80 Adapter Web Pages
Use the Services Page
To use the Services page to change the password for the Configuration web page or disable the Web server, complete these procedures.
1. From the Web page, click the Services tab at the top of the page or panel on the left.
The Services tab opens.
2. From the Services tab, make these entries:
• Click in the Enable box to change whether the Web server runs after the module is reset.
• Change the password by typing the new value for New Password and
Confirm Password, noting the following.
– The entry is case sensitive.
– The default value is the word password.
3. Click Apply Changes.
Work with the Browse
Chassis Page
Use the Browse Chassis page for the following.
• See what modules are present on the system.
• Run a query from slot 1 to slot 63.
• Display the modules found based on the query.
• Provide an easy way to see what modules the adapter is recognizing on your system.
Publication 1734-UM011D-EN-P - May 2011
Adapter Web Pages 81
To work with the Browse Chassis page, follow these procedures.
1. From the Home page, click Browse Chassis.
Before the query completes, this note about the disabled module hyperlinks appears.
Check Increase timeout to increase the time of the browse query and time the modules get to respond to the query, which is useful when browsing a busy system.
2. From the Browse Chassis page, leave the Display compact check box unchecked, if desired, unless you want to decrease the font size, making it easier to read the full page after the query.
3. Check the Increase timeout check box so a check mark appears, if desired.
This increases the time of the browse query and time the modules get to respond to the query. This function is useful when you are browsing a busy system.
4. Click Start to run the query, noting that you see a page such as the one in the the figure, which shows that module hyperlinks are disabled while browsing before the query completes or is cancelled.
Before the query completes, module hyperlinks are inactive.
If there is no response to the query, the Module not found message appears.
Before the query finds the module, the Requesting message appears.
Publication 1734-UM011D-EN-P - May 2011
82 Adapter Web Pages
After completion of a query, here is how a typical Browse Chassis page looks with the module hyperlinks active and the Display compact check box unchecked.
Click a module hyperlink to view information about the module.
Here is how a typical Browse Chassis page looks with the Display compact check box checked.
Publication 1734-UM011D-EN-P - May 2011
Click a module hyperlink to view information about the module.
5. From the Browse Chassis page, to view information about a particular module, click the Module Description hyperlink.
The Module Information page displays the following about the module:
• Product Name
• Vendor
• Product Type
• Product Code
• Module Revision
• Serial Number
• Status
Adapter Web Pages 83
Publication 1734-UM011D-EN-P - May 2011
84 Adapter Web Pages
Notes:
Publication 1734-UM011D-EN-P - May 2011
