advertisement
Important Safety Instructions
SAVE THESE INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
AVIS : RISQUE DE CHOC ELECTRIQUE
- NE PAS OUVRIR.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the leterature accompanying the product.
Examples of Picture Symbols
denotes that care should be taken.
The example instructs the user to take care not to allow fingers to be trapped.
denotes a prohibited operation.
The example instructs that disassembly of the product is prohibited.
denotes an operation that should be carried out.
The example instructs the user to remove the power cord plug from the AC outlet.
Read all the instructions before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or object have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Règles de sécurité
(Supplémentairespour le Canada)
CONSERVEZ CES INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVERTISSEMENT
POUR REDUIRE LES RISQUES
D’INCENDIE OU D’ELECTROCUTION,
PROTEGEZ CET APPAREIL DE LA
PLUIE OU DE L’HUMIDITE.
AVIS : RISQUE DE CHOC ELECTRIQUE
- NE PAS OUVRIR.
POUR REDUIRE LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE DEMONTEZ PAS LE COUVERCLE
(OU L’ARRIERE). A L’INTERIEUR, AUCUNE PARTIE N’EST REPARABLE PAR L’UTILISATEUR.
POUR LA MAINTENANCE, ADRESSEZ-VOUS A DU PERSONNEL QUALIFIE.
Le symbole de l’éclair avec une pointe de flèche à l’intérieur d’un triangle équilatéral met en garde l’utilisateur contre la présence de tension dangereuse, non isolée, à l’intérieur de l’appareil, dont l’amplitude peut être suffisante pour induire un risque d’électrocution d’une personne.
Le point d’exclamation à l’intérieur d’un triangle
équilatéral alerte l’utilisateur de la présence de règles d’utilisation et d’entretien importantes dans la notice qui accompagne l’appareil.
Exemples de symboles graphiques
Indique que des précautions doivent être prises.
L’exemple indique à l’utilisateur qu’il doit faire attention à ne pas se faire coincer les doigts.
Indique une manipulation interdite.
L’exemple indique que le démontage de l’appareil est interdit.
Indique qu’une manipulation doit être effectuée.
L’exemple indique à l’utilisateur qu’il doit débrancher le câble d’alimentation de la prise secteur.
AVERTISSEMENT
Faite attention de ne pas introduire un produit étranger à l’intérieur de l’appareil.
Ce produit n’est pas totalement déconnecté du circuit électrique lorsqu’il est mis hors tension par le bouton d’arrêt. Si l’appareil ne doit pas être utilisé pendant une longue période, débranchez le câble d’alimentation de la prise secteur.
Indique un risque potentiel qui peut entraîner la mort, ou de graves lésions, si l’appareil n’est pas manipulé correctement.
L’introduction d’eau, d’aiguilles ou d’épingles à cheveux, peut provoquer une panne ou un court-circuit. Ce produit doit être mis à l’abri des
écoulements ou projections d’eau. Ne jamais placer sur le produit des objets contenant des liquides, tels que des vases ou autres récipients.
Si vous ne le faisiez pas la foudre pourrait provoquer un incendie.
Si vous ne le faisiez pas, la surchauffe de l’appareil pourrait provoquer un incendie.
Il est recommandé de placer l’instrument à proximité de la prise de courant et de positionner le câble d’alimentation secteur de sorte qu’il puisse être débranché rapidement en cas d’urgence, le courant électrique étant toujours présent tant que la prise est branchée même si le bouton de mise en marche est en position Arrêt.
[Seuls les produits avec 3P fiche]
INSTRUCTIONS DE MISE À LA TERRE
Ce produit doit être mis à la terre. En cas de défaillance matérielle ou de panne, la mise à la terre fournit un chemin de moindre résistance au courant électrique afin de réduire le risque d’électrocution. Ce produit est équipé d’un câble avec un conducteur de protection et une fiche de mise à la terre. La fiche doit être branchée dans une prise appropriée correctement installée et mise à la terre conformément à tous les codes et règlements locaux.
DANGER - La connexion incorrecte du conducteur de protection peut présenter un risque d’électrocution.
Consultez un électricien ou un réparateur qualifié si vous avez des doutes en ce qui concerne la mise à la terre du produit. Ne modifiez pas la fiche fournie avec le produit – si elle n’est pas adaptée à la prise, faites installer une prise correcte par un électricien qualifié.
PRECAUTION
Indique un risque potentiel qui peut entraîner la détérioration, ou des dommages, pour l’appareil ou ses propriétés, si celui-ci n’est pas manipulé correctement.
Description de la l'emplacement de la reference (Le cas échéant):
Anglais phrase: The nameplate label is located on the underside of the instruments, as indicated below.
Français phrase: La reference commerciale est inscrite sur une etiquette en dessous de votre instrument, conformement a l’indication ci-dessous.
