4-6. OSD and Power Lock Settings. ViewSonic VP3268-4K, VP3268-4K-S

Eco Mode

Allows users to choose between various modes, based on power consumption.

DDC/CI (Display Data Channel Command Interface)

Activating this setting allows monitor control via the graphics card.

4-6. OSD and Power Lock Settings

• OSD Lock: Press and hold [2] and [3] for 10 seconds. If any other buttons are pressed the message OSD Locked will display for 3 seconds.

• OSD Unlock: Press and hold [2] and [3] again for 10 seconds.

• Power Button Lock: Press and hold [2] and [4] for 10 seconds.

• If the power button is pressed the message Power Button Locked will display for 3 seconds.

• With or without this setting, after a power failure, your display’s power will automatically turn ON when power is restored.

• Power Button Unlock: Press and hold [2] and [4] again for 10 seconds.

58