advertisement
Chapter 9
Printer Specifications
The chapter gives the specifications for the DYMO DiscPainter printer.
Physical Specifications
Print Method
Resolution
Height
Length
Width
Weight
Inkjet
Up to 1200 dpi
4.33" (110 mm)
10.62" (270 mm)
5.7" (145 mm)
2.65 lbs. (1.2 kg)
Power Specifications
Printer Power
Adapter
Requirements
Input
AC 100-240V
~1.0A 50-60Hz
Disc Service, Duty Cycle, and Warranty Specifications
2000 discs Average Disc Service
Life (discs)
Warranty One Year Limited
Environmental Specifications
Operating
Environment
Output
3.0A
12VDC, 36W
Normal office environment, 55°- 90° F (13°- 32° C), 20%-90% non-condensing humidity
47
Printer Specifications
Declaration of Conformity
This device has been tested and complies with the requirements of:
EN60950: Low Voltage Directive Product Safety
FCC Part 15 Class B
EN55022: Radiated and Conducted Emissions B
EN50082-1: Generic Immunity ESD, RF, and Transient Susceptibility
RoHS Compliant
Waste from Electric & Electronic Equipment (WEEE)
The equipment that you bought has required the extraction and use of natural resources for its production. It may contain hazardous substances for the health and the environment.
In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems.
Those systems will reuse or recycle most of the materials of your end life equipment in a sound way.
The crossed-bin symbol marked in your device invites you to use those systems.
If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administration.
You can also contact us for more information on the environmental performance of our products.
Limited Warranty
Sanford L.P. (“Sanford”) warrants to the original retail purchaser that your DYMO ® DiscPainter ™
CD/DVD printer will be free of defects in materials or workmanship, for one year from the original date of purchase, when used in accordance with all operating instructions. Normal wear and tear is not covered, nor is excessive use, abuse or damage caused by a user either intentionally or accidentally. Sanford also warrants that the consumable ink cartridge enclosed with the printer will perform to the manufacturer’s specified usage, which usage may expire before the expiration of the limited warranty for the DYMO DiscPainter printer.
DYMO DiscPainter CD/DVD printers are warranted for use only with ink cartridges made or approved by Sanford. Sanford will not be responsible for malfunction or damage caused by the use of other ink cartridges.
EXCEPT AS PROVIDED HEREIN, SANFORD MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, AND SANFORD SPECIFICALLY EXCLUDES WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SANFORD’S
LIABILITY UNDER THIS WARRANTY SHALL BE LIMITED TO REPAIR OR
REPLACEMENT OF THE PRINTER. SANFORD SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER OR NOT FORESEEABLE.
48
This warranty does not apply to refurbished or reconditioned products. This warranty covers only normal use in the United States and Canada. This warranty is not transferable. This warranty does not cover any color change or fading of prints or reimbursement of materials or services required for reprinting. This warranty does not cover damage to the DYMO DiscPainter printer caused by parts or supplies not manufactured, distributed or certified by Sanford. Sanford is not responsible for warranty service should the DYMO label or logo or serial number be removed or should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with non- DYMO products, or service other than by a Sanford-authorized service provider. If a claimed defect cannot be identified or reproduced, you will be held responsible for the costs incurred.
Proof of purchase showing the date of original purchase is required for warranty service.
Additionally, printer must be shipped back in the original packaging. If the product is not shipped in its original packaging, the warranty may become void.
You may obtain warranty service by contacting Sanford’s DYMO technical support department for a return authorization number. Products sent to Sanford for repair without authorization will be returned to you at your expense.
Contact the DYMO technical support department at (203) 588-2500 between 9 A.M. and 8 P.M.
Eastern time. A technical support specialist will ask you to describe the problem and provide the product’s serial number. Upon confirmation of the defect, the service representative will give you a
Return Material Authorization (RMA) for you to use and return the printer.
The RMA number must be clearly written on the side of the shipping container in which you return the DiscPainter TM . Unless otherwise instructed by us, the product must be sent freight prepaid to the following repair center:
DYMO Service Center
RMA#xxxxxx-xxxxxx (place your RA# here)
30 Commerce Road
Stamford, CT 06902-5506
DYMO will repair the defects covered under warranty at no charge within approximately three working days. DYMO will return the repaired product to you using an equivalent shipping method.
