qingping B08RYRRYR1 Qingping Thermometer Hygrometer Sensor User Manual

Qingping B08RYRRYR1 is not mentioned in the provided document. The document describes the Qingping Temp & RH Monitor T. This device measures temperature and humidity, displaying readings on an e-ink screen. It connects to Apple Home and Qingping+ apps for data viewing and firmware updates. It offers both Thread and Bluetooth connectivity, depending on the home hub. The device can be wall-mounted or placed on a desktop.

PDF

Document

This manual may be updated, this version is v1.0.
Qingping Technology (Beijing) Co., Ltd.
Address: 309, Block C, Yeqing Mansion, No.9 Wangjing North Street,
Chaoyang District, Beijing 100102, China
Website: qingping.co
Email: [email protected]
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
45°
Temp & RH Monitor T
User Manual
Thank you for using Qingping Temp & RH Monitor T.
Desktop Mode
By opening the back cover halfway (at the angle of 45° to the body), Qingping Temp & RH
Monitor T can be placed on the desktop:
* Please avoid placing the product on surfaces of suede or particles to prevent the vent
hole at the bottom of the product from being clogged and resulting in inaccurate
measurement.
If the screen doesn't display anything, the battery needs to be replaced.
* After removing the battery, the content may still be displayed on the screen, it's normal.
The product uses an e-ink screen, the content displayed on it can be kept for a while
without power supply.
Insert or Replace Battery
Qingping Temp & RH Monitor T uses a CR2430 button cell.
Fully open the back cover (at an angle of 90° to the body), and then hold the battery
cover with both thumbs and push it counterclockwise to unscrew the battery cover:
Attention
Wall Mode
There is a wall sticker in the package, and the double-sided tap is stuck on the back of it:
FAQ
Performance Faults
Connect to "Home"
The content displayed on the screen is incomplete or the screen cannot
display content.
No response when the button is pressed.
The sensor is not working properly.
Remove the film of the double-sided tape, stick the wall sticker to your selected position,
and then attach Qingping Temp & RH Monitor T:
Open the Home app on your iOS or iPadOS device, and tap "+", then select "Add or Scan
Accessory", and then follow the instructions the app shows.
* If failed to add, please reset this product and try again. Please refer to "Reset Factory
Settings" of this manual.
Use of the Works with Apple badge means that an accessory has been designed to work
specifically with the technology identified in the badge and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards.
Connect to "Qingping+"
You can also use the mobile app "Qingping+" to connect this product, to view the
readings, access the historical data, and upgrade the firmware, etc.
You can visit qingping.co/plus or scan the QR code below to download the app:
Or search "Qingping+" on App Store or Google Play.
After installing the app, please open it and add a device, select "Qingping Temp & RH
Monitor T", and then follow the instructions the app shows.
* If you have added your Qingping Temp & RH Monitor T in Home app, then it will appear
in Qingping+ app automatically, no need to add again.
* While Qingping+ app is opened and connected to your Qingping Temp & RH Monitor T,
it will sync the 30-day historical data automatically.
* This product doesn't support connecting to Android devices.
Item
Temperature
Humidity
0 ~ 50°C
0 ~ 99.9%
Range
Measuring Item and Ranges
Specifications
The temperature that a human body perceives depends on many factors such as air
temperature, relative humidity, wind velocity, physical activity and condition, or even the
clothes worn.
In winter, the human body feels more comfortable when the temperature is between
20 ~ 24°C while the humidity is between 30 ~ 60%; in summer, the range is respectively
23 ~ 26°C and 25 ~ 60%.
Model: CGG1T
Weight: 54 g
Size: Diameter 74 mm, thickness 14 mm
Screen Size: Diameter 55 mm
Wireless Connectivity: Thread, Bluetooth
Battery Type: CR2430 button cell
FCC ID: 2AQ3F-CGG1T
Non-warranty
1. Unauthorized repair, misuse, collision, negligence, abuse, liquid injection, accident,
alteration, improper use of accessories not originally supplied with this product.
2. The warranty period has expired.
3. Damage caused by force majeure.
4. The situation does not meet the fault listed in the Performance Faults.
Warranty
In the countries and regions where Qingping Technology (Beijing) Co., Ltd. has
established branches or after-sales service centers, we provide a 1-year limited warranty
service for the locally sold Qingping Temp & RH Monitor T. The warranty service terms
