Card reader. Acroprint Acrocomm program, Data Collection Terminal (ADCT) Hardware

Card reader

The terminal has an internal magnetic stripe card reader. The magnetic stripe on the card should be on the right side when the card is swiped as shown below.

Bar Code - left side

Magnetic stripe right side

Optionally, the terminal can also have an internal bar code reader.

The card is swiped through in the same fashion, but the Bar Code should be on the left side of the card when swiped.

1.00" Min.

NOTE: For through-the-slot reading, Bar Code should be located on card as shown.

Operator interface 9