The original warranty on the printer remains – it does not restart from the repair date.
49
Printer Specifications
50
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Introduction
- 5 Printer Overview and Features
- 5 System Requirements
- 5 Mac OS System Requirements
- 5 Windows System Requirements
- 6 Your Printer at a Glance
- 6 About Discus for DYMO Software
- 6 Important Notes
- 7 For More Information
- 9 Working with Discs
- 9 About Printable CDs/DVDs
- 10 Drying Time
- 10 Loading Discs
- 11 Caring for Discs
- 13 Printing from Mac OS
- 13 Controlling Printer Features
- 14 Controlling Print Quality
- 14 Controlling Ink Density
- 15 Controlling Disc Settings
- 16 Customizing the Inner and Outer Diameter
- 17 Printing Multiple Copies
- 18 Printing to the DiscPainter Printer
- 18 Using Sample Files
- 18 General Printing Instructions
- 21 Printing From Windows
- 21 About the DiscPainter Status Monitor
- 22 Controlling Print Options
- 23 Controlling Print Quality
- 24 Controlling Ink Density
- 24 Controlling Disc Settings
- 25 Controlling Disc Inside and Outside Diameters
- 25 Restoring Default Settings
- 25 Printing Multiple Copies
- 25 Printing to the DiscPainter Printer
- 26 Using Sample Files
- 27 General Printing Instructions
- 29 Caring for Your Printer
- 29 Handling Inkjet Cartridges
- 29 Using Printer Services
- 30 Checking the Ink Level
- 31 Cleaning the Inkjet Cartridge
- 31 Purchasing New Inkjet Cartridges
- 32 Replacing the Inkjet Cartridge
- 33 Cleaning the Printer
- 34 Repacking the Printer for Travel
- 37 Printing Over a Network
- 37 Printing to a Shared Printer from Mac OS
- 37 Sharing a Printer on a Network
- 38 Adding a Shared Printer
- 39 Printing to a Shared Printer from Windows
- 39 Sharing a Printer on a Network
- 40 Installing a Network Printer
- 41 Frequently Asked Questions
- 41 What kind of discs can I print on with the DiscPainter printer?
- 41 What will happen if I don’t use an inkjet-printable disc?
- 41 What are hub-printable discs?
- 41 What type of discs are recommended for inkjet printing?
- 41 What is the difference between matte and glossy discs?
- 41 Where can I find inkjet-printable discs?
- 41 Why does my printed design look different on different discs?
- 42 What software do I need to print to my DiscPainter printer?
- 42 What are the system requirements for using the DiscPainter printer?
- 42 What kind of ink cartridge does the DiscPainter printer require?
- 42 How can I tell when the ink cartridge is running low on ink?
- 42 How do I install a new ink cartridge?
- 42 How long will the ink cartridge last if I am not printing very often? Will the ink dry out?
- 42 How do I clean the printer?
- 42 What is special about RadialPrint™ Technology?
- 42 Can I print on a disc twice?
- 43 Can I install more than one DiscPainter printer on my computer?
- 43 How do I pack the printer for travel?
- 45 Troubleshooting
- 45 Installation Problems
- 45 Windows Installation Problems
- 45 Mac OS Installation Problems
- 46 Printing Problems
- 46 Error Messages
- 47 Printer Status Lights
- 47 Ink Level Appears Empty
- 47 Printing is Too Light or Dark
- 47 Smudges Appear Outside of Design
- 47 Ink Pools on Disc
- 47 Printing a Self-Test
- 48 Opening the Front Cover
- 51 Printer Specifications
- 51 Physical Specifications
- 51 Power Specifications
- 51 Disc Service, Duty Cycle, and Warranty Specifications
- 51 Environmental Specifications
- 52 Declaration of Conformity
- 52 Waste from Electric & Electronic Equipment (WEEE)
- 52 Limited Warranty
- 55 Index