are:
1. Within 7 days from the date of the receipt, if the product has faults listed in the
“Performance Faults”, after the faults are confirmed by our after-sales service
department, the customer can have a refund or a replacement the product for free.
2. From the 8th to the 15th day after the receipt, if the product has faults listed in the
“Performance Faults”, after the faults are confirmed by our after-sales service
department, the customer can have a replacement or repair service for free.
3. Within 12 months from the date of receipt, if the product has faults listed in the
“Performance Faults”, after the faults are confirmed by our after-sales service
department, the customer can have the maintenance service for free.
In countries or regions where Qingping Technology (Beijing) Co., Ltd. has not established
a branch or after-sales service center, please contact the local seller if you have any
quality problems.
Do not block the vent hole on the bottom of the product.
This product is not waterproof or dustproof.
Do not use in an environment with humidity greater than 90% for a long
time.
Do not throw the battery or the product with the battery into the fire to
avoid an explosion.
Do not disassemble the product by yourself to avoid injury.
Question/Problem Answer/Solution
1. When the environment changes drastically, for example,
after just moved from outdoor to indoors, it needs about 10
minutes for the readings to approach the actual values of
the new environment.
2. When the product is held in hand, the temperature of the
human body will effect the readings, resulting in difference
between the readings and the actual values of the
environment.
3. Check if the vent hole at the bottom of the product is
clogged. If it is clogged, please clean it carefully, and avoid
damaging the sensor.
Readings
inaccurate.
The environment temperature exceeded the measurement
range of the product. Please put the product in a normal
indoor environment.
E1 shows on
the screen.
The product uses an e-ink screen, which needs to be
completely refreshed after being partly refreshed several
times. When it's being completely refreshed, the screen
will turn to black and then return to normal immediately.
The screen turns
black occasionally
and then returns
to normal.
Please refer to the instruction "Insert or Replace Battery"
of this manual.
The screen doesn't
show anything.
The product uses an e-ink screen that keeps display
the content for a while after the battery is removed.
The screen still
displays readings
after the battery is
removed.
Error Codes
Error Code on the Screen Meaning/Solution
The environment temperature exceeded
the measurement range of the product.
The sensor is malfunctioning.
E1
E2
Thread Mode and Bluetooth Mode
Usually, this product will automatically connect to the home hub via Thread. If it is not
connected, you can press the button on the back of the product to make it try
connecting the home hub:
Switch the Temperature Unit
The temperature unit displayed on the product's screen can be switched between
Celsius (°C) and Fahrenheit (°F).
Restore Factory Settings
Press and hold the button on the back of the product, and release after the screen
displays "188", and then wait for the product return to display correct temperature and
humidity readings, which means that the restoration of factory settings has been
completed.
Press the button on the back of the product to switch the temperature unit, and let it try
to connect to the home hub via Thread.
* "Home Hub" refers to Apple Home Hub devices, such as HomePod, HomePod mini,
Apple TV (fourth generation or newer models); Some home hub devices have Thread
connection capability, such as HomePod mini, Apple TV 4K second generation, and
Apple TV 4K third generation with Ethernet port.
Apple Home, HomePod, HomePod mini, and Apple TV are trademarks of Apple Inc.,
registered in the U.S. and other countries and regions.
If the home hub has no Thread, the product will work in Bluetooth mode.
When working in Thread mode, the screen displays the Thread icon:
At this time, the product will not always display the remaining battery level. To check the
remaining battery level, please press the button on the back of the product:
When working in Bluetooth mode, the screen displays the Bluetooth icon and the
remaining battery level:
Wir Qingping Technology (Beijing) Co., Ltd. erklären hiermit, dass
dieses Gerät den geltenden Richtlinien und europäischen Normen
und Ergänzungen entspricht.
BARQUETTE
ÉTUI
FR

Hello! I am an AI chatbot specifically trained to assist you with the Qingping B08RYRRYR1 User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts