Earthquake K33 CHIPPER SHREDDER TAZZ VIPER 301CC Operator's Manual
Reklaam
Reklaam
ENGLISH
Owner’s Manual
CHIPPER SHREDDER
Model #’s: 18493 / 22752 /
22754 / 30520 / 32013
GAS/OIL
RATIO
50:1
Get parts or technical assistance online at
www.GetEarthquake.com or call (800) 345-6007
© 2018 Ardisam
All Rights Reserved
P/N: 32409
REV 1: 08/29/2018THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
SERIAL NO.
DATE OF PURCHASE:
Owner’s Manual
CHIPPER SHREDDER
Model #’s: 18493 / 22752 /
22754 / 30520 / 32013
GAS/OIL
RATIO
50:1
Get parts or technical assistance online at
www.GetEarthquake.com or call (800) 345-6007
© 2018 Ardisam
All Rights Reserved
P/N: 32409
REV 1: 08/29/2018THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
SERIAL NO.
DATE OF PURCHASE:
2Owner’s Manual
CHIPPER SHREDDER
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST
INTRODUCTION
Thank you for purchasing your product from Earthquake®. We have worked to ensure that this product meets the highest stan-
dards for usability and durability. With proper care, your purchase will provide many years of service.
Please read this entire manual before installation and use. Earthquake® reserves the right to change, alter or improve the product
and this document at any time without prior notice. Due to continuous product improvements, product images may not be exact.
Some assembly may be required.
Read and keep this manual for future reference. This manual contains important information regarding safety, assembly, operation
and maintenance. The owner must be certain that all the product information is included with the unit. This information includes
the manual, the replacement parts and the warranties. This information must be included to make sure state laws and other laws
are followed. All persons to whom rent/loan this unit must have access to and understand this information. This manual should
remain with the product even if it is resold.
CONTENTS
Introduction/Contents ..................................................................................................................................................................................................................2
Bolt Identification Chart................................................................................................................................................................................................................3
Warnings and Safety Precautions .......................................................................................................................................................................................... 4-9
Features ............................................................................................................................................................................................................................................10
Specifications ..................................................................................................................................................................................................................................11
Unpacking and Assembly ................................................................................................................................................................................................... 12-14
Operation .................................................................................................................................................................................................................................. 15-16
Maintenance and Storage ................................................................................................................................................................................................... 17-19
Troubleshooting and Repair............................................................................................................................................................................................... 20-22
STOP! ACTIVATE YOUR WARRANTY BEFORE USE
All products must be registered within 30 days from the date of purchase in order to be covered under
warranty. For more information regarding Warranty and Registration please review the Warranty and Regis-
tration terms and conditions expressed in the warranty insert.
REGISTRATION AND SERVICE
Record the product model number and serial number in the
space provided for easy reference when ordering parts or
requesting technical support. Excluding emissions-related
warranty items, the warranty is valid only if the completed
registration is received by Ardisam within 30 days of pur-
chase. You can register your warranty online by visiting www.
GetEarthquake.com, or by mailing it to: Ardisam, 1160 8th
Avenue, Cumberland, WI 54829. You may also call our Custom-
er Service department at (800) 345-6007 Mondays through
Fridays from 8 a.m. to 5 p.m. CST.
Serial
Number
Decal
CHIPPER SHREDDER
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST
INTRODUCTION
Thank you for purchasing your product from Earthquake®. We have worked to ensure that this product meets the highest stan-
dards for usability and durability. With proper care, your purchase will provide many years of service.
Please read this entire manual before installation and use. Earthquake® reserves the right to change, alter or improve the product
and this document at any time without prior notice. Due to continuous product improvements, product images may not be exact.
Some assembly may be required.
Read and keep this manual for future reference. This manual contains important information regarding safety, assembly, operation
and maintenance. The owner must be certain that all the product information is included with the unit. This information includes
the manual, the replacement parts and the warranties. This information must be included to make sure state laws and other laws
are followed. All persons to whom rent/loan this unit must have access to and understand this information. This manual should
remain with the product even if it is resold.
