advertisement
▼
Scroll to page 2
of
73
Data Transmission Specifications
Internet Services
TCP, UDP, HTTP, FTP, SMTP, POP3
GPRS Data Transmission
GPRS Class 12
Mobile Station Class B
PBCCH support
Coding scheme CS 1-4
CSD Data Transmission
Up to 14.4 kbps
V.110
Non-transparent mode
USSD support
Specifications for SMS
Point-to-point MO and MT
SMS cell broadcast
Text and PDU mode
001-0004-829 Rev01
Page 55 of 73
advertisement
Related manuals
advertisement
Table of contents
- 5 PREFACE
- 5 Copyright Notice
- 5 Modem Use
- 5 Interference Issues
- 6 Mobile Application Safety
- 6 Related Documents
- 7 ABBREVIATIONS
- 8 PRODUCT OVERVIEW
- 8 Module Identification
- 8 General Description
- 8 Features and Benefits
- 8 Catalog Part Number Breakdown
- 9 SMC Module Description
- 9 Top side reference
- 10 Bottom side reference
- 11 Pin Descriptions
- 12 DEVELOPMENT/TEST BOARD INTERFACE
- 12 Development/Test board
- 13 Accessories
- 14 GETTING STARTED USING THE SMC TEST BOARD
- 14 Connecting Up the SMC Test Board
- 14 HyperTerminal Settings
- 15 Verify SMC Modem Connectivity
- 16 Define the Packet Data Protocol (PDP) Context
- 17 Connect using the Dial-Up-Network Connection
- 20 SIM CARD SPECIFIC INFORMATION
- 21 What to do if PIN or password authentication fails?
- 23 CALL SETUP INFORMATION
- 23 Circuit Switched Data (CSD)
- 24 CSD Incoming Calls
- 24 CSD Outgoing Calls
- 25 General Packet Radio Service (GPRS)
- 25 GPRS Attach/Detach
- 26 Define the GPRS Context
- 26 GPRS PDP Context activation/ deactivation
- 26 GPRS Data Mode
- 27 Short Message Service (SMS)
- 27 Initializing SMS
- 28 Writing SMS
- 28 Reading SMS
- 28 Deleting SMS
- 28 Sending SMS
- 28 Receiving SMS
- 28 SMS Status Report
- 29 Internet Services
- 29 Step-by-step instructions on how to configure and use TCP/IP communications
- 29 Maximum number of profiles defined / used
- 31 SMC MODEM MODULE PROFILES
- 32 COMMON AT COMMAND REFERENCE GUIDE
- 34 AT COMMAND REFERENCE
- 34 AT Command Types
- 34 Command Line Syntax
- 35 Result Codes
- 35 Configuration Commands
- 37 Status Control Commands
- 38 Serial Interface Control Commands
- 39 Security Commands
- 40 Identification Commands
- 40 Call Related Commands
- 42 Network Service Commands
- 45 Internal Internet Service Commands
- 46 GPRS Commands
- 49 Short Message Service (SMS) Commands
- 50 SIM Related Commands
- 51 Hardware Related Commands
- 52 Factory Default AT Command values
- 54 SPECIFICATIONS
- 54 General Specifications
- 55 Data Transmission Specifications
- 56 Mechanical Specifications
- 57 SERVICE AND SUPPORT
- 57 Product Warranty, RMA and Contact Information
- 57 RMA Request
- 57 Product Documentation
- 57 Technical Support
- 58 Power Supply Issues
- 59 SMC-GPRS Power Supply Requirements
- 61 Windows XP
- 61 Add Standard Windows Modem
- 65 Configuring the Modem
- 66 Create a Dial-Up Networking (DUN) Connection