• Do not allow children to play near the product.
NOTICE
Safety precautions
• If any malfunction or trouble occurs, consult the place of purchase nearest you.
•
Be sure to attach caps to any unused connectors.
•
For installation and adjustment of the product, consult a place of purchase.
• The components are designed to be fully waterproofed to withstand wet weather riding conditions; however, do not deliberately place them into water.
• Do not clean the bicycle with a high-pressure washer. If water gets into any of the components, operating problems or rusting may result.
• Do not turn the bicycle upside down. There is a risk of damage to the cycle computer and switch unit.
• Handle the components carefully, and avoid subjecting them to strong shock.
• Although the bicycle still functions as a normal bicycle even when the battery is removed, the light will not turn on if it is connected to the electric power system. Be aware that using the bicycle under these conditions will be considered non-observance of the road traffic laws in
Germany.
Connection and communication with PC
A PC linkage device can be used to connect a PC to the bicycle (system or components), and E-TUBE PROJECT can be used to carry out tasks such as customizing single components or the whole system and updating firmware.
• PC linkage device: SM-PCE1/SM-PCE02
• E-TUBE PROJECT: PC application
• Firmware: Software inside each component
Connection and communication with smartphone or tablet
• It is possible to customize single components or the system, and update firmware, using E-TUBE PROJECT for smartphones/tablets after connecting the bicycle (system or components) to a smartphone or tablet via Bluetooth ®
LE.
• E-TUBE PROJECT: Application for smartphones/tablets
• Firmware: Software inside each component
Care and maintennce
• Contact the place of purchase for updates of the component software. The most up-to-date information is available on the SHIMANO website.
• Do not use thinner or other solvents to clean any of the components. Such substances may damage the surface.
• For any questions regarding methods of installation and maintenance, please contact your place of purchase.
• Products are not guaranteed against natural wear and deterioration from normal use and aging.
•
For maximum performance we highly recommend
SHIMANO lubricants and maintenance products.
Labels
• Some of the important information contained in this user's manual is also indicated on the device label.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found with the following items, contact the place of purchase or a distributor.
• Does the drive train perform gear shifting smoothly?
• Are the components fixed securely and free from damage?
• Are the components securely installed to the frame/ handlebar/stem, etc.?
• Do any abnormal noises occur while riding?
• Is there sufficient charge remaining in the battery?
3
FCC compliance information
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
4