advertisement
A Parts Information
This appendix provides parts information for the HP Integrity BL860c server blade components
(customer replaceable units [CRUs]).
Server Blade Components List
details the part numbers of the components (or CRUs) in the server blade.
NOTE: Part numbers are found by using the part nomenclature from this list to select the correct part from the HP Partsurfer. If a part that is not listed in the CRU list needs to be replaced, the Base
Unit Repair Kit is required. Remove processors, DIMMs and HDDs, and transfer these to the new base unit.
Table 29 CRU List
Description Manufacturing Part
Number
Replacement
Part Number
Exchange Part
Number
Memory
512 MB DDR2 memory
1 GB DDR2 memory
2 GB DDR2 memory
4 GB DDR2 memory
Processors
Itanium CPU 1.6 GHz 3 MB
Itanium CPU 1.4 GHz 12 MB
Itanium CPU 1.6 GHz 18 MB
Itanium CPU 1.42 GHz 12 MB dual core
Itanium CPU 1.6 GHz 12 MB single core
Itanium CPU 1.67 GHz 18 MB dual core
Internal Disks
36 GB, 10k RPM SAS hot-plug disk
36 GB, 15k RPM SAS hot-plug disk
72 GB, 10k RPM SAS hot-plug disk
72 GB, 15k RPM SAS hot-plug disk
146 GB, 10k RPM SAS hot-plug disk
Boards and Cards
Rev. A. BL860c system board
Rev. B. BL860c system board
AB563AX
AB564BX
AB565BX
AB566BX
AD272–2107B
AD271–2101B
AD270–2101B
AD394–2101C
AD395–2102C
AD396–2101C
375860–B21
431934–B21
375862–B21
431936–B21
431959–B21
AD217–60001
AD217–60101
AD272–2107B AD272–69001
AD271–2101B
AD270–2101B
AD271–69001
AD270–69001
AD394–2101CN AD394–69001
AD395–2102CN AD395–69001
AD396–2101CN AD396–69001
376596–001
432322–001
376597–001
432321–001
432320–001
AB563–69001
AB564–69002
AB565–69002
AB566–69002
2 disk drive SAS backplane
Front panel display assembly
Dual-port 4 Gbps FC mezzanine card
AD217–60003
AD217–2002B
411419–B21
AD217–67001 AD217–69001
•
AD217-69101
• AD217-69301
AD217–67003
AD217–67002
405920–001N 405920–001
146 Parts Information
Table 29 CRU List (continued)
Description Manufacturing Part
Number
Replacement
Part Number
431644–B21 436010–001N Direct adapter mezzanine card for connecting to the direct attach storage blade
Dual-port 4x InfiniBand mezzanine card
HPC 4x DDR IB mezzanine HCA
HP HPDC 4x DDR IB Cisco mezzanine HCA
SPS-Mod BLSYS ENet 1 GB / 10 GB
SPS-Port Aggregator FC 20 port
HP Smart Array P700m/512 Battery Option Kit
HP Smart Array P700M/512 Controller, no battery
410533–B21
406855–001
438760-B21
399593-B22
409153-B21
383280–B21
508226–B21
Smart Array P-Series Low Profile Battery Kit
Cables
Local I/O cable (SUV)
CPU MVR cable
Miscellaneous
Air baffle, CPU
Air baffle, zx2 controller
Chassis plug, rear
452348-B21
409496–001
AD217–2004A
AD217–3404B
AD217–3410A
AD217–3411B
Top cover, chassis
TPM module
AD217–2105B
314581–003
Server battery 3 V .22 A HR LI manganese dioxide (CR2032) 1420-0356
SPS-DRV DVD+R/RW 2x/2x MBII PA
410500–001N
410500–001N
410500–001N
416003–001
AD217–2004A
AD217–3404B
AD217–3410A
AD217–3411B
AD217–2105B
406059–001
1420-0356
375557–001
Exchange Part
Number
463010–001
410500–001
410500–001
410500–001
399725–001
410152–001
375557–0012
Server Blade Components List 147
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 HP Integrity BL860c Server Blade User Service Guide
- 3 Contents
- 10 About This Document
- 10 Intended Audience
- 10 New and Changed Information in This Edition
- 10 Publishing History
- 10 Document Organization
- 11 Typographic Conventions
- 12 HP-UX Release Name and Release Identifier
- 12 Related Documents
- 12 Contacting HP
- 12 Before You Contact HP
- 13 HP Contact Information
- 13 Subscription Service
- 13 Documentation Feedback
- 14 1 Overview
- 14 Server Blade Overview
