2.3.3 Set up the Loudspeaker Amplifier. CyberData 010861, 010860, 010859, Part #010861
Add to My manuals44 Pages
advertisement
Installing the VoIP Loudspeaker Amplifier 17
2.3.3 Set up the Loudspeaker Amplifier
1. Click on the Speaker Setup button to open the Speaker Setup page. See
Figure 2-11. Loudspeaker Amplifier Setup
VoIP Loudspeaker Amplifier
2. On the Loudspeaker Amplifier Setup page, enter values for the parameters indicated in
RTFM Announcement a
Table 2-10. Loudspeaker Amplifier Setup Parameters
Web Page Item
Change Web Access Username
Change Web Access Password
Re-enter New Password
Speaker Tone Before Paging
Speaker Tone After Initialization
Description
Use this field to change the Web Access Username.
Use this field to change the Web Access Password.
Use this field to re-enter a new password.
Enable/Disable the speaker tone (beep) before each page.
Enable/Disable the speaker tone (beep) after the system startup.
Enable/Disable the speaker tone (beep) and audio associated with the RTFM switch.
VoIP Loudspeaker Amplifier Operations Guide 930106B CyberData Corporation
advertisement
Related manuals
advertisement
Table of contents
- 7 1.1 Typical System Installation
- 8 1.2 Product Features
- 8 1.3 Supported Protocols
- 8 1.4 Supported SIP Servers
- 9 1.5 Product Specifications
- 11 2.1 Parts List
- 12 2.2 Loudspeaker Amplifier Setup
- 12 2.2.1 Loudspeaker Amplifier Components
- 13 2.2.2 Loudspeaker Amplifier Jumpers
- 14 2.2.3 Connect the Loudspeaker Amplifier
- 16 2.2.4 Confirm Operation
- 17 2.2.5 Confirm the IP Address, Test the Audio, and Check the Volume
- 18 2.2.6 Adjust the Volume
- 19 2.3 Configure the Loudspeaker Amplifier Parameters
- 19 2.3.1 Log in to the Configuration Home Page
- 21 2.3.2 Configure the Network Parameters
- 23 2.3.3 Set up the Loudspeaker Amplifier
- 24 2.3.4 Configure the SIP Parameters
- 27 2.4 Set up the MGROUPS
- 29 2.5 Upgrade the Firmware and Reboot the Loudspeaker Amplifier
- 31 2.5.1 Reboot the Loudspeaker Amplifier
- 33 2.6 Restore the Factory Default Settings
- 35 A.0 Mount the Enclosure
- 37 B.0 Set up a TFTP Server
- 37 B.0.1 In a LINUX Environment
- 37 B.0.2 In a Windows Environment
- 39 C.1 Frequently Asked Questions (FAQ)
- 39 C.2 Documentation
- 39 C.3 Contact Information
- 40 C.4 Warranty
- 33 asterisk
- 39 configurable parameters
- 42 gateway
- 42 IP address
- 42 subnet mask
- 42 username and password
- 42 default gateway
- 42 IP address