Millennium Stereo One-fifty User manual

Millennium Stereo One-fifty is a powerful and versatile integrated amplifier that is perfect for a wide range of applications. With its 150 watts of power per channel, it can easily drive even the most demanding speakers. The Stereo One-fifty also features a variety of inputs and outputs, making it easy to connect to your favorite sources and components. Whether you're looking for an amplifier for your home stereo system or for your professional audio rig, the Stereo One-fifty is a great choice.

PDF
Document
Millennium Stereo One-fifty User manual | Manualzz

Advertisement

Advertisement

Integrated Modeling Amplifier
Please visit Johnson Amplification on the World Wide Web at http://www.digitech.com
User’s Guide
WARNING
FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE: Appliance should not be used near water (e.g. near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care
should be taken so that objects do not fall and liquids are not spilled into the enclosure
through openings.
POWER SOURCES: The appliance should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding
or polarization means of an appliance is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from the
appliance.
SERVICING: To reduce the risk of fire or electric shock, the user should not attempt to
service the appliance beyond that described in the operating instructions. All other servicing
should be referred to qualified service personnel.
FOR UNITS EQUIPPED WITH EXTERNALLY ACCESSIBLE FUSE
RECEPTACLE: Replace fuse with same type and rating only.
SAFETY INSTRUCTIONS
NOTICE FOR CUSTOMERS IF YOUR UNIT IS EQUIPPED WITH A
POWER CORD.
WARNING: THIS APPLIANCE MUST BE EARTHED.
The cores in the mains lead are coloured in accordance with the following code:
GREEN and YELLOW - Earth BLUE - Neutral BROWN - Live
As colours of the cores in the mains lead of this appliance may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows:
• The core which is coloured green and yellow must be connected to the
terminal in the plug marked with the letter E, or with the earth symbol, or
coloured green, or green and yellow.
• The core which is coloured blue must be connected to the terminal marked N
or coloured black.
• The core which is coloured brown must be connected to the terminal marked
L or coloured red.
This equipment may require the use of a different line cord, attachment plug, or both,
depending on the available power source at installation. If the attachment plug needs
to be changed, refer servicing to qualified service personnel who should refer to the
table below. The green/yellow wire shall be connected directly to the unit's chassis.
WARNING: If the ground is defeated, certain fault conditions in the unit or in the
system to which it is connected can result in full line voltage between chassis and
earth ground. Severe injury or death can then result if the chassis and earth ground are
touched simultaneously.
Line
Neutral
Earth Grnd.
CONDUCTOR
L
N
Brown
Blue
Green/Yel.
Black
WIRE COLOR
White
Green
U.K. MAINS PLUG WARNING
A moulded mains plug that has been cut off from the cord is unsafe. Discard the mains
plug at a suitable disposal facility. NEVER UNDER ANY CIRCUMSTANCES
SHOULD YOU INSERT A DAMAGED OR CUT MAINS PLUG INTO A 13
AMP POWER SOCKET. Do not use the mains plug without the fuse cover in place.
Replacement fuse covers can be obtained from your local retailer. Replacement fuses
are 13 amps and MUST be ASTA approved to BS1362.
The symbols shown above are internationally accepted symbols that warn of potential
hazards with electrical products.The lightning flash with arrowpoint in an equilateral
triangle means that there are dangerous voltages present within the unit.The
exclamation point in an equilateral triangle indicates that it is necessary for the user to
refer to the owner’s manual.
These symbols warn that there are no user serviceable parts inside the unit. Do not
open the unit. Do not attempt to service the unit yourself. Refer all servicing to
qualified personnel. Opening the chassis for any reason will void the manufacturer’s
warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately
and take it to a dealer for service. Disconnect the unit during storms to prevent
damage.
C A U T I O N
A T T E N T I O N : R I S Q U E D E C H O C E L E C T R I Q U E - N E P A S O U V R I R
W A R N I N G : T O R E D U C E T H E R I S K O F F I R E O R E L E C T R I C
S H O C K D O N O T E X P O S E T H I S E Q U I P M E N T T O R A I N O R M O I S T U R E
R I S K O F E L E C T R I C S H O C K
D O N O T O P E N
LITHIUM BATTERY WARNING
CAUTION!
This product may contain a lithium battery.There is danger of explosion if the battery is
incorrectly replaced. Replace only with an Eveready CR 2032 or equivalent. Make sure
the battery is installed with the correct polarity. Discard used batteries according to
manufacturer’s instructions.
ADVARSEL!
Lithiumbatteri - Eksplosjonsfare.Ved utskifting benyttes kun batteri som anbefalt av
apparatfabrikanten. Brukt batteri returneres apparatleverandøren.
