezing phase happens 50% faster than it would happen
on a standard freezer, and this offers immediate benefits on the food
consistency. Food tissues are further protected and bacterial growth
is avoided.At the end of the freezing process the temperature reverts
to the programmed level.
In order to get better results, we recommend that you enable this
feature 1 hour before you start inserting food inside the freezer
compartment.
This feature works for max. 24 hours.
10
3
4
5
10. SUPER COOL
1. ON/OFF
The entire product (both the refrigerator and freezer compartments)
may be switched on by pressing this button.
2. REFRIGERATOR
and
temperature adjustment
Used to modify the temperature setting of the refrigerator; confirmation
corresponding to the selected temperature appears on the display.
3. Refrigerator display
Shows the set temperature for the refrigerator compartment.
4. ALARM
An alarm situation has been detected in the product (see
Troubleshooting section).
5. FREEZER display
Shows the set temperature for the freezer compartment.
6
7
8
9
8. ECO*
Controls the activation and deactivation of the ECO
function (optimal operating temperature for minimal
energy consumption). Consumption will be optimised
24h after the function was enabled. When this function
is activated, the ECO LED on the keypad lights
up.Press and hold the ECO button for 8 seconds so
that the corresponding LED begins to flash; this will
allow you to set the temperature to in the Refrigerator
compartment and in the Freezer compartment. Two
minutes after the most recent user interaction, the
display enters its energy saving mode.To exit the
energy saving mode, simply press any button or open
the refrigerator door.
8. ACTIVE OXIGEN*
Device is activated pressing the dedicated key on the
display located in front of the fridge door.
By holding the Active Oxygen button for 8 seconds
you can enable the ECO feature.
9. HOLIDAY
Activates or deactivates the HOLIDAY function (the
HOLIDAY LED on the keypad lights up), while the
temperature values +12°C and -18°C appear on the
refrigerator and freezer displays respectively. Two
minutes after the most recent user interaction, the
display enters its energy saving mode (see ECO
function).
10. SUPER COOL
You can enable or disable the SUPER COOL feature
(quick cooling of both fresh and just cooked food).
On the keyboard the SUPER COOL LED turns on as
well as on the fridge display.
11. GOOD NIGHT
The Good Night function makes it possible to minimize
any noise, at the same time ensuring suitable storage
performance.
The compressor will be working at the minimum speed
that can be set.
When you start the function, the display enters into
standby mode and the relevant Good Night icon
lights up.
The Good Night function can automatically stop either
after maximum 6 hours or after the performance of
the product with the function ON can no longer be
ensured owing to a number of different reasons.
To stop the function manually press the button again
or switch off the device - we recommend starting
the function in the night hours or minimizing any
interaction with the fridge to prevent the function from
stopping automatically.
11
* Available only on certain models.
3
4
5
6
7
8
9
11
Bedieningspaneel
3
4
5
6
7
8
9
11
Painel de comandos
Panel kontrolny
3
4
5
6
7
8
9
11
10
10
3
4
5
6
7
8
9
11
Overall view
The instructions contained in this manual are applicable to different
model refrigerators. The diagrams may not directly represent the
appliance purchased. For more complex features, consult the
following pages.
1 Levelling FEET
2 STORAGE compartment*
3 FREEZER and STORAGE compartment
4 FRUIT and VEGETABLE bin *
5 COMPAR TMENT 3 IN 1 ZONE*
6 LAMP (see Maintenance).
7 WINE RACK *
8 SHELVES *
9 ACTIVE OXYGEN*
10 Extractable STORAGE shelf WITH COVER*
11 Removable multipurpose SHELVES *
12 BOTTLE shelf
*
Varies by number and/or position, available only on certain
models.
9
6
10
7
8
11
4
5
12
2
3
1
11
*
9
6
10
7
8
11
4
5
2
3
1
12
12
9
6
10
7
8
11
4
5
12
2
3
1
13
*
9
6
10
7
8
11
4
5
2
3
1
14
12
9
6
10
7
8
11
4
5
12
2
3
1
15
Reversible doors
If it is necessary to change the direction in which the doors open,
please contact the Technical Assistance Centre.
