Introduction. Dish Network Solo 111, 111 Series

Add to My manuals
104 Pages

advertisement

Introduction. Dish Network Solo 111, 111 Series | Manualzz

Chapter 1

Introduction

W

ELCOME TO

DISH N

ETWORK

TM

Thank you for choosing DISH Network. You are about to experience the excitement and convenience of Digital Broadcast Satellite (DBS) service, which delivers the very best in picture and sound quality. DISH

Network consistently provides state-of-the-art, products and satellitedelivered services — with high performance, ease of operation, and a wide variety of entertainment options.

O

VERVIEW

Before you use your satellite receiver

, you need to install the system or have it installed by a professional technician. For a professional installation, please call the Customer Service Center at 1-800-333-DISH (3474). If you install the system yourself, use the instructions in Chapter 4.

A vital part of the installation is to set up the receiver to get the latest software from the satellite signal. If you are installing a new system and follow the instructions in

Chapter 4, your receiver will automatically get this software.

For information on the system, read Chapter 2, Parts of the System beginning on page 5.

For information on any specific feature or function, read Chapter 3,

Using The System beginning on page 17.

For information on assembling and installing a satellite system, read

Chapter 4, Installation Instructions beginning on page 49.

If you have a problem operating the system or receive an error message, use the Troubleshooting Tables beginning on page 71.

C

ONVENTIONS

U

SED IN

T

HIS

G

UIDE

To make it easy for you to use this guide, we use the following conventions:

• The names of remote control buttons and modes are all uppercase.

Example: Press the POWER button.

• Menus and options that appear on the TV screen are in bold type.

Example: Open the

Program Guide

.

• Connections on the back of the receiver are in small capital letters.

Example:

S

AT

I

N

Select means to move the highlight to an onscreen option or choice in a list and press the SELECT button on the remote control.

Example: Select the

Locks

option.

Page 1

advertisement

Related manuals