ENGLISH
GO-SOUND AMW series User manual
3. 2x16 character alphanumeric LCD display
4. Remote control sensor: allows the speaker to be controlled by the supplied remote control. Fur details see “4.4. Remote Control” on page 14.
5. MODE button: by pressing repeatedly, it switches among Bluetooth™ mode, USB/
SD mode and OFF (player and display off).
6. Button (Play / Pause): plays audio of the selected device
7. (Stop): puts in stop playback
8. Button (Repeat): by pressing repeatedly, it allows you to browse through different play modes (valid only when using USB drives and SD-Cards):
• ONE
: Loop playback of the current song
• FOLDER
: Repeated playback of all songs in the current folder in ascending order;
• ALL
: Loop playback of all songs in all folders in ascending order
• RANDOM
: Random playback of any song in any folder
9. Button (Rewind): Press to go back one track; holding down for one second allows you to rewind to the beginning of current track
10. Button (Fast Forward): Press to move to next track; holding down for one second lets you skip to the end of current track
4.3. Using USB drives and SD-Cards
When you insert a USB drive into the outlet, the player reads the content automatically and plays the first track in ascending order, in “
ALL
” mode (or last mode used, if changed). The display shows on the upper-left corner the status of the player, that is play , stop or pause ; than it shows the letter “U”, indicating that you are playing an audio file from the connected USB device. In the case of SD-Card, the player displays the letter S.
Next to the U or S, the display shows the current playback mode (in this case
ALL
).
Then there is the time code of the current playing track. At the second line there are - from left to right - the song number in the current folder and its title.
NOTE: In the case of use of a USB drive and an SD-Card simultaneously, the reader will play the tracks on both devices, organizing them according to
13