Draairichting deuren verwisselbaar
16
50mm
I
17
I
A
2
1
18
I
19
I
Sostituire la lampadina
3
Sicurezza generale
20
I
21
GB
Start-up and use
! Before placing your new appliance into operation please read
these operating instructions carefully. They contain important
information for safe use, for installation and for care of the
appliance.
! Please keep these operating instructions for future reference.
Pass them on to possible new owners of the appliance.
Starting the appliance
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to operate
correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the
appliance and any furniture above it, and at least 5 cm between
the sides and any furniture/side walls.
4. Place the device far from heat sources (direct sun light, electric
kitchen etc.)
! After transportation of the appliance, carefully place it in an
upright position and wait at least 3 hours before connecting it to
the electricity mains, to make sure it operates as it should.
• Clean the inside of the refrigerator well using warm water and
bicarbonate of soda before placing food inside it.
• The appliance comes with a motor protection control system
which makes the compressor start approximately 8 minutes
after being switched on. The compressor also starts each time
the power supply is cut off whether voluntarily or involuntarily
(blackout).
Freezer Compartment
When the product is switched on the freezer compartment is
set to its default value of -18°C. We recommend that the SUPER
FREEZE function is set (the freezer status bar continues to display
the set value) in order to accelerate the cooling process of the
compartment; when the inside of the compartment has reached
its optimal temperature the function will be deactivated and the
food may be placed inside.
Navigating the display
50mm
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by
tightening or loosening the front feet.
Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to the
electricity mains. Before inserting the plug into the electrical socket
ensure the following:
• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance,
• The voltage must be in the range between the values indicated
on the data plate located on the bottom left side (e.g. 220240V).
• The socket is compatible with the plug of the appliance. If
the socket is incompatible with the plug, ask an authorised
technician to replace it (see Assistance). Do not use extension
cords or multiple sockets.
! Once the appliance has been installed, the power supply cable
and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised
technicians only (see Assistance).
! The manufacturer declines any liability should these safety
measures not be observed.
22
Setting the temperatures:
If the product is switched on, the refrigerator and freezer
compartment displays will indicate the temperature values set at
that moment. To change them, simply press the - and + buttons
corresponding to the compartment for which you wish to change
the set temperature. More specifically, each time the buttons are
pressed, the temperature increases or decreases and the level of
cold generated inside the compartment is adjusted accordingly.
The temperature values that may be selected for the refrigerator
compartment are +8°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C,
while the values that may be set for the freezer are -18°C, -19°C,
-20°C, -21°C, -22°C, -23°,-24°C,-25°, and -26°C.
When the “ECO” function is active, the appliance automatically
adjusts the temperatures according to the conditions inside and
outside the refrigerator, in order to minimise the amount of energy
consumed; the activation of this function is signalled by the ECO
LED on the keypad lighting up.
When the HOLIDAY function is active the temperature may not
be adjusted, however the appliance adjusts itself automatically so
that the optimal settings for the situation are used: +12°C for the
refrigerator compartment and -18°C for the freezer compartment.
The activation of this function is indicated by the HOLIDAY LED
lighting up.
To activate and deactivate the functions, simply press the relevant
button; the function status will be signalled by the corresponding
LED on the keypad switching on or off.
Several of the functions (SUPER COOL, SUPER FREEZE, ECO)
are incompatible with others (HOLIDAY,...); remember that there
is a pre-established order of priority which will help you to operate
the product in the best possible way.
Cooling system
No Frost
The No Frost system circulates cold air continuously to collect
humidity and prevent ice and frost formation. The system maintains
an optimal humidity level in the compartment, preserving the
original quality of the food, preventing the food from sticking
together and making defrosting a thing of the past. Do not block
the aeration cells by placing food or containers in direct contact
with the refrigerating back panel. Close bottles and wrap food
tightly.
FRUIT and VEGETABLE bin*
The salad crispers fitted inside the fridge have been specially
designed for the purpose of keeping fruit and vegetables fresh and
crisp. Open the humidity regulator (position B) if you want to store
food in a less humid environment like fruit, or close it (position A)
to store food in a more humid environment like vegetable.
