advertisement
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuse-holder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuse-holder.
Step 3:
Install the new fuse in the fuse-holder.
Step 4:
Replace the fuse-holder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Number of DMX channels:
DMX512 connection:
Sound-control:
100-240 V AC, 50/60 Hz~
15 W
2/3/4/5/7
3-pin XLR via built-in microphone
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
C
:
55° C
Min. distance from flammable surfaces: 0.5 m
Min. distance to lighted object:
Fuse:
0.1 m
T 0.5 A, 250V
LED type:
Number of LEDs:
Beam angle:
Flash rate:
Dimensions (WxDxH):
8 W TCL
6
16°
20Hz
110 x 220 x 210 mm
Weight: 1 kg
Accessories:
EUROLITE TPC-10 Coupler, silver
EUROLITE TPC-10 Coupler, black
EUROLITE Safety Bond A 3x600mm up to 5kg, silver
EUROLITE Safety Bond A 3x600mm up to 5kg, black
EUROLITE DMX cable XLR 3pin 3m black
PSSO DMX cable XLR 3pin 3m black Neutrik
SOMMER CABLE DMX cable XLR 3pin 3m black Hicon
No.
59006856
59006858
58010310
58010342
3022785H
30227810
30307457
SOMMER CABLE DMX cable XLR 3pin 3m black Neutrik 3030746Z
OMNITRONIC IEC Extension 3x1.0 3m black
ROADINGER Flightcase 4x SLS Size M
30235201
31000900
Please note: All information is subject to change without prior notice. 29.11.2017 ©
30/32 00109165, Version 1.1
!"
110 mm
220 mm
31/32 00109165, Version 1.1
Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany
D00108872.doc Version 1.0 Publ. 29/11/2017
advertisement