Votre piano doit être placé à un endroit tel que sa position n’altère pas sa propre ventilation. Gardez une distance minimum de 5 cm autour de l’instrument pour une aération suffisante.
WARNING - When using electric products, basic precautions should always be followed, including the following.
WARNING
Indicates a potential hazard that could result in death or serious injury if the product is handled incorrectly.
The product should be connected to an AC outlet of the specified voltage.
120V 230V 240V
●
If you are going to use an AC power cord,
make sure that its has the correct plug shape
and conforms to the specified power voltage.
●
Failure to do so may result in fire.
Do not insert or disconnect the power cord plug with wet hands.
Doing so may cause electric shock.
Take care not to allow any foreign matter to enter the product.
Entry of water, needles or hair pins may result in breakdown or short-circuit.
The product shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the product.
Doing so may cause the chair to fall over or your fingers to be trapped, resulting in injury.
The chair must be used properly (it must be used only when playing the product).
●
Do not play with it or stand on it.
●
Only one person is allowed to sit on it.
●
Do not sit on it when opening the lid.
●
Re-tighten the bolts occasionally.
When using the headphones, do not listen for long periods of time at high volume levels.
Doing so may result in hearing problems.
Do not lean against the keyboard.
Doing so may cause the product to fall over, resulting in injury.
Do not disassemble, repair or modify the product.
Doing so may result in product breakdown, electric shock or short-circuit.
When disconnecting the AC power cord's plug, always hold the plug and pull it to remove it.
●
Pulling the AC power cord itself may damage
the cord, causing a fire, electric shock or
short-circuit.
The product is not completely disconnected from the power supply even when the power switch is turned off. If the product will not be used for a long time, unplug the AC power cord from the AC outlet.
●
Failure to do so may cause fire in case of
lightning.
●
Failure to do so may over-heat the product,
resulting in fire.
This product may be equipped with a polarized line plug (one blade wider than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.
This product shall be near the AC outlet and the power cord plug in a position so that it can readily be disconnected in an emergency because electricity is always charging while the plug is in the AC outlet even in a power switch off condition.
CAUTION
Do not use the product in the following areas.
●
Areas, such as those near windows, where the product is
exposed to direct sunlight
●
Extremely hot areas, such as near a heater
●
Extremely cold areas, such as outside
●
Extremely humid areas
●
Areas where a large amount of sand or dust is present
●
Areas where the product is exposed to excessive
vibrations
Indicates a potential hazard that could result in injury or damage to the product or other property if the product is handled incorrectly.
Using the product in such areas may result in product breakdown.
Use the product only in moderate climates (not in tropical climates).
When you close the keyboard cover, close it gently.
Closing it roughly may trap your fingers, resulting in injury.
OFF
Failure to do so may cause breakdown of this product and other devices.
Before connecting cords, make sure that the power to this product and other devices is turned
OFF.
Do not drag the product on the floor.
Take care not to drop the product.
Do not place the product near electrical appliances such as TVs and radios.
Please lift up the product when moving it.
Please note that the product is heavy and must be carried by more than two persons.
Dropping the product may result in breakdown.
●
Doing so may cause the product to generate
noise.
●
If the product generates noise, move the
product sufficiently away from the electrical
appliance or connect it to another AC outlet.
Failure to do so may damage them, resulting in fire, electric shock or short-circuit.
When connecting the AC power cord and other cords, take care not to get them tangled.
Do not wipe the product with benzene or thinner.
Do not stand on the product or exert excessive force.
●
Doing so may result in discoloration or deformation
of the product.
●
When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the
product.
●
Doing so may cause the product to become
deformed or fall over, resulting in breakdown
or injury.
Do not place naked flame, such as lighted candles on the product.
Doing so may cause the illumination to fall over, resulting in fire.
Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.
Failure to do so may over-heat the product, resulting in fire.
The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.
The product should be serviced by qualified service personnel when:
•
The power supply cord or the plug has been damaged.
•
Objects have fallen, or liquid has been spilled into the product.
•
The product has been exposed to rain.
•
•
The product does not appear to operate normally or exhibits a marked change in performance.
The product has been dropped, or the enclosure damaged.
Notes on Repair
Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then contact the shop from which the product was purchased.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION:
Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.
An information on Disposal for users
If your product is marked with this recycling symbol it means that, at the end of its life, you must dispose of it separately by taking it to an appropriate collection point.
You should not mix it with general household waste. Disposing of this product correctly will prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
For further details, please contact your local authority.
(European Union only)
Instruction for AC power cord (U.K.)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Do not plug either terminal of the power cord to the the ground od AC outlet on the wall.
Canadian Radio Interference Regulations
This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference Regulations,
C.R.C., c. 1374.
