2-4. Quick Installation
Connect Video Cable
1. Make sure both the LCD monitor and computer are turned OFF.
2. Remove rear panel covers if necessary.
3. Connect the video cable from the LCD monitor to the computer.
Audio in
DisplayPort USB Type B
Power Connector
HDMI mini DP
Audio out
USB Type A
14
3.A. Video and Audio Cable
For a MAC with Thunderbolt output, connect the mini DP end of the “mini DP to DisplayPort cable” to the Thunderbolt output of MAC. And connect the other end of the cable to the
DisplayPort connector on the rear of the monitor.
15
*This picture is for reference only
3.B. USB Cable
Connect the B type connector of USB cable to the USB 3.0 upstream port on the rear of the monitor. And connect the A type connector of USB cable to the USB downstream port on the computer.
A type
B type
16
*This picture is for reference only
3.C. Power Cable (and AC/DC adapter if required)
Connect the female connector of AC power cord to the power connector of monitor, and the AC plug of AC power cord to the
AC outlet.
17
*This picture is for reference only