CONTENTS
Introduction/Contents ..................................................................................................................................................................................................................2
Bolt Identification Chart................................................................................................................................................................................................................3
Warnings and Safety Precautions .......................................................................................................................................................................................... 4-9
Features ............................................................................................................................................................................................................................................10
Specifications ..................................................................................................................................................................................................................................11
Unpacking and Assembly ................................................................................................................................................................................................... 12-14
Operation .................................................................................................................................................................................................................................. 15-16
Maintenance and Storage ................................................................................................................................................................................................... 17-19
Troubleshooting and Repair............................................................................................................................................................................................... 20-22
STOP! ACTIVATE YOUR WARRANTY BEFORE USE
All products must be registered within 30 days from the date of purchase in order to be covered under
warranty. For more information regarding Warranty and Registration please review the Warranty and Regis-
tration terms and conditions expressed in the warranty insert.
REGISTRATION AND SERVICE
Record the product model number and serial number in the
space provided for easy reference when ordering parts or
requesting technical support. Excluding emissions-related
warranty items, the warranty is valid only if the completed
registration is received by Ardisam within 30 days of pur-
chase. You can register your warranty online by visiting www.
GetEarthquake.com, or by mailing it to: Ardisam, 1160 8th
Avenue, Cumberland, WI 54829. You may also call our Custom-
er Service department at (800) 345-6007 Mondays through
Fridays from 8 a.m. to 5 p.m. CST.
Serial
Number
Decal
3Owner’s Manual
CHIPPER SHREDDER
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST
BOLT IDENTIFICATION CHART
Bolts shown are for size reference only. Extra hardware may be
included in the parts bag.
TOOLS NEEDED - NOT INCLUDED
(A)
M8 x 40 MM Bolt
Qty 4
(B)
M8 x 20 MM Flange Bolt
Qty 4
(C)
M6 x 16 MM Bolt
Qty 3
(F)
M6 Spring Lock Washer
Qty 3
(E)
M8 Washer
Qty 12
10 MM Wrench - Qty 1
8 MM Wrench - Qty 1
(D)
12 X 24 MM Washer
Qty 2
(G)
M8 Nut
Qty 8
(H)
M8 Nyloc Nut
Qty 3
(I)
M6 Nut
Qty 3
CHIPPER SHREDDER
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST
BOLT IDENTIFICATION CHART
Bolts shown are for size reference only. Extra hardware may be
included in the parts bag.
TOOLS NEEDED - NOT INCLUDED
(A)
M8 x 40 MM Bolt
Qty 4
(B)
M8 x 20 MM Flange Bolt
Qty 4
(C)
M6 x 16 MM Bolt
Qty 3
(F)
M6 Spring Lock Washer
Qty 3
(E)
M8 Washer
Qty 12
10 MM Wrench - Qty 1
8 MM Wrench - Qty 1
(D)
12 X 24 MM Washer
Qty 2
(G)
M8 Nut
Qty 8
(H)
M8 Nyloc Nut
Qty 3
(I)
M6 Nut
Qty 3
4Owner’s Manual
CHIPPER SHREDDER
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST
NOTICE
NOTICE INDICATES YOUR EQUIPMENT CAN BE DAMAGED
IF THE SAFETY INSTRUCTIONS THAT FOLLOW THIS SIGNAL
WORD ARE NOT OBEYED.
WARNINGS AND SAFETY PRECAUTIONS
OWNER’S RESPONSIBILITY
Accurate assembly and safe and effective use of the machine is
the owner’s responsibility.
• Read and follow all safety instructions.
• Carefully follow all assembly instructions.
• Maintain the machine according to directions and
schedule included in this Earthquake® operator’s manual.
• Ensure that anyone who uses the machine is familiar with
all controls and safety precautions.
SPECIAL MESSAGES
Your manual contains special messages to bring attention to
potential safety concerns, machine damage as well as helpful
operating and servicing information. Please read all the infor-
mation carefully to avoid injury and machine damage.
NOTE: General information is given throughout the manual
that may help the operator in the operation or service of the
machine.
This symbol points out important safety instructions
which if not followed could endanger your personal
safety. Read and follow all instructions in this manual
before attempting to operate this equipment.
BEFORE OPERATING EQUIPMENT:
Please read this section carefully. Read entire operating and
maintenance instructions for this product. Failure to follow in-
structions could result in serious injury or death. Operate the
machine according to the safety instructions outlined here and
inserted throughout the text. Anyone who uses this machine
must read the instructions and be familiar with the controls.
CAUTION
CAUTION INDICATES A HAZARD WHICH, IF NOT AVOIDED,
COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE.
