Removing The Power Button Board. Dell P22G, Vostro 1440


Add to my manuals
83 Pages

advertisement

Removing The Power Button Board. Dell P22G, Vostro 1440 | Manualzz

Removing The Power Button Board

9

1.

Follow the procedures in Before Working On Your Computer

.

2.

Remove the

battery .

3.

Remove the

keyboard .

4.

Remove the

palm rest .

5.

Peel the power button board cable from the adhesive affixing it to the palm rest.

6.

Flip the palm rest around and remove the screw that secures the power button board to the palm rest.

25

7.

Lift up the power button board and release the power button board cable through the opening.

Installing The Power Button Board

1.

Insert the power button board cable through the opening.

2.

Fix the power button board to its compartment.

3.

Install the screw to secure the power button board.

4.

Flip the computer around and attach the power button board cable to the palm rest.

5.

Install the palm rest

.

6.

Install the keyboard

.

7.

Install the battery

.

8.

Follow the procedures in After Working Inside Your Computer

.

26

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What are the steps to install a new battery?
Install the Secure Digital (SD) Card.Install the memory module.Install the palm rest.
How do I enter System Setup?
Boot up your computer.After the Dell logo appears, press F2 immediately.
How to enter system BIOS menu?
After the Dell logo appears, press F2 immediately.
How to open the display panel?
Remove the hinges cover.Remove the display assembly.Remove the display bezel.Remove the camera.

advertisement

Table of contents