4.2. Digital Media Player Control Panel. soundsation GO-SOUND AMW series

ENGLISH

GO-SOUND AMW series User manual once connected the desired sound source slowly turn up levels 8, 9, 12 and

MASTER LEVEL (13) until the desired volume is reached and the CLIP light comes on occasionally. Always protect your hears if you are close when it is playing at high levels.

16) 5-Band Graphic EQ

This EQ optimizes the overall frequency response in order to better adapt the speaker to the environment in which it is used. It operates on 5-bands (100Hz, 330Hz, 1KHz,

3,3KHz, 10KHz) and with a gain/reduction of +/- 12dB.

17) Battery Level Status

When you connect the power cable, you can check battery charge (even without switching the unit on) basing on how many of the four LEDs are on. When charge level is below 25%, the red LED flashes and indicates that you need to re-charge the battery as soon as possible. For further details battery and charge function, please refer to “6.

RECHARGEABLE BATTERY” on page 16.

4.2. Digital Media Player Control Panel

GO-SOUND 12AMW and 15AMW feature a multimedia player that allows you to use these speakers even without audio sources or cables: just connect your smartphone or tablet via Bluetooth™ and that’s it. There is also a slot for SD-Cards and a USB plug to connect your devices.

The reader accepts audio streaming in any format via Bluetooth™. In the case of SD-

Cards and USB devices, it plays audio files in MP3 (up to 320kbps) and WAV (44.1kHz

- 16bit).

3

4

2

1

5 6 7 8 9 10

1. USB Type-A plug: lets you to read USB drives in MS-DOS

®

format

2. SD-Card slot: allows you to read SD-Cards in MS-DOS

®

format

12