FCC Information (U.S.A)
CAUTION :
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
The nameplate label is located on the underside of the instrument, as indicated below.
Products : Electronic Piano
Model Number : CS11/CS8
Responsible Party Name : Kawai America Corporation
Address :
Telephone
2055 East University Drive Rancho
Dominguez, CA 90220
310-631-1771
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Nameplate
This applies only to products distributed by Kawai America Corporation.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Important Safety Instructions
- 8 Table of Contents
- 10 Introduction
- 10 Welcome to the Classic Series
- 10 1. Feature Highlights
- 11 2. Owner’s Manual Conventions
- 12 Part Names and Functions
- 14 Setting Up the Piano
- 15 Adjusting the Volume / Using Headphones
- 16 Playing the Piano
- 16 Using the Pedals
- 17 Selecting Sounds
- 18 Dual Mode
- 20 Split Mode
- 22 Four Hands Mode
- 24 Reverb
- 26 Effects
- 28 Virtual Technician
- 28 1. Smart Mode
- 29 2. Advanced Mode
- 30 Metronome / Drum Rhythms
- 32 Registration Memories
- 32 1. Selecting a Registration memory
- 33 2. Storing a Registration memory
- 34 3. Registration Edit menu
- 35 Panel Lock
- 36 Music Menu
- 36 Demo Songs
- 37 Piano Music
- 38 Lesson Function
- 38 1. Selecting a lesson book/song
- 39 2. Listening to the selected lesson song
- 40 3. Lesson Function settings
- 41 4. Repeating sections of a lesson song
- 42 5. Recording a lesson song practice
- 43 6. Finger Exercises
- 44 Concert Magic
- 44 1. Performing a Concert Magic song
- 45 2. Concert Magic demo mode
- 46 3. Concert Magic settings
- 47 4. Concert Magic song arrangement types
- 48 Recorder
- 48 Song Recorder (Internal Memory)
- 48 1. Recording a song
- 50 2. Playing a song
- 51 3. Internal Recorder Edit menu
- 52 4. Erasing a part/song
- 53 5. Converting a song to an audio file
- 54 Audio Record/Playback (USB Memory)
- 54 1. Recording a MP3/WAV audio file
- 56 2. Playing an MP3/WAV audio file
- 58 3. Playing a MIDI song file
- 60 4. USB Recorder Edit menu
- 61 5. Converting a MIDI song file to an MP3/WAV audio file
- 62 6. Overdubbing a MP3/WAV audio file
- 63 Settings
- 63 Function menus
- 64 Basic Settings
- 65 1. Key Transpose
- 66 2. Song Transpose
- 67 3. Tone Control
- 68 User Tone Control
- 69 4. Speaker Volume
- 70 5. Line In Level
- 71 6. Wall EQ (CS11 only)
- 72 7. Tuning
- 73 8. Damper Hold
- 74 9. Split
- 75 10. Four Hands
- 76 11. LCD Contrast
- 77 12. Startup Setting
- 78 13. Factory Reset
- 79 14. Auto Power Off
- 80 Virtual Technician Settings
- 82 1. Touch Curve
- 83 User Touch Curve
- 84 2. Voicing
- 85 User Voicing
- 86 3. Damper Resonance
- 87 4. Damper Noise
- 88 5. String Resonance
- 89 6. Undamped String Resonance
- 90 7. Cabinet Resonance
- 91 8. Key-off Effect
- 92 9. Fall-back Noise
- 93 10. Hammer Delay
- 94 11. Topboard Simulation
- 95 12. Decay Time
- 96 13. Minimum Touch
- 97 14. Stretch Tuning
- 98 User Tuning
- 99 15. Temperament
- 100 User Temperament
- 101 16. Temperament Key
- 102 17. Key Volume
- 103 User Key Volume
- 104 18. Half-Pedal Adjust
- 105 19. Soft Pedal Depth
- 106 Phones Settings
- 107 1. SHS Mode
- 108 2. Phones Type
- 109 3. Phones Volume
- 110 USB MIDI (USB to Host connector)
- 111 USB Menu
- 112 1. Load Song
- 113 2. Load Registration All
- 114 3. Load Registration Single
- 115 4. Load Startup Setting
- 116 5. Save Internal Song
- 117 6. Save SMF Song
- 118 7. Save Registration All
- 119 8. Save Registration Single
- 120 9. Save Startup Setting
- 121 10. Rename File
- 122 11. Delete File
- 123 12. Format USB
- 124 Appendix
- 124 Assembly Instructions (CS8 only)
- 128 Connecting to Other Devices
- 129 Jack Panel
- 129 Headphone Panel
- 130 Troubleshooting
- 132 Demo Song List
- 133 Sound List
- 134 Program Change Number List
- 136 Drum Rhythm List
- 137 Specifications