M3028BT-EPB User’s Manual
2. Setup
2. Setup
This chapter describes the preparation for using this product, the procedure for starting up the emulator and how to change settings.
2.1 Flowchart of Starting Up the Emulator
The procedure for starting up the emulator is shown in Figure 2.1. For details, refer to each section hereafter. And, when the emulator does not start up normally, refer to “5. Troubleshooting” (page 78).
Check the package components.
▼
User registration
▼
Install the M16C R8C PC7501
Emulator Debugger.
▼
Refer to “1.1 Package Components (page 13).
Refer to “User Registration” (page 11).
Install the M16C R8C PC7501 Emulator Debugger for this product.
Connect the host machine.
Connect the PC7501 to the host machine with the LPT parallel interface cable, USB interface cable or LAN interface cable.
Set the interface selection switch on the rear panel of the PC7501 to the using interface.
▼
Connect the M3028BT-EPB to the emulator.
▼
Connect the M3028BT-EPB and the M3T-FLX160-EPB of the
PC7501.
Connect the power supply for the emulator.
▼
Connect the user system.
▼
Turning on the power supply.
▼
Connect a power supply for the emulator.
Connect the user system as occasion demands.
Check the LED display of the emulator.
▼
Start up the emulator debugger from the
High-performance Embedded Workshop.
▼
Set the operating environment of the emulator debugger.
▼
Debug a program with various functions of the emulator debugger.
Figure 2.1 Flowchart of starting up the emulator
Turn ON the power to the emulator and the user system as simultaneously as possible.
Check that the system status LED, and POWER CLOCK, RESET and WARNING of target status LED are lighting. When the user system is not connected, the POWER LED does not light up.
Start up the High-performance Embedded Workshop, and start up the emulator debugger.
Set the INIT dialog box and MCU Setting dialog box of the emulator debugger.
For how to use the emulator debugger, refer to the emulator debugger’s online manual.
REJ10J1459-0200 Rev.2.00 Sep 16, 2006 Page 20 of 86
