LAN Port. EVOC EC7-1817LNAR

Chapter 2 Installation

Step 3: Please connect the 15-pin SATA power connector (black) to the SATA hard disk.

Step 4: Please connect the SATA data cable to the SATA hard disk.

Hot Unplug

Step 1: Uninstall the hard disk from the device manager.

Step 2: Unplug the data cable from the SATA hard disk.

Step 3: Unplug the SATA 15-pin power connector (black) from the SATA hard disk.

LAN Port

The board provides one 10/100/1000Mbps LAN port, LAN1, which supports

Wake-on-LAN, LAN PXE booting and AMT7.0 functions. ACTLED and LILED are the green and dual-color LEDs beside the Ethernet port, which respectively indicates the activity status and the speed of LAN. Please refer to the status description for each

LED:

EC7-1817LNAR - 17 -