- 14 Server Blade Dimensions
- 14 Server Blade Components
- 15 SAS Disk Drives
- 16 SAS Backplane
- 16 I/O Subsystem
- 16 PCIe MPS Optimization
- 17 PCI Expansion Blade
- 17 Memory Subsystem
- 17 DIMMs
- 18 Add-On Memory
- 19 Power Subsystem
- 19 Processor and Core Electronics Complex
- 19 Enclosure Information
- 19 Controls, Ports, and LEDs
- 20 Front Panel View
- 20 Front Panel LEDs
- 21 SAS Disk Drive LEDs
- 22 Controls and Ports
- 23 SUV Cable and Ports
- 23 Rear Panel View
- 25 2 General Site Preparation Guidelines
- 26 3 Installing the Server Blade Into the Enclosure
- 26 Safety Information
- 26 Installation Sequence and Checklist
- 26 Unpacking and Inspecting the Server Blade
- 27 Verify Site Preparation
- 27 Inspect the Shipping Containers for Damage
- 27 Unpack the Server Blade
- 27 Check the Inventory
- 27 Damaged Equipment Returns
- 27 Installing Additional Components
- 28 Service Tools Required
- 28 Adding a Hot-Plug SAS Disk Drive
- 29 Installing Internal Components
- 29 Removing the Access Panel
- 30 Installing a Processor
- 32 Installing DIMMs
- 33 Installing Mezzanine Cards
- 35 Installing a Mezzanine Card in Port 1
- 36 Installing a Mezzanine Card to Ports 2 and 3
- 37 Replacing the Access Panel
- 38 Installing and Powering On the Server Blade
- 38 Installing the Server Blade into the c-Class Enclosure
- 39 Installing the PCI Expansion Blade
- 39 Server Power States
- 40 Powering On the Server Blade
- 40 Accessing the Integrated Lights Out 2 Management Processor
- 40 Accessing the iLO 2 MP with DHCP Enabled
- 42 Accessing the iLO 2 MP with No Network Connection
- 42 Connecting the SUV Cable to the Server Blade
- 43 Connecting a Terminal to the Server Blade
- 44 Configuring the iLO 2 MP
- 44 Accessing iLO 2 MP After Establishing a Connection to the Server Blade
- 45 iLO 2 MP Security Requirements
- 45 Securing Remote Access to the Server Blade
- 45 Setting the Server Blade to Power On Automatically
- 46 Configuring Remote Access to the Server Blade
- 47 Remote Access Allowed
- 48 Remote Access Not Allowed
- 48 Accessing EFI or the OS from iLO 2 MP
- 49 EFI Boot Manager
- 49 Saving EFI Configuration Settings
- 49 Booting and Installing the Operating System
- 49 Operating System is Loaded onto the Server Blade
- 49 Operating System is Not Loaded onto the Server Blade
- 49 Loading the Operating System Using HP-UX Ignite
- 49 OS Login Prompt
- 50 Server Blade to Enclosure Interface
- 50 Port Locations on the Rear of the Server Blade Enclosure
- 50 Server Blade to Enclosure Interconnect Mapping
- 51 LAN / NIC Configuration
- 51 Configuring the HP 2 Internal Port SAS Host Bus Adapter
- 51 MPTUTIL Utility
- 52 Flashing Firmware on First Controller
- 52 Flashing BIOS and EFI Driver on the First Controller
- 53 Common Questions About Flashing Firmware
- 53 Viewing the VPD Information for EFI Driver and RISC Firmware
- 53 EFI Commands
- 53 DRVCFG Utility
- 53 Starting the DRVCFG Utility
- 53 Using the DRVCFG Utility
- 54 Configuration Utility Screens
- 54 DRVCFG Utility Screens
- 54 Adapter List Screen
- 55 Adapter Properties Screen
- 56 RAID Properties Screens
- 57 Select New Array Type Screen
- 57 Create New Array Screen
- 59 View Array Screen
- 60 Manage Array Screen
- 60 Manage Hot Spare
- 61 Synchronize Array
- 61 Activate Array
- 61 Delete Array
- 61 Exit the SAS Configuration Utility Screen
- 61 CFGGEN Utility
- 62 Starting CFGGEN
- 62 CFGGEN Operation
- 62 Rules for Creating IM Volumes and Hot Spare Disks
- 62 CFGGEN Utility Commands
- 63 CREATE Command
- 63 Syntax
- 63 Parameters
- 63 Operation
- 63 AUTO Command
- 63 Syntax
- 63 Parameters
- 63 Operation
