advertisement
MISFEED REMOVAL
Misfeed in scanner module
When an original has misfed in the scanner module, remove the misfed original following the procedure below.
NOTES
● For misfeed removal in the main unit and other peripheral devices, see the “Operation manual (for printer operation and general information)”.
● If you press the [INFORMATION] key, detailed information for misfeed removal will be displayed on the touch panel.
1 Open the document feeding area cover and remove any misfed originals.
Document feeding area cover
■ A message may appear indicating the number of originals which must be returned to the document feeder tray. Return the originals to the document feeder tray and press the [START] key.
2 Close the document feeding area cover.
Close the cover securely so that cover clicks into place.
3 Open the document cover and turn the green rotating knob in the direction of the arrow to remove any misfed originals.
4 Close the document cover.
copy-2_Ep.P65
29 2/04/01, 19:18
29
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 INTRODUCTION
- 4 CONTENTS
- 5 PART NAMES AND FUNCTIONS (B/W scanner module/DSPF)
- 5 ● Exterior
- 6 ● Operation Panel
- 7 ● Touch Panel (basic screen of copy mode)
- 8 AUTOMATIC DOCUMENT FEEDER
- 8 ● Acceptable originals
- 9 SETTING ORIGINALS
- 11 NORMAL COPYING
- 11 ● Copying from the automatic document feeder
- 13 document feeder
- 14 ● Copying from the document glass
- 16 ● Automatic two-sided copying from the document glass
- 17 EXPOSURE ADJUSTMENTS
- 18 REDUCTION/ENLARGEMENT/ZOOM
- 18 ● Automatic selection (auto image)
- 19 ● Manual selection
- 20 SPECIAL PAPERS
- 21 SPECIAL MODES
- 21 ● Common operation procedure for using the special functions
- 22 ● Margin shift
- 23 ● Erase
- 24 ● Dual page copy
- 25 ● Pamphlet copy
- 26 ● Job build
- 27 ● Multi shot
- 28 JOB PROGRAM MEMORY
- 28 ● Storing a job program
- 29 ● Recalling a job program
- 29 ● Deleting a stored job program
- 30 INTERRUPTING A PRINT OR COPY RUN
- 31 MISFEED REMOVAL
- 31 ● Misfeed in the scanner module
- 32 TROUBLESHOOTING
- 33 SPECIFICATIONS
- 33 ● Copier
- 33 ● Scanner module
- 34 KEY OPERATOR PROGRAMS
- 34 ● Key operator program list
- 34 ● Using the key operator programs
- 35 ● Setting programs