WARNING
WARNING INDICATES A HAZARD WHICH, IF NOT AVOIDED,
COULD RESULT IN DEATH OR SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
DANGER
DANGER INDICATES A HAZARD WHICH, IF NOT AVOIDED,
CERTAINLY WILL RESULT IN DEATH OR SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
IMPORTANT
IMPORTANT INDICATES HELPFUL INFORMATION FOR
PROPER ASSEMBLY, OPERATION OR MAINTENANCE OF
YOUR EQUIPMENT.
WARNING
YOU MUST READ, UNDERSTAND AND COMPLY WITH ALL
SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO SETUP AND OPERATE YOUR
MACHINE.
FAILURE TO COMPLY WITH ALL SAFETY AND OPERATING
INSTRUCTIONS CAN RESULT IN LOSS OF MACHINE
CONTROL, SERIOUS PERSONAL INJURY TO YOU AND/OR
BYSTANDERS, AND RISK OF EQUIPMENT AND PROPERTY
DAMAGE. THE TRIANGLE IN THE TEXT SIGNIFIES
IMPORTANT CAUTIONS OR WARNINGS WHICH MUST BE
FOLLOWED.
CHIPPER SHREDDER
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST
NOTICE
NOTICE INDICATES YOUR EQUIPMENT CAN BE DAMAGED
IF THE SAFETY INSTRUCTIONS THAT FOLLOW THIS SIGNAL
WORD ARE NOT OBEYED.
WARNINGS AND SAFETY PRECAUTIONS
OWNER’S RESPONSIBILITY
Accurate assembly and safe and effective use of the machine is
the owner’s responsibility.
• Read and follow all safety instructions.
• Carefully follow all assembly instructions.
• Maintain the machine according to directions and
schedule included in this Earthquake® operator’s manual.
• Ensure that anyone who uses the machine is familiar with
all controls and safety precautions.
SPECIAL MESSAGES
Your manual contains special messages to bring attention to
potential safety concerns, machine damage as well as helpful
operating and servicing information. Please read all the infor-
mation carefully to avoid injury and machine damage.
NOTE: General information is given throughout the manual
that may help the operator in the operation or service of the
machine.
This symbol points out important safety instructions
which if not followed could endanger your personal
safety. Read and follow all instructions in this manual
before attempting to operate this equipment.
BEFORE OPERATING EQUIPMENT:
Please read this section carefully. Read entire operating and
maintenance instructions for this product. Failure to follow in-
structions could result in serious injury or death. Operate the
machine according to the safety instructions outlined here and
inserted throughout the text. Anyone who uses this machine
must read the instructions and be familiar with the controls.
CAUTION
CAUTION INDICATES A HAZARD WHICH, IF NOT AVOIDED,
COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE.
WARNING
WARNING INDICATES A HAZARD WHICH, IF NOT AVOIDED,
COULD RESULT IN DEATH OR SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
DANGER
DANGER INDICATES A HAZARD WHICH, IF NOT AVOIDED,
CERTAINLY WILL RESULT IN DEATH OR SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
IMPORTANT
IMPORTANT INDICATES HELPFUL INFORMATION FOR
PROPER ASSEMBLY, OPERATION OR MAINTENANCE OF
YOUR EQUIPMENT.
WARNING
YOU MUST READ, UNDERSTAND AND COMPLY WITH ALL
SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO SETUP AND OPERATE YOUR
MACHINE.
FAILURE TO COMPLY WITH ALL SAFETY AND OPERATING
INSTRUCTIONS CAN RESULT IN LOSS OF MACHINE
CONTROL, SERIOUS PERSONAL INJURY TO YOU AND/OR
BYSTANDERS, AND RISK OF EQUIPMENT AND PROPERTY
DAMAGE. THE TRIANGLE IN THE TEXT SIGNIFIES
IMPORTANT CAUTIONS OR WARNINGS WHICH MUST BE
FOLLOWED.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Reklaam
Seotud
Great Circle LCE01 Instruction Manual
Braber Equipment 9275256 4 in. Gas Wood Chipper Owner's Manual
Earthquake K52 CHIPPER SHREDDER TAZZ KOHLER 196CC Operator's Manual
Tazz 35259 Chipper Shredder Manual + AI Chat
BE Ag & Industrial BE-WCGR4H13 Manual
Earthquake Chipper/Shredder User Manual
Simplicity 2/10, 3/10, 5/10 Chipper/Shredder Operator's Manual
MACKISSIC SC300M Owner's Manual
Powerhorse 63388 Wood Chipper Manual + AI Chat
Earthquake 23666 CHIPPER SHREDDER EQ 212CC Owner's Manual
