Using Quick Record. Radio Shack 14-1184, voice activated Microcassette Recorder
Add to My manuals24 Pages
advertisement
▼
Scroll to page 2
of
24
14-1184.fm Page 15 Wednesday, June 28, 2000 8:53 AM
5. To temporarily stop recording, slide
PAUSE away from OFF . To resume recording, slide PAUSE to OFF .
6. Recording stops when the tape reaches its end. To stop it sooner, press STOP/EJECT .
Using Quick Record
During playback, you can press RECORD to immediately start recording without
STOP/EJECT first.
PLAYING A TAPE
1. Load a microcassette tape.
2. Set TAPE SPEED to the speed used when the tape was recorded.
To listen to the tape at about 25% faster than normal speed, slide TAPE
SPEED to 2.4 FAST PLAY .
3. Press PLAY to begin play.
4. Adjust VOL/MIC SENS to the desired listening level.
5. The tape automatically stops when it reaches its end. Press STOP/EJECT to stop playback sooner.
Operation 15
advertisement
Key Features
- Voice-Activated Recording (VOX)
- Tape Counter
- Quick Review
- Quick Record
- Built-in Mic and Speaker
- External Mic Jack
- Earphone Jack
- Auto Stop
- Tape Speed Switch
- Fast Play
Related manuals
Frequently Answers and Questions
What is the recording time of this recorder?
The recording time depends on the tape type and speed used. With a MC-60 microcassette tape, you get 30 minutes per side at 2.4 cm/sec and 60 minutes per side at 1.2 cm/sec. MC-90 tapes offer longer recording time accordingly.
Can I use both internal and external microphones simultaneously?
No, using an external microphone automatically disables the built-in microphone.
How do I use the Quick Review feature?
During recording, slide the REW/REVIEW FAST-F/CUE switch to REW/REVIEW to listen to a portion of the recorded tape without stopping recording completely. Press RECORD to resume recording.