• To remove a scheduled event, select the event in the
Schedule Settings
screen and select
Delete
.
• To enable or disable the scheduled event without removing the scheduled event from the list, select the event in the
Schedule Settings
screen and select
Enable
/
Disable
.
• To enable or disable all scheduled events, select
Tool
from the menu bar, select
Schedule
, and then select
Enable Schedule
/
Disable Schedule
.
Parent topic:
Using Additional Functions
Related references
Projector Properties - Schedule
Making Security Settings
You can improve Epson Projector Management security by restricting access to the application and preventing anyone from changing its settings.
Setting the Password
Restricting the Use of the Application
Parent topic:
Using Additional Functions
Setting the Password
You can set a password that must be entered when the application is started or when the application lock function is enabled.
1.
Select
Tool
from the menu bar and select
Environment setup
.
2.
Select the
General
tab.
26
3.
Select
Password
.
4.
Do one of the following.
• Create a password for the first time: Leave the
Old password
field blank.
• Change an old password: Enter the existing password in the
Old password
field.
5.
Enter a new password in the
New password
field. The password can be up to 16 alphanumeric characters.
6.
Enter the same password again in the
New password (confirm)
field.
7.
Click
OK
.
The password is saved.
Parent topic:
Making Security Settings
Restricting the Use of the Application
You can lock the application functions so that they cannot be accessed by a third party.
Note:
When you set a password, you need to enter the password to release the application lock. Using a password improves the application security.
27
