advertisement
IMAGING ACCESSORIES
RADIAL GUIDER
Specifically for use in prime focus, deep-sky imaging or astrophotography with Schmidt-Cassegrain telescopes. This accessory allows you to simultaneously photograph and guide through the optical tube assembly of your telescope. It also eliminates the problem of differential flexure, because you are guiding and photographing through the telescope.
Compatible with Celestron’s C5, C6, C8, C9.25, C11 and C14 telescopes the radial guider features a unique prism angle adjustment screw.
It must be used with a guiding eyepiece, camera T-Ring and drive corrector (dual axis preferred). Primarily for use with catadioptric telescopes.
This guider is a tremendous improvement over conventional off-axis guiders. Not only is the angle of the prism tunable, but it also maintains a fixed rigid camera orientation while still offering users the freedom to move the guiding eyepiece radially about 135°.
Model #94176 Radial Guider
NEXGUIDE AUTOGUIDER
The NexGuide stand-alone autoguider eliminates the need for a laptop computer in the field. Perfect for imaging with your DSLR camera.
• Stand-Alone autoguider eliminates the need for a
laptop computer
• Sensitive CCD sensor allows you to track on
fainter stars
• Larger chip provides more area for locating and
keeping guide star on chip
• Automatic calibration of each axis in addition to automatically setting guide
rate parameters
• Battery pack provides free and unrestricted use in the field
• Standard ring allows you to use any 1.25” eyepiece for centering and focusing
• 9-Button hand control allows quicker access to navigate menus
Model #93713 NexGuide Autoguider
EXTRA COUNTERWEIGHTS
Using accessories such as cameras,
Lens Shades, Tele-
Extenders and the 2” Diagonal #94186 #94203 #94189 #94187 will affect the balance of your Celestron Schmidt-Cassegrain telescope. Counterweights restore proper balance, increasing ease in handling and improved tracking accuracy.
You don’t need perfect balance to operate your telescope. In fact, it’s not always possible to achieve perfect balance with fixed-position weights. All you need to do is reduce, or eliminate, swing when R.A. and DEC locks are released. Celestron counterweights help you achieve the desired balance and stability with ease.
Model #94186 11 lb Counterweight for Use With CG-5 Mounts
Model #94203 11 lb counterweight for Use With CGEM Mounts
Model #94189 11 lb counterweight for CG-5 Mount
Model #94187 22 lb counterweight for CGE Pro Mount
18
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 SkyScout® Personal Planetarium® Accessories
- 4 Eyepieces
- 7 Barlow Lenses
- 8 Eyepiece & Filter Kits
- 9 Eyepiece Filters
- 10 Solar Filters
- 11 Binocular Viewer
- 11 Mirror & Erect Image Diagonals
- 12 Finderscopes
- 13 SkySync GPS & Accessories
- 14 NexRemote Software & Flashable Hand Controls
- 15 T-Rings
- 15 T-Adapters
- 17 NexImage Kit
- 17 Digital Camera Adapter
- 18 Piggyback Camera Mount
- 18 Deluxe Tele-Extender
- 18 Reducer/Corrector Lens
- 19 Radial Guider
- 19 NexGuide Autoguider
- 19 Counter Weights
- 20 Tripods
- 21 Vibration Suppression Pads
- 22 Wedges & Drives
- 23 Mounts
- 27 PowerTank & Power Adapters
- 28 Cases
- 28 Binocular Tripod Adapter
- 28 Visual Back
- 28 Night Vision Flashlight
- 28 LensPen
- 29 Lens Shades, CD-ROM, Sky Map
- 30 Appendix A – Eyepiece Filter Characteristics