advertisement
EXPOSURE ADJUSTMENTS
Select the exposure mode to be consistent with the type of originals to be copied. The selections are AUTO, TEXT,
TEXT/PHOTO and PHOTO.
AUTO
EXPOSURE
0
The automatic exposure mode is the default initial setting for this machine. In this mode, the characteristics of an original being copied are
“read” by the exposure system, and exposure adjustments are made automatically. To select an exposure mode more suitable for originals to be copied or to adjust the exposure manually, follow the procedure below.
exposure adjustment
1 Touch the [EXPOSURE] key.
0
AUTO
EXPOSURE
AUTO
8 1
/
X
11
2 Select [TEXT], [TEXT/PHOTO] or [PHOTO] based on the original to be copied.
TEXT
TEXT
/
PHOTO
PHOTO
NOTE
Exposure mode selection
TEXT: This mode is useful for producing dark text copies with minimum background.
TEXT/PHOTO: This provides the best balance for copying an original which contains both text and photos. This mode is also useful for copying printed photographs.
PHOTO: This mode provides the best copies of photographs with fine details.
3 Adjust the exposure level.
1
3
5
Touch the key to make darker copies. Touch the
key to make lighter copies.
NOTE
Exposure levels in the text mode
1 to 2: Dark originals such as newspaper
3: Normal density originals
4 to 5: Originals written with pencils or light color characters
After adjusting the exposure, follow any of the copying procedures.
To return to the automatic exposure mode, touch the
[EXPOSURE] key and select [AUTO]. The automatic exposure level can be adjusted using a key operator program. (page 33)
15 copy-2_Ep.P65
15 2/04/01, 19:17
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 INTRODUCTION
- 4 CONTENTS
- 5 PART NAMES AND FUNCTIONS (B/W scanner module/DSPF)
- 5 ● Exterior
- 6 ● Operation Panel
- 7 ● Touch Panel (basic screen of copy mode)
- 8 AUTOMATIC DOCUMENT FEEDER
- 8 ● Acceptable originals
- 9 SETTING ORIGINALS
- 11 NORMAL COPYING
- 11 ● Copying from the automatic document feeder
- 13 document feeder
- 14 ● Copying from the document glass
- 16 ● Automatic two-sided copying from the document glass
- 17 EXPOSURE ADJUSTMENTS
- 18 REDUCTION/ENLARGEMENT/ZOOM
- 18 ● Automatic selection (auto image)
- 19 ● Manual selection
- 20 SPECIAL PAPERS
- 21 SPECIAL MODES
- 21 ● Common operation procedure for using the special functions
- 22 ● Margin shift
- 23 ● Erase
- 24 ● Dual page copy
- 25 ● Pamphlet copy
- 26 ● Job build
- 27 ● Multi shot
- 28 JOB PROGRAM MEMORY
- 28 ● Storing a job program
- 29 ● Recalling a job program
- 29 ● Deleting a stored job program
- 30 INTERRUPTING A PRINT OR COPY RUN
- 31 MISFEED REMOVAL
- 31 ● Misfeed in the scanner module
- 32 TROUBLESHOOTING
- 33 SPECIFICATIONS
- 33 ● Copier
- 33 ● Scanner module
- 34 KEY OPERATOR PROGRAMS
- 34 ● Key operator program list
- 34 ● Using the key operator programs
- 35 ● Setting programs