ADVARSEL!
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med
batteri av samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.
VAROITUS!
Paristo voi räjähtää, jos se on virheellisesti asennettu.Vaihda paristo ainoastaan laite-
valmistajan suosittelemaan tyyppin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
VARNING!
Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ
som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens
instruktion.
ELECTROMAGNETIC COMPATIBILITY
This unit conforms to the Product Specifications noted on the Declaration of
Conformity. Operation is subject to the following two conditions:
• this device may not cause harmful interference, and
• this device must accept any interference received, including interference that
may cause undesired operation. Operation of this unit within significant elec-
tromagnetic fields should be avoided.
• use only shielded interconnecting cables.
DECLARATION OF CONFORMITY
Manufacturer’s Name: Johnson Amplification
Manufacturer’s Address: 8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product:
Product Name: Johnson Millennium Stereo 150
Product Options: All
conforms to the following Product Specifications:
Safety: EN 60065 (1993)
IEC 65 (1985) with Amendments 1, 2 & 3
EMC: EN 55013 (1990)
EN 55020 (1991)
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and EMC
Directive 89/336/EEC as amended by Directive 93/68/EEC.
.
Johnson Amplification
President of Johnson Amplification
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Tel: 801.566.8800
Fax: 801.566.7005
Effective June 15, 1997
European Contact: Your Local Johnson Amplification Sales and Service Office or
International Sales Office
3 Overlook Drive #4
Amherst, New Hampshire 03031, USA
Tel: 603.672.4244
Fax: 603.672.4246
Johnson Millennium
User Guide I
Quick Start
For those of you who prefer to burn now and read later, we've included this Quick Start section to get you up and running.
Connect Cables:
Connect guitar into the Bright or Normal input jacks. If an extension cabinet is to be used, connect an un-shielded speaker cable to the
extension speaker cabinet output (located on the rear panel of the Millennium) and run into the desired extension speaker cabinet (such as the
Johnson Amplification 2-12 HB) with a 4ohm minimum requirement per channel .
Connect J-3 Multi-Function Footswitch:
Connect the included J-3 Footswitch to the J-3 insert on the rear panel of the Millennium. The three footswitches can be programmed to
perform several functions. From the factory, the footswitches will A-B Channel Switch and change presets Up and Down.
Connect Johnson Amplification J-12 Foot Controller (if applicable)
Connect the output of the optional Johnson Amplification J-12 to the Foot Controller jack found on the rear of the Millennium. Make sure that
connection is made before applying power to the Millennium.
WARNING: DO NOT CONNECT ANYTHING BUT THE OPTIONAL JOHNSON AMPLIFICATION J-12 FOOT CONTROLLER TO THE FOOT
CONTROLLER JACK ON THE REAR PANEL! DOING SO MAY DAMAGE THE DEVICE.
MIDI control of the Millennium can be done by connecting MIDI controller devices to the MIDI In jack on the rear panel.
Apply Power:
Note: When applying power to the Millennium, it is recommended that the <Input> and <Master Volume> be turned down prior to
powering up the unit.
Adjust Input and Output:
Use the <Input> level knob on the front panel to adjust the Input level, so that the loudest guitar signal occasionally lights the clip LED
indicator. Now adjust the <Master Volume> level knob on the front panel of the Millennium to the desired output level .
Select Preset:
Begin playing your guitar, and choose any preset using the <Preset/Effect> wheel. User Presets 1-100 are duplicates of the Factory Presets.
They are user-programmable. You can modify and store them as you want. Factory Presets 1-100 are not user-programmable and cannot be
overwritten.
Johnson Millennium
User GuideII
/

Advertisement

Key features

  • 150 watts of power per channel

  • Variety of inputs and outputs

  • Headphone output

  • Built-in EQ

  • Compact and lightweight

Frequently asked questions

The Millennium Stereo One-fifty has 150 watts of power per channel.

The Millennium Stereo One-fifty has a variety of inputs and outputs, including XLR, TRS, and RCA.

Yes, the Millennium Stereo One-fifty has a headphone output.

Yes, the Millennium Stereo One-fifty has a built-in EQ.

Yes, the Millennium Stereo One-fifty is compact and lightweight.

User questions

M J

Michael M.

How to assign functions to the foot pedals?

No votes

The Johnson Amplification J-12 foot controller has two built-in expression pedals which can be assigned to control any parameter of the Millennium. The J-3 footswitch included with the Millennium has three footswitches that can be assigned to perform several different functions. By default, the J-3 will change presets Up and Down and will A-B channel switch. You can change these footswitch functions on Pages 14 and 15 of the Utility menu.

Preparing document for printing…
0%