- 63 HOTSPARE Command
- 63 Syntax
- 64 Parameters
- 64 Operation
- 64 Verify and Install the Latest Firmware
- 64 Verify the Latest Version of Firmware
- 64 Download the Latest Version of Firmware
- 65 Install the Latest Version of Firmware on the Server
- 66 4 Booting and Shutting Down the Operating System
- 66 Operating Systems Supported on the Server Blade
- 66 Installing the Operating System onto the Server Blade
- 66 Installing the OS Using a USB DVD Drive and the OS Disks
- 67 Installing the OS from the External USB DVD Device
- 68 Installing the OS Using HP Ignite–UX
- 68 Installing the OS Using vMedia
- 68 Configuring System Boot Options
- 70 Booting and Shutting Down HP-UX
- 70 Adding HP-UX to the Boot Options List
- 70 Adding the HP-UX Boot Option
- 71 HP-UX Standard Boot
- 71 Booting HP-UX (EFI Boot Manager)
- 72 Booting HP-UX (EFI Shell)
- 73 Booting HP-UX in Single-User Mode (EFI Shell)
- 74 Booting HP-UX in LVM-Maintenance Mode
- 74 Shutting Down HP-UX
- 75 Booting and Shutting Down HP OpenVMS
- 75 Adding OpenVMS to the Boot Options List
- 76 Booting OpenVMS
- 76 Booting OpenVMS (EFI Boot Manager)
- 76 Booting HP OpenVMS (EFI Shell)
- 77 Shutting Down OpenVMS
- 78 Booting and Shutting Down Microsoft Windows
- 78 Adding Microsoft Windows to the Boot Options List
- 79 Booting the Microsoft Windows Operating System
- 80 Shutting Down Microsoft Windows
- 81 Shutting Down Windows from the Command Line
- 82 Booting and Shutting Down Linux
- 82 Adding Linux to the Boot Options List
- 83 Booting the Red Hat Enterprise Linux Operating System
- 83 Booting Red Hat Enterprise Linux from the EFI Shell
- 84 Booting the SuSE Linux Enterprise Server Operating System
- 84 Booting SuSE Linux Enterprise Server from the EFI Shell
- 85 Shutting Down Linux
- 86 5 Troubleshooting
- 86 Methodology
- 86 General Troubleshooting Methodology
- 87 Recommended Troubleshooting Methodology
- 88 Basic and Advanced Troubleshooting Tables
- 91 Troubleshooting Tools
- 91 Front Panel LEDs
- 92 Locator LED
- 92 Server Health LED
- 93 Internal Health LED
- 93 NIC LEDs
- 93 SAS Disk Drive LEDs
- 94 LAN LEDs
- 94 Boot Process LEDs
- 95 Diagnostics
- 95 Online Diagnostics/Exercisers
- 96 Online Support Tool Availability
- 96 Online Support Tools List
- 96 Offline Support Tool Availability
- 96 Offline Support Tools List
- 97 General Diagnostic Tools
- 97 Fault Management Overview
- 97 HP-UX Fault Management
- 98 WBEM indication providers and EMS Hardware Monitors
- 98 Errors and Error Logs
- 98 Event Log Definitions
- 98 Event Log Usage
- 99 iLO 2 MP Event Logs
- 99 System Event Log Review
- 101 Supported Configurations
- 101 System Build-Up Troubleshooting Procedure
- 102 Troubleshooting Processors/Memory/SBA
- 102 Troubleshooting Processors
- 103 Processor Installation Order
- 103 Processor Module Behaviors
- 103 Customer Messaging Policy
- 103 Troubleshooting Blade Memory
- 103 Memory DIMM Installation Order
- 103 Memory Subsystem Behaviors
- 103 Customer Messaging Policy
- 103 Troubleshooting Blade SBA
- 104 Enclosure Information
- 104 Cooling Subsystem
- 104 Troubleshooting Communications Modules
- 104 I/O Subsystem Behaviors
- 104 Customer Messaging Policy
- 105 Troubleshooting Management Subsystem
- 105 Firmware
- 105 Identifying and Troubleshooting Firmware Problems
- 105 Firmware Updates
- 106 Troubleshooting the Server Interface (System Console)
- 106 Troubleshooting the Environment
- 106 Reporting Your Problems to HP
- 107 Online Support
- 107 Phone Support
- 107 Information to Collect Before you Contact Support
- 108 6 Removing and Replacing Components
