Appendix. Samsung 1100P

1100pe6.book Page 22 Tuesday, January 4, 2000 1:46 PM

Appendix

PowerSaver

This monitor has a built-in power management system called PowerSaver . This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The available modes are “On,” “Standby,”

“Suspend,” and “Off”.

This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See the table below for details.

Table 1. Power-saving modes

State

Horizontal Sync

Vertical Sync

Video

Power

Indicator

Power

Consumption

Normal

Operation

Active

Active

Active

Green

140W (Max.)

120W (Nom.)

Power-Saving Function mode (EPA/NUTEK)

Standby Mode Suspend Mode

Position A1

Power-off Mode

Position A2

Inactive

Active

Blanked

Active

Inactive

Blanked

Inactive

Inactive

Blanked

Amber Amber/Green

Blinking

(0.5 sec interval)

Amber

Blinking

(1 sec interval)

60W(Nom.) Less than 15W Less than 3W

NOTE: This monitor automatically returns to normal operation when horizontal and vertical sync return. This occurs when you move the computer’s mouse or press a key on the keyboard.

This monitor is EPA E NERGY S TAR

® compliant and NUTEK compliant when used with a computer equipped with VESA DPMS functionality.

For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

22