Configuring IBM AIX version 3.x. Apple Color LaserWriter 12/600 PS ation

Configuring IBM AIX version 3.x

1 Log in as root .

2 Assign an IP address and IP name to the printer, as described in “Step 3: Assigning an

IP Address to the Printer,” earlier in this chapter.

3 Make sure the printer’s IP name and address are entered in the /etc/hosts file.

4 At the UNIX prompt, type the following to run the SMIT utility: smit

5 To add a remote queue, choose the following items from the SMIT menu:

Print System Management

Add a Print Queue

Remote

Standard Processing

A form appears for you to define a remote printer.

6 Enter information into the remote printer form, as follows: m

Name of queue to add Type the local queue name users will use as the name for the printer.

m

Host name of remote server Type the printer IP name assigned to the printer as described in “Step 3: Assigning an IP Address to the Printer,” earlier in this chapter.

m

Name of queue on remote printer Type raw m

Type of print spooler or remote server Select BSD.

7 Click Do.

8 Click Done.

9 Choose Exit from the Exit menu.

Setting Up the Printer for UNIX Users 67