A
Using the refrigerator to its full potential
• Place only cold or lukewarm foods in the compartment•
Remember that cooked foods do not last longer than raw foods.
• Do not store liquids in open containers: they will increase the
level of humidity in the refrigerator and cause condensation to
form.
B
COMPARTMENT 3 IN 1 ZONE*
This is the new box which offers maximum flexibility in order to
stock your food in an excellent way.
-store meat, fish and delicate food;
-rapid cooling of hot food from 70°C to 3°C and of other fresh
foods and leftovers
-low temperature defrosting (it inhibits the proliferation of
microorganisms).
You can get the 0°C temperature, in standard conditions, when
the fridge compartment temperature is at about 4°C.
By decreasing the fridge temperature you decrease the CHILLER
compartment temperature too.
Coolsaver*
Certain fruits and vegetables generate ethylene as a natural part
of their ripening cycle. Other fruits and vegetables are highly
sensitive to the presence of ethylene, but may or may not produce
the ethylene themselves. Coolsaver maintains longer shelf life
with better food quality and fresher perishables by removing the
ethylene gas that causes premature ripening and decay.
SHELVES:
Due to the special guides the shelves are removable and the
height is adjustable allowing easy storage of large containers
and food. Height can be adjusted without complete removal of
the shelf. (see diagram),
Coolsaver also avoids cross transfer of odors and provides an
ideal environment in your refrigerator.
2
1
TEMPERATURE Indicator light*: to identify the coldest area in
the refrigerator.
1. Check that OK appears clearly on the indicator light (see
diagram).
2. If the word “OK” does not appear it means that the temperature
is too high: adjust the REFRIGERATOR OPERATION knob to a
higher position (colder) and wait approximately 10 hours until
the temperature has been stabilised.
3. Check the indicator light again: if necessary, readjust it following
the initial process. If large quantities of food have been added
or if the refrigerator door has been opened frequently, it is
normal for the indicator not to show OK. Wait at least 10 hours
before adjusting the REFRIGERATOR OPERATION knob to a
higher setting.
* Varies by
models.
number and/or position, available only on certain
High relative humidity is good for most perishable foods but
condensation is not. Coolsaver eliminates excess condensation
that causes mould, mildew and bacteriological growth on food.
Coolsaver is a 100% natural inorganic mineral and keeps its full
efficiency for several years. Considering the dust and humidity
around the Coolsaver during the normal use of the refrigerator,
it is recommended to recondition the Coolsaver periodically at
each 6 months to satisfy the full effectivity. Reconditioning is a
process of cleaning the Coolsaver bag with a vacuum cleaner
and then putting it under sunlight for around 6 hours or inside an
oven at 80 ˚C for 1 hour.
In order to keep the maximum effectivity and save the performance;
dust, oil or other liquids must be avoided to be in contact with the
Coolsaver. Such contact with these materials will cause reduction
or totally loss of the effectivity of the Coolsaver minerals and may
require replacement with a new one.
ACTIVE OXIGEN*
This device releases ozone molecules inside the refrigerator;
ozone is a natural substance which combats bacteria and
microorganisms, reducing their proliferation while limiting
unpleasant odours.Automatically defines the amount of ozone
required for prolonging the freshness of foodstuffs, eliminating
odours and preventing bacteria build-up.There may be a slight
distinctive odour inside the refrigerator. The very same smell
can sometimes be detected during a storm, due to the ozone
produced as the charge in the lightning bolts is released; this is
completely normal. The amount produced by the device is very
small and abates quickly as the antibacterial action takes place.
23
GB
GB
Using the freezer to its full potential
• Adjust the temperature using the display.
• Fresh food that needs to be frozen must not come into contact
with food that has already been defrosted. Fresh food must
be stored in the top FREEZER and STORAGE compartment
where the temperature drops below -18°C and guarantees
rapid freezing.
• To freeze fresh food in the best and safest way possible, activate
the SUPER FREEZE function 24 hours before placing the food
in the freezer. After placing the food inside, activate the SUPER
FREEZE function again; it will be deactivated automatically after
24 hours;
• Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24
hours).
• Do not place glass bottles which contain liquids, and which
are corked or hermetically sealed in the freezer because they
could break.
