Removing The Camera. Dell P22G, Vostro 1440


Add to my manuals
83 Pages

advertisement

Removing The Camera. Dell P22G, Vostro 1440 | Manualzz

Removing The Camera

1.

Follow the procedures in Before Working On Your Computer

.

2.

Remove the

battery .

3.

Remove the

display bezel

.

4.

Disconnect the camera cable from the camera module.

21

5.

Pry the latch, lift up the camera, and remove.

57

Installing The Camera

1.

Insert and align the camera module to its compartment.

2.

Connect the camera cable to the camera module.

3.

Install the display bezel .

4.

Install the battery

.

5.

Follow the procedures in After Working Inside Your Computer

.

58

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What are the steps to install a new battery?
Install the Secure Digital (SD) Card.Install the memory module.Install the palm rest.
How do I enter System Setup?
Boot up your computer.After the Dell logo appears, press F2 immediately.
How to enter system BIOS menu?
After the Dell logo appears, press F2 immediately.
How to open the display panel?
Remove the hinges cover.Remove the display assembly.Remove the display bezel.Remove the camera.

advertisement

Table of contents