Installation. Enable-IT 2173, 860 Pro Rev B

Figure 1. Typical application

The pair of 2173 models work together to create a transparent extension between two peered Ethernet LANs. Figure 1 shows a typical point-topoint application.

3.0 INSTALLATION

CAUTION

The Interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and mechanical serviceability.

To install the 2173 Ethernet Extender, do the following:

1. Connect the line interface between the units (refer to section 3.1,

“Connecting the Twisted-Pair Line Interface” on page 10)

Note See Figure 2 for the standalone unit’s rear panel arrangements.

2. Connect the Ethernet interface (refer to section 3.2, “Connecting the

10/100Base-T Ethernet Interface” on page 11).

3. Connect the power plug (refer to section 3.3, “Connecting Power” on page 12).

9