• The maximum quantity of food that may be frozen daily is
indicated on the plate containing the technical properties
located on the bottom left side of the refrigerator compartment
(for example: 2Kg/24h: ).
! To avoid blocking the air circulation inside the freezer
compartment, it is advisable not to obstruct the ventilation holes
with food or containers.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer
door. This will help maintain the temperature inside the freezer,
ensuring that foods are conserved for at least 12-18 hours.
!To maximise space inside the freezer, all drawers can be removed
from their positions and the food placed directly on the racks/glass
shelves supplied [where present].
* SUPER FREEZE +
This compartment is used to lower the temperature of freshly
cooked meals in a very rapid way, by allowing a freezing process
until the core of the food. The SUPER FREEZE + drawer is the
ideal solution to quickly freeze freshly cooked food as well as
food that you want to store in the freezer. Thanks to the rapidity
of the lowering phase, ice crystals will be smaller and they won’t
damage the food when it’s defrosted.
Optimal usage of the SUPER FREEZE + drawer
In order to make an optimal usage of the SUPER FREEZE + drawer,
you need to insert it on the lower shelf of the freezer compartment
(as per figure 1). Moreover, in order to obtain a rapid lowering
from +70°C to -18°C in about 4,5 hours (for 1 kg of food), position
the food inside the drawer and switch on the SUPER FREEZE +
feature on the Control Panel.
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect
the appliance from the electricity supply:
1. Press the ON/OFF button to switch off the appliance.
2. Pull the plug out of the socket.
! If this procedure is not followed, the alarm may sound. This alarm
does not indicate a malfunction. To restore normal operation,
hold the ON/OFF button down for more than two seconds. To
disconnect the appliance, follow points 1 and 2 above.
Cleaning the appliance
• The external and internal parts, as well as the rubber seals may
be cleaned using a sponge that has been soaked in lukewarm
water and bicarbonate of soda or neutral soap. Do not use
solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water and
soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner set
on medium power. The appliance must be switched off and
the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
and to prevent the formation of stains, food must always be
covered or sealed properly.
• If you want to switch the appliance off for an extended period
of time, clean the inside and leave the doors open.
Replace LED * light
The LED lighting, thanks to the powerful diffused light, allowes
a clear view of each food. If you need to replace the LED light,
contact theTechnical Service.
Replacing the light bulb *
To replace the light bulb in the refrigerator compartment, pull out
the plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power range
indicated on the cover.
3
* Varies by
models.
24
number and/or position, available only on certain
Precautions and tips
! The appliance was designed and manufactured in compliance
with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and
subsequent amendments;
- 2002/96/CE.
General safety
• The appliance was designed for domestic use inside the home
and is not intended for commercial or industrial use.
• The appliance must be used to store and freeze food products
by adults only and according to the instructions in this manual.
• The appliance must not be installed outdoors, even in covered
areas. It is extremely dangerous to leave the appliance
exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or moist
hands and feet.
• Do not touch the internal cooling elements: this could cause
skin abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug from the
mains socket, do not pull on the cable.
• Before cleaning and maintenance, always switch off the
appliance and disconnect it from the electrical supply. It is not
sufficient to set the temperature adjustment knobs on ON/OFF
(appliance off) to eliminate all electrical contact.
• In the case of a malfunction, under no circumstances should
you attempt to repair the appliance yourself. Repairs carried
out by inexperienced persons may cause injury or further
malfunctioning of the appliance.
• Do not use any sharp or pointed utensils or electrical equipment
- other than the type recommended by the manufacturer - inside
the frozen food storage compartments.
• Do not put ice cubes taken directly from the freezer into your
mouth.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or lack of experience
and knowledge unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
• Keep packaging material out of the reach of children! It can
become a choking or suffocation hazard.
• Observe local environmental standards when disposing
packaging material for recycling purposes.
• The European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be
collected separately in order to optimise the recovery and
recycling of the materials they contain and reduce the impact
on human health and the environment. The crossed out
“wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance it must be
separately collected. Consumers should contact their local
authority or retailer for information concerning the correct
disposal of their old appliance.