- 108 Service Tools Required
- 108 Removing and Replacing a Hot-Plug SAS Disk Drive
- 108 Removing a SAS Disk Drive
- 109 Replacing a SAS Disk Drive
- 109 Removing and Replacing Disk Drive Blanks
- 109 Removing a Disk Drive Blank
- 110 Replacing a Disk Drive Blank
- 110 Preparing the Server Blade for Servicing
- 110 Powering Off the Server Blade
- 111 Removing and Replacing the Server Blade from the Enclosure
- 111 Removing the Server Blade From the Enclosure
- 111 Replacing the Server Blade in the Enclosure
- 112 Removing and Replacing the Server Blade Access Panel
- 112 Removing the Server Blade Access Panel
- 112 Replacing the Server Blade Access Panel
- 113 Removing and Replacing Internal Components
- 114 Removing and Replacing DIMMs
- 114 Removing a DIMM
- 114 DIMM Installation Order
- 115 DIMM Configuration
- 115 Replacing a DIMM
- 115 Removing and Replacing a Processor
- 116 Removing a Processor
- 117 Installing a Processor
- 119 Removing and Replacing the SAS Backplane
- 119 Removing the SAS Backplane
- 120 Installing the SAS Backplane
- 120 Removing and Replacing the Front Display Assembly
- 120 Removing the Front Display Assembly
- 121 Replacing the Front Display Assembly
- 121 Removing and Replacing the Server Battery
- 122 Removing the Server Battery
- 123 Replacing the Server Battery
- 123 Removing and Replacing the Mezzanine Cards
- 123 Removing a Mezzanine Card
- 124 Replacing a Mezzanine Card
- 124 Removing and Replacing a Cache Module
- 125 Removing a Cache Module
- 126 Replacing the Cache Module
- 130 Removing and Replacing the Low Profile Battery Backed Write Cache (BBWC) Battery
- 130 Removing the BBWC Battery
- 132 Replacing the BBWC Battery
- 140 Removing and Replacing the Trusted Platform Module
- 140 Removing the TPM
- 141 Replacing the TPM
- 142 Removing and Replacing the System Board
- 142 Removing the System Board
- 144 Replacing the System Board
- 146 A Parts Information
- 146 Server Blade Components List
- 148 B Server Upgrades
- 148 Processor Upgrades
- 148 Upgrading Versus Adding On
- 148 Firmware
- 148 Operating Systems
- 150 C Utilities
- 150 NVRAM Backup Utility
- 150 Downloading and Installing the NVRAM Backup Utility
- 150 Using the NVRAM Backup Utility
- 150 Syntax
- 150 Parameters
- 151 Extensible Firmware Interface
- 152 EFI Commands
- 154 EFI/POSSE Commands
- 154 Help
- 154 Syntax
- 154 Parameters
- 154 Operation
- 157 baud
- 157 Syntax
- 157 Parameters
- 157 Operation
- 157 boottest
- 157 Syntax
- 158 Parameters
- 158 cpuconfig
- 158 Syntax
- 158 Parameters
- 158 Operation
- 159 conconfig
- 159 Syntax
- 159 Parameters
- 159 Notes
- 160 default
- 160 Syntax
- 160 Parameters
- 160 Operation
- 160 errdump
- 160 Syntax
- 161 Parameters
- 161 Operation
- 161 info
- 161 Syntax
- 161 Parameters
- 165 ioconfig
- 165 Syntax
- 165 Parameters
- 165 Operation
- 166 lanaddress
- 166 Syntax:
- 166 Parameters
- 166 monarch
- 167 Syntax
- 167 Parameters
- 167 Operation
- 167 pdt
- 167 Syntax
- 167 Parameters
- 167 Operation
- 168 sysmode
- 168 Syntax
- 168 Parameters
- 168 Operation
- 169 Specifying Parameters
- 169 Using the Setup Utility
- 174 Using the Boot Option Maintenance Menu
- 174 EFI Shell Paths
- 174 Boot From a File
- 175 Add a Boot Option
- 175 Delete Boot Option(s)
- 175 Change Boot Order
- 176 Manage BootNext Setting
- 176 Set Auto Boot TimeOut
- 177 Select Active Console Output Devices
- 177 Select Active Console Input Devices
- 178 Select Active Standard Error Devices
- 178 Using the System Configuration Menu
- 179 Security/Password Menu
- 179 Resetting Passwords
- 179 Integrated Lights Out 2 Management Processor
- 180 Index