INSTRUCTIONS FOR INSTALLING A LIGHT
1. Get the light
2. Remove the profile frame
MT-01 Indice 0 Page 74
3. Remove the screws from the display housing
4. Connect the lighting cable as illustrated on the photograph
5. Attach the display housing with the four screws
MT-01 Indice 0 Page 75
6. Place the cable along the channel
7. Put the profile frame back on the door starting with the internal corners, then the external corners and concluding with the external sides
8. Clean the surface of the profile frame, remove the self-adhesive protective film from the light and place the lighting band in the profile
Page 76 MT-01 Indice 0