Respecting and conserving the environment
• Install the appliance in a fresh and well-ventilated room. Ensure
that it is protected from direct sunlight and do not place it near
heat sources.
• Try to avoid keeping the door open for long periods or opening
the door too frequently in order to conserve energy.
• Do not fill the appliance with too much food: cold air must
circulate freely for food to be preserved properly. If circulation
is impeded, the compressor will work continuously.
• Do not place hot food directly into the refrigerator. The internal
temperature will increase and force the compressor to work
harder and will consume more energy.
• Defrost the appliance if ice forms (see Maintenance). A thick
layer of ice makes cold transference to food products more
difficult and results in increased energy consumption.
Troubleshooting
If the appliance does not work, before calling for Assistance (see
Assistance), check for a solution from the following list.
The display is completely switched off.
• The plug has not been inserted into the electrical socket, or not
far enough to make contact, or there is no power in the house.
The motor does not start.
• The appliance comes with a motor protection control (see
Start-up and use).
The display is on but it is dim.
• Pull out and reverse the plug before putting it back in the socket.
The alarm sounds and DOOR OPEN ALARM flashes on the display
(flash the set temperature in the refrigerator).
• The refrigerator door has been open for more than two minutes.
The sound alert stops when the door is closed or when the
appliance is switched off and on again.
The alarm sounds and TEMPERATURE ALARM flashes on the
display (“A1” is displayed instead of the FREEZER temperature).
• The temperature inside the freezer is too high. The freezer will
maintain a temperature of around 0°C so that the food will not
refreeze, allowing you to eat it within 24 hours or to refreeze it
after it has been cooked.
To switch off the buzzer, open and close the appliance door
or press the + and – freezer temperature adjustment buttons
once. Press these buttons a second time to display the set
value on the freezer display, switch off the TEMPERATURE
ALARM LED and restore normal operation.
The alarm sounds and temperature alarm flashes on the display
(“A2” is displayed instead of the FREEZER temperature).
• The temperature of the freezer is dangerously high: the
food inside must not be eaten. The freezer will maintain a
temperature of approximately -18°C.
To switch off the buzzer, open and close the appliance door
or press the + and – freezer temperature adjustment buttons
once. Press these buttons a second time to display the set
value on the freezer display, switch off the TEMPERATURE
ALARM LED and restore normal operation.
The refrigerator and the freezer do not cool well.
• The doors do not close properly or the seals are damaged.
• The doors are opened too frequently.
• The temperature that has been set is too high (see Start-up and
use).
• The refrigerator or the freezer have been over-filled.
25
GB
GB
The food inside the refrigerator is beginning to freeze.
• The temperature that has been set is too low (see Start-up and
use).
The motor runs continuously.
• The SUPER FREEZE button has been pressed (rapid freezing):
the yellow SUPER FREEZE light is on or flashing (see
Description).
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
The appliance makes a lot of noise.
• The appliance has not been installed on a level surface (see
Installation).
• The appliance has been installed between cabinets that vibrate
and make noise.
• The internal refrigerant makes a slight noise even when the
compressor is off. This is not a defect, it is normal.
Early ending of functions
• Electrical disturbance on the network or brief interruptions of
the power supply.
26
50mm
27
F
F
A
2
1
28
F
3
29
F
30
F
31
D
50mm
32
A
2
1
*
33
D
D
*
34
3
35
D
D
36
NL
Gebruik van het display
50mm
Koelsysteem
No Frost
37
NL
Optimaal gebruik van de koelkast
A
2
1
38
Optimaal gebruik van de diepvrieskast
NL
39
NL
Vervang de LED * lamp
40
NL
41
E
50mm
42
2
1
A
43
E
E
44
Sustituir la bombilla *
3
Remplazar la luz LED*
45
E
E
46
50mm
P
47
P
A
2
1
48
P
49
P
3
50
P
51
PL
Instalacja
50mm
52
2
1
A
*
53
PL
PL
*
54
55
PL
PL
56
Instalare
RO
50mm
Sistem de răcire
No Frost
57
RO
2
1
58
A
RO
59
RO
Lichidare aparat
60
RO
61
RO
62
RO
63
W11